Bahillo J, Bortolotto
T, Roig M, Krejci I. Bulk Filling of Class II Cavities with a Dual-Cure
Composite: Effect of Curing Mode and Enamel Etching on Marginal Adaptation. J
Clin Exp Dent. 2014;6(5):e502-8.
doi:10.4317/jced.51558
References
1. Deliperi S, Bardwell D N.
An alternative method to reduce polymerization shrinkage in direct posterior
composite restorations. J Am Dent Assoc. 2002;133:1387-98.
http://dx.doi.org/10.14219/jada.archive.2002.0055
PMid:12403542
2. Dietschi D, Magne P, Holz
J. Recent trends in esthetic restorations for posterior teeth. Quintessence
Int. 1994;25:659-77.
PMid:9161244
3. Opdam NJM, Bronkhorst EM,
Roeters JM, Loomans BAC. A retrospective clinical study on longevity of
posterior composite and amalgam restorations. Dent Mater. 2007;23:2-8.
http://dx.doi.org/10.1016/j.dental.2005.11.036
PMid:16417916
4. Shimada Y, Tagami J.
Effects of regional enamel and prism orientation on resin bonding. Oper Dent.
2003;28:20-7.
PMid:12540114
5. Versluis A, Tantbirojn D,
Pintado MR, DeLong R, Douglas WH. Residual shrinkage stress distributions in
molars after composite restoration. Dent Mater. 2004;20:554-64.
http://dx.doi.org/10.1016/j.dental.2003.05.007
PMid:15134943
6. Opdam NJ, Roeters FJ,
Feilzer AJ, Verdonschot EH. Marginal integrity and postoperative sensitivity in
Class 2 resin composite restorations in vivo J Dent. 1998;26:555-62.
http://dx.doi.org/10.1016/S0300-5712(97)00042-0
PMid:9754743
7. Labella R, Lambrechts P,
Van Meerbeek B, Vanherle G. Polymerization shrinkage and elasticity of flowable
composites and filled adhesives. Dent Mater. 1999;15:128-37.
http://dx.doi.org/10.1016/S0109-5641(99)00022-6
PMid: 10551104
8. Tauböck TT, Bortolotto T,
Buchalla W, Attin T, Krejci I. Influence of light-curing protocols on
polymerization shrinkage and shrinkage force of a dual-cured core build-up
resin composite. Eur J Oral Sci. 2010;118:423-9.
http://dx.doi.org/10.1111/j.1600-0722.2010.00746.x
PMid:20662918
9. Radhika M, Sajjan G,
Kumaraswamy B, Mittal N. Effect of different placement techniques on marginal
microleakage of deep class-II cavities restored with two composite resin
formulations. J Conserv Dent. 2010;13:9-15.
http://dx.doi.org/10.4103/0972-0707.62633
PMid:20582213 PMCid:PMC2883801
10. Bortolotto T, Onisor I,
Krejci I. Proximal direct composite restorations and chairside CAD/CAM inlays:
Marginal adaptation of a two-step self-etch adhesive with and without selective
enamel conditioning. Clin Oral Investig. 2007;11:35-43.
http://dx.doi.org/10.1007/s00784-006-0076-x
PMid:17031673
11. Atlas AM, Raman P, Dworak
M, Mante F, Blatz MB. Effect of delayed light polymerization of a dual-cured
composite base on microleakage of Class 2 posterior composite open-sandwich
restorations. Quintessence Intet. 2009;40:471-7.
PMid:19587888
12. Andersson-Wenckert IE, van
Dijken JWV, Kieri C. Durability of extensive Class II open-sandwich
restorations with a resin-modified glass ionomer cement after 6 years. Am J
Dent. 2004;17:43-50.
PMid:15241909
13. Aksornmuang J, Nakajima M,
Foxton RM, Tagami J. Regional bond strengths of a dual-cure resin core material
to translucent quartz fiber post. Am J Dent. 2006;19:51-5.
PMid:16562347
14. Koubi S, Raskin A, Dejou
J, About I, Tassery H, Camps J, Proust JP. Effect of dual cure composite as
dentin substitute on marginal integrity of class II open-sandwich restorations.
Oper Dent. 2009;34:150-6.
http://dx.doi.org/10.2341/08-29
PMid:19363970
15. Bolhuis PB, de Gee AJ,
Kleverlaan CJ, El Zohairy AA, Feilzer AJ. Contraction stress and bond strength
to dentinfor compatible and incompatible combinations of bonding systems and
chemical and light-cured core build-up resin composites. Dent Mater.
