Prithviraj DR , Pujari
ML, Garg P , Shruthi DP. Accuracy
of the implant impression obtained from different impression materials and
techniques: review. J Clin Exp Dent.
2011;3(2):e106-11.
doi:10.4317/jced.3.e106
References
1. Zarb GA,
Schmitt A. The longitudinal clinical effectiveness of osseointegrated dental
implants: the
doi:10.1016/0022-3913(90)90177-E
2. Assunção WG, Cardoso A, Gomes EA, Tabata
LF, dos Santos PH. Accuracy of impression techniques for implants. Part 1 – influence
of transfer copings surface abrasion. J Prosthodont. 2008;17: 641-7.
doi:10.1111/j.1532-849X.2008.00308.x
PMid:19090889
3. Carr AB, Master J. The accuracy of implant verification casts compared with
casts produced from a rigid transfer coping technique. J Prosthodont.
1996;5:248-52.
doi:10.1111/j.1532-849X.1996.tb00507.x
PMid:9171498
4. Barrett MG, de Rijk WG, Burgess JO. The accuracy of six impression
techniques for osseointegrated implants. J Prosthodont. 1993; 2:75-82.
doi:10.1111/j.1532-849X.1993.tb00387.x
PMid:8242170
5. Wee AG. Comparison of impression materials for direct multi-implant
impressions. J Prosthet Dent. 2000; 83:323-31.
doi:10.1016/S0022-3913(00)70136-3
6. Wee AG, Aquilino SA, Schneider RL. Strategies to achieve fit in implant
prosthodontics: a review of the literature. Int J Prosthodont. 1999; 12:167-78.
PMid:10371920
7. Kohavi D. Complications in the tissue integrated prostheses components:
clinical and mechanical evaluation. J Oral Rehabil. 1993;20:413-22.
doi:10.1111/j.1365-2842.1993.tb01625.x
PMid:8350176
8. Jemt T, Lindén B, Lekholm U. Failures and complications in
127consecutively placed fixed partial prostheses supported by Branemark
implants: from prosthetic treatment to first annual checkup. Int J Oral
Maxillofac Implants. 1992; 7:40-4.
PMid:1398822
9. Tolman DE, Laney WR. Tissue-integrated prosthesis complications. Int J Oral
Maxillofac Implants. 1992; 7:477-84.
PMid:1299643
10. Kallus T, Bessing C. Loose gold screws frequently occur in fullarch fixed
prostheses supported by osseointegrated implants after 5 years. Int J Oral
Maxillofac Implants. 1994;9:169-78.
PMid:8206552
11. Lorenzoni M, Pertl C, Penkner K, Polansky R, Sedaj B, Wegscheider WA. Comparison
of the transfer precision of three different impression materials in
combination with transfer caps for the Frialit-2 system. J Oral Rehabil. 2000;
27:629-38.
doi:10.1046/j.1365-2842.2000.00594.x
PMid:10931257
12. Assif D, Fenton A, Zarb GA, Schmitt A. Comparative accuracy of implant
impression procedures. Int J Periodontics Restorative Dent. 1992; 12:113-21.
13. Assif D, Marshak B, Schmidt A. Accuracy of implant impression techniques. Int
J Oral Maxillofac Implants. 1996; 11:216-22.
PMid:8666454
14. Spector MR, Donovan TE, Nicholls JI. An evaluation of impression techniques
for osseointegrated implants. J Prosthet Dent. 1990; 63:444-7.
doi:10.1016/0022-3913(90)90235-5
15. Burawi G, Houston F, Byrne D, Claffey N. A comparison of the dimensional
accuracy of the splinted and unsplinted impression techniques for the Bone-Lock
implants system. J Prosthet Dent. 1997; 77:68-75.
doi:10.1016/S0022-3913(97)70209-9
16. Kim S, Nicholls JI, Han CH, Lee KW. Displacement of implant components from impressions to definitive casts.
Int J Oral Maxillofac Implants. 2006;21:747-55.
PMid:17066636
17. Inturregui JA, Aquilino SA, Ryther
JS, Lund PS. Evaluation of three impression techniques for osseointegrated oral implants. J Prosthet Dent. 1993; 69:503-9.
doi:10.1016/0022-3913(93)90160-P
18. Hsu CC, Millstein PL, Stein RS. A comparative analysis of the accuracy
of implant transfer techniques. J Prosthet Dent. 1993;69:588-93.
doi:10.1016/0022-3913(93)90287-X
19. Naconecy MM, Teixeira ER, Shinkai
RS, Frasca LC, Cervieri A. Evaluation
of the accuracy
of 3 transfer techniques for implant- supported
prostheses with multiple abutments. Int J Oral Maxillofac Implants. 2004; 19:192-8.
PMid:15101589
20. Del’Acqua MA, Arioli-Filho
JN, Compagnoni MA, Mollo Fd A Jr. Accuracy of impression and
pouring techniques for an implantsupported
prosthesis. Int J Oral Maxillofac Implants.
