Yazdi FM, Moosavi H, Atai M, Zeynali M. Dentin bond
strength and degree of conversion evaluation of experimental self-etch adhesive
systems. J Clin Exp Dent.
2015;7(2):e243-9.
doi:10.4317/jced.51842
References
|
1. Van Landuyt KL, Mine A, De Munck J,
Jaecques S, Peumans M, Lambrechts P, et al. Are one-step adhesives easier to use
and better performing? Multifactorial assessment of
contemporary one-step self-etching adhesives. J Adhes
Dent. 2009;11:175-90. |
|
|
|
|
|
2. Van Landuyt
KL, Snauwaert J, De Munck
J, Peumans M, Yoshida Y, Poitevin A, et al. Systematic review of the chemical
composition of contemporary dental adhesives. Biomaterials. 2007;28:3757-85. |
|
|
|
|
|
3. Yoshida
Y, Nagakane K, Fukuda R, Nakayama Y, Okazaki M, Shintani H, et al. Comparative study on adhesive
performance of functional monomers. J Dent Res. 2004;83:454-8. |
|
|
|
|
|
4. Fukegawa D, Hayakawa S, Yoshida Y, Suzuki K, Osaka A, Van
Meerbeek B. Chemical interaction of phosphoric acid
ester with hydroxyapatite. J Dent Res. 2006;85:941-4. |
|
|
|
|
|
5. Yoshihara
K, Yoshida Y, Hayakawa S,
Nagaoka N, Irie M, Ogawa T, et al. Nanolayering of phosphoric acid ester monomer on
enamel and dentin. Acta Biomater.
2011;7:3187-95. |
|
|
|
|
|
6. Van Landuyt
KL, Yoshida Y, Hirata I, Snauwaert J, De Munck J, Okazaki M, et al. Influence of the chemical structure of
functional monomers on their adhesive performance. J Dent Res. 2008;87:757-61. |
|
|
|
|
|
7. Van Meerbeek
B, De Munck J, Yoshida Y,
Inoue S, Vargas M, Vijay
P, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and
future challenges. Oper Dent. 2003;28:215-35. |
|
|
|
|
|
8. Li N, Nikaido T, Takagaki T, Sadr A, Makishi P, Chen J,Tagami J. The role of functional monomers in bonding to
enamel: acid-base resistant zone and bonding performance. J Dent. 2010;38:722-30. |