2006;22:223-33.
http://dx.doi.org/10.1016/j.dental.2005.03.016
PMid:16443265
16. Kuijs RH, Fennis WMM,
Kreulen CM, Barink M, Verdonschot N. Does Layering Minimize Shrinkage Stresses
in Composite Restorations? J Dent Res. 2003;82:967-71.
http://dx.doi.org/10.1177/154405910308201206
PMid:14630896
17. Mitchem JC, Terkla LG,
Gronas DG. Bonding of resin dentin adhesives under simulated physiological
conditions. Dent Mater. 1988;4:351-3.
http://dx.doi.org/10.1016/S0109-5641(88)80048-4
PMid: 3152166
18. Tao L, Pashley DH. Dentin
perfusion effects on the shear bond strengths of bonding agents to dentin. Dent
Mater. 1989;5:181-4.
http://dx.doi.org/10.1016/0109-5641(89)90010-9
PMid: 2700178
19. Krejci I, Kuster M, Lutz
F. Influence of dentinal fluid and stress on marginal adaptation of resin
composites. J Dent Res. 1993;72:490-4.
http://dx.doi.org/10.1177/00220345930720020401
PMid:8423246
20. Bortolotto T, Ferrari M,
Tay F, Krejci I. Degradation of thermo-mechanically loaded adhesive Class V
restorations after 18 months of water storage. Am J Dent. 2007;20:83-9.
PMid:17542200
21. Frankenberger R, Strobel WO,
Kramer N, Lohbauer U, WinterScheidt B, Petschelt A. Evaluation of the fatigue
behavior of the resin-dentin bond with the use of different methods. J Biomed
Mater Res Part B Appl Biomater. 2003;67:712-21.
http://dx.doi.org/10.1002/jbm.b.10052
PMid:14598398
22. Tay FR, Pashley DH, Yiu
CKY, Sanares AME, Wei SHY. Factors contributing to the incompatibility between
simplified-step adhesives and chemically-cured or dual-cured composites. Part
I. Single-step self-etching adhesive. J Adhes Dent. 2003;5:27-40.
PMid:12729081
23. Tay FR, Suh BI, Pashley
DH, Prati C, Chuang SF, Li F. Factors contributing to the incompatibility
between simplified-step adhesives and self-cured or dual-cured composites. Part
II. Single-bottle, total-etch adhesive. J Adhes Dent. 2003;5:91-105.
PMid:14964676
24. Cheong C, King NM, Pashley
DH, Ferrari M, Toledano M, Tay FR. Incompatibility of self-etch adhesives with
chemical/dual-cured composites: two-step vs one-step systems. Oper Dent.
2003;28:747-55.
PMid:14653290
25. Peumans M, Kanumilli P, De
Munck J, Van Landuyt K, Lambrechts P, Van Meerbeek B. Clinical effectiveness of
contemporary adhesives: A systematic review of current clinical trials. Dent
Mater. 2005;21:864-81.
http://dx.doi.org/10.1016/j.dental.2005.02.003
PMid:16009415
26. Ritter AV, Ghaname E,
Pimenta LAF. Dentin and enamel bond strengths of dual-cure composite luting
agents used with dual-cure dental adhesives. J Dent. 2009;37:59-64.
http://dx.doi.org/10.1016/j.jdent.2008.09.006
PMid:18926614
27. Van Landuyt KL, Peumans M,
De Munck J, Lambrechts P, Van Meerbeek B. Extension of a one-step self-etch
adhesive into a multi-step adhesive. Dent Mater. 2006;22:533-44.
http://dx.doi.org/10.1016/j.dental.2005.05.010
PMid:16300826
28. Nayif MM, Nakajima M,
Aksornmuang J, Ikeda M, Tagami J. Effect of adhesion to cavity walls on the
mechanical properties of resin composites. Dent Mater. 2008;24:83-9.
http://dx.doi.org/10.1016/j.dental.2007.02.008
PMid:17448531
29. Peutzfeldt A, Asmussen E.
Determinants of in vitro gap formation of resin composites. J Dent.
2004;32:109-15.
http://dx.doi.org/10.1016/j.jdent.2003.08.008
PMid: 14749082
30. Oook, Miyazaki M, Rikut A,
Moore BK. Influence of polymerization mode of dual-polymerized resin core
foundation systems on bond strengths to bovine dentin. J Prosthet Dent.
2004;92:239-44.
http://dx.doi.org/10.1016/j.prosdent.2004.06.020
PMid:15343158
31. Lutz F, Krejci I. Resin
composites in the post-amalgam age. Compend Contin Educ Dent.
1999;20:1138-1144,1146,1148.
PMid:10850266