2008;23:226-36.
21. Assif D, Nissan J, Varsano
I, Singer A. Accuracy of implant impression
splinted techniques: effect of splinting
material. Int J Oral Maxillofac
Implants. 1999; 14:885-8.
PMid:10612928
22. Liou AD, Nicholls JI, Yuodelis RA, Brudvik JS. Accuracy of replacing
three tapered transfer impression copings in two elastomeric impression materials. Int J Prosthodont. 1993;6:377-83.
PMid:8240649
23. Carr AB. Comparison of impression techniques for a five-implant
mandibular model. Int J
Oral Maxillofac Implants.
1991;6:448-55.
PMid:1820314
24. Conrad HJ, Pesun IJ, DeLong
R, Hodges JS. Accuracy of two impression techniques with angulated implants. J Prosthet Dent. 2007; 97:349-56.
doi:10.1016/S0022-3913(07)60023-7
25. Lee H, So JS, Hochstedler JL, Ercoli
C. The accuracy of implant impressions:
A systematic review. J Prosthet Dent. 2008;100:285-91.
doi:10.1016/S0022-3913(08)60208-5
26. Daoudi MF, Setchell DJ,
Searson LJ. An evaluation of three
implant level impression techniques for single tooth implant. Eur J Prosthodont Restor Dent. 2004;12:9-14.
PMid:15058176
27. Carr AB. Comparison of impression techniques for a two-implant
15-degree divergent model. Int J Oral Maxillofac Implants.
1992;7:468-75.
PMid:1299642
28. Nissan J, Ghelfan O. The
press-fit implant impression coping technique. J Prosthet Dent. 2009; 101:413-4.
doi:10.1016/S0022-3913(09)60088-3
29. Assuncao WG, Filho HG, Zaniquelli
O. Evaluation of transfer impressions for osseointegrated implants at various angulations. Implant Dent. 2004;13:358-66.
PMid:15591998
30. Lee H, Ercoli C, Funkenbusch
PD, Feng C. Effect of subgingival depth of implant placement
on the dimensional accuracy of the
implant impression: an in vitro study.
J Prosthet Dent. 2008;
99:107-13.
doi:10.1016/S0022-3913(08)60026-8
31. Wenz HJ, Hertrampf K. Accuracy of impressions
and casts using different implant impression techniques in a multi-implant system with an internal
hex connection. Int J Oral Maxillofac Implants 2008;23:39-47.
PMid:18416411
32. Vigolo P, Fonzi F, Majzoub Z, Cordioli G. An evaluation of
impression techniques for multiple internal
connection implant prostheses. J Prosthet Dent. 2004;92:470-6.
doi:10.1016/j.prosdent.2004.08.015
PMid:15523336
33. Vigolo P, Majzoub Z, Cordioli G. In vitro comparison of master cast accuracy for
single-tooth implant replacement. J Prosthet Dent. 2000; 83:562-6.
doi:10.1016/S0022-3913(00)70015-1
34. Vigolo P, Majzoub Z, Cordioli G. Evaluation of the accuracy
of three techniques used for multiple implant
abutment impressions. J Prosthet Dent. 2003;89:186-92.
doi:10.1067/mpr.2003.15
PMid:12616240
35. Herbst D, Nel JC, Driessen
CH, Becker PJ. Evaluation of
impression accuracy for osseointegrated implant supported superstructures. J Prosthet Dent. 2000;83:555- 61.
doi:10.1016/S0022-3913(00)70014-X
36. Lorenzoni M, Pertl C, Penkner K, Polansky R, Sedaj B, Wegscheider WA. Comparison of the
transfer precision of three different impression materials in combination with transfer caps for the
Frialit-2 system. J Oral Rehabil. 2000; 27:629-38.
doi:10.1046/j.1365-2842.2000.00594.x
PMid:10931257
37. Vigolo P, Fonzi F, Majzoub Z, Cordioli G. Master cast accuracy in single-tooth implant replacement
cases: an in vitro comparison. A technical note. Int J Oral Maxillofac Implants. 2005;20:455-60.
PMid:15973958
38. Cabral LM, Guedes CG. Comparative
analysis of 4 impression techniques for implants. Implant
Dent. 2007; 16:187-94.
doi:10.1097/ID.0b013e3180587b3f
PMid:17563509
39. Choi JH, Lim YJ, Yim
SH, Kim CW. Evaluation of the accuracy of
implant-level impression techniques for internal-connection
implant prostheses in parallel and divergent
models. Int J Oral Maxillofac Implants. 2007;
22:761-8.
PMid:17974110
40. Daoudi MF, Setchell DJ,
Searson LJ. A laboratory investigation of the accuracy of
two impression techniques for single-tooth implants. Int J Prosthodont. 2001;14:152-8.
PMid:11843452