|
|
|
|
|
9. Van Landuyt
KL, Snauwaert J, De Munck
J, Coutinho E, Poitevin
A, Yoshida Y, et al. Origin of interfacial droplets with
one-step adhesives. J Dent Res. 2007;86:739-44. |
|
|
|
|
|
10. Tay FR, Pashley DH, Suh BI, Carvalho RM, Itthagarun A. Single – step adhesive are permeable
membranes. J Dent. 2002;30:371-82. PMid:12554121 |
|
|
|
|
|
11. Tay FR, Pashley DH, Yiu Ck, Sanares AM, Wei SH.
Factors contributing to the incompatibility between simplified - step
adhesives and chemically - cured or dual - cured composites. Part I: single –
step self – etching adhesive. J Adhes Dent. 2003;5:27-40. |
|
|
|
|
|
12. Kanehira M, Finger WJ, Ishihata
H, Hoffmann M, Manabe A, Shimauchi
H, et al. Rationale behind the design and comparative evaluation of an
all-in-one self-etch model adhesive. J Dent. 2009;37:432-9. |
|
|
|
|
|
13. Tay FR, Pashley DH, Suh BI, Carvalho R, Miller M.
Single-step, self-etch adhesives behave as permeable membrans
after polymerization.Part I.Bond
strength and morphologic evidence. Am J Dent. 2004;17:271-8. |
|
|
|
|
|
14. Park J,
Ye Q, Topp EM, Misra A, Kieweg SL, Spencer P. Effect of photoinitiator
system and water content on dynamic mechanical properties of a light-cured bisGMA/HEMA dental resin. J Biomed Mater Res A. 2010;93:1245-51. PMid:19827107 |
|
|
|
|
|
15. Sakaguchi RL, Wiltbank BD, Shah
NC. Critical configuration analysis of four methods for measuring
polymerization shrinkage strain of composites. Dent Mater. 2004;20:388-96. |
|
|
|
|
|
16. Van Landuyt
KL, Mine A, De Munck J, Countinho
E, Peumans M, Jaecques S,
et al. Technique
sensitivity of water-free one-step adhesives. Dent Mater. 2008;24:1258-67. |
|
|
|
|
|
17. Tonetto MR, Pinto SC, Rastelli
Ade N, Borges AH, Saad JR, Pedro FL, et al. Degree
of conversion of polymer-matrix composite assessed by FTIR analysis. J Contemp Dent Pract. 2013;14:76-9. |
|
|
|
|
|
18.
McDonough WG, Antonucci JM, He J, Shimada Y, Chiang
MY, Schumacher GE, et al. A microshear test to
measure bond strengths of dentin-polymer interfaces. Biomaterials. 2002;23:3603-8. PMid:12109685 |
|
|
|
|
|
19. Scherrer SS, Cesar PF, Swain MV. Direct comparison of the
bond strength results of the different test methods: a critical literature
review. Dent Mater. 2010;26:e78-93. |
|
|
|
|
|
20. Moosavi H, Hariri I, Sadr A, Thitthaweerat S, Tagami J.
Effects of curing mode and moisture on nanoindentation
mechanical properties and bonding of a self-adhesive
resin cement to pulp chamber floor. Dent Mater. 2013;29:708-17. |
|
|
|
|
|
21. Ikemura K, Tay FR, Nishiyama N, Pashley DH, Endo
T. Design of new phosphonic acid monomers for dentaladhesives--synthesis of (meth) acryloxyalkyl
3-phosphonopropionates and evaluation of their adhesion-promoting functions. Dent Mater
J. 2006;25:566-75. |
|
|
|
|
|
22. Oguri
M, Yoshida Y, Yoshihara
K, Miyauchi T, Nakamura
Y, Shimoda S, et al. Effects of functional monomers and
photo-initiators on the degree of conversion of a dental adhesive. Acta Biomater. 2012;8:1928-34. |
|
|
|
|
|
23. Iwai
H, Fujita K, Iwai H, Ikemi T, Goto H, Aida M, et al.
Development of
MDP-based one-step self-etch adhesive--effect of additional 4-META on bonding
performance. Dent Mater J. 2013;32:1-9. |
|
|
|
|
|
24. Iwai H, Nishiyama N. Effect of calcium salt of functional monomer
on bonding performance. J Dent
Res. 2012;91:1043-8. |
|
|
|
|
|
25. Ikeda
M, Tsubota K, Takamizawa
T, Yoshida T, Miyazaki M, Platt
JA. Bonding
durability of single-step adhesives to previously acid-etched dentin. Oper Dent. 2008;33:702-9. |
|
|
|
|
|
26. Van Dijken JW. A prospective 8-year evaluation of a mild
two-step self-etching adhesive and a heavily filled two-step etch-and-rinse
system in non-carious cervical lesions. Dent Mater. 2010;26:940-6. |
|
|
|
|
|
27. Koga
K, Tsujimoto A, Ishii R, Iino M, Kotaku M, Takamizawa T, et al. Influence of oxygen inhibition on the
surface free-energy and dentin bond strength of self-etch adhesives. Eur J Oral Sci. 2011;119:395-400. |
|
|
|
|
|
28. Nunes TG, Garcia FC, Osorio R, Carvalho
R, Toledano M. Polymerization efficacy of
simplified adhesive systems studied by NMR and MRI techniques. Dent Mater.
2006;22:963-72. |
|
|
|
|
|
29. Malacarne-Zanon J, Pashley DH,
Agee KA, Foulger S, Alves
MC, Breschi L, et al. Effects of ethanol addition
on the water sorption/solubility and percent conversion of comonomers in model dental adhesives. Dent Mater. 2009 ;25:1275-84. |
|
|
|
|
|
30. Cadenaro
M, Antoniolli F, Codan B,
Agee K, Tay FR, Dorigo Ede S, et al. Influence of different initiators on the
degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content. Dent Mater. 2010;26:288-94. |
|