Hajizadeh H, Nemati-Karimooy A, Nasseh A, Rahmanpour N. Evaluating the shear bond strength of enamel and dentin with or without etching: a comparative study between dimethacrylate-based and silorane-based adhesives. J Clin Exp Dent. 2015;7(5):e563-8.

doi:10.4317/jced.52322

http://dx.doi.org/doi:10.4317/jced.52322

References

1. Buonocore MG. A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res. 1955;34:849-53.
http://dx.doi.org/10.1177/00220345550340060801
PMid:13271655

2. Cueto EI, Buonocore MG. Sealing of pits and fissures with an adhesive resin: its use in caries prevention. J Am Dent Assoc. 1967;75:121-8.
http://dx.doi.org/10.14219/jada.archive.1967.0205

PMid:5338243

3. Minguez N, Ellacuria J, Soler JI, Triana R, Ibaseta G. Advances in the history of composite resins. J Hist Dent. 2003;51:103-5.
PMid:14621259

4. Perdigao J. Dentin bonding as a function of dentin structure. Dent Clin North Am. 2002;46:277-301.
http://dx.doi.org/10.1016/S0011-8532(01)00008-8

PMid:12014035

5. Adebayo OA, Burrow MF, Tyas MJ. Bond strength test: role of operator skill. Aust Dent J. 2008;53:145-50.
http://dx.doi.org/10.1111/j.1834-7819.2008.00024.x
PMid:18494970

6. Pashley DH, Sano H, Ciucchi B, Yoshiyama M, Carvalho RM. Adhesion testing of dentin bonding agents: a review. Dent Mater. 1995;11:117-25.
http://dx.doi.org/10.1016/0109-5641(95)80046-8

PMid:8621032

7. al-Salehi SK, Burke FJ. Methods used in dentin bonding tests: an analysis of 50 investigations on bond strength. Quint Int. 1997;28:717-23.

PMid:9573861

8. Juloski J, Goracci C, Rengo C, Giovannetti A, Vichi A, Vulicevic ZR, et al. Enamel and dentin bond strength of new simplified adhesive materials with and without preliminary phosphoric acid-etching. Am J Dent. 2012;25:239-43.
PMid:23082390

9. Rengo C, Goracci C, Juloski J, Chieffi N, Giovannetti A, Vichi A, et al. Influence of phosphoric acid etching on microleakage of a self-etch adhesive and a self-adhering composite. Aust Dent J. 2012;57:220-6.
http://dx.doi.org/10.1111/j.1834-7819.2012.01689.x
PMid:22624765

10. Lima AF, da Silva VB, Soares GP, Marchi GM, Baggio Aguiar FH, Lovadino JR. Influence of previous acid etching on interface morphology and bond strength of self-etching adhesive to cavosurface enamel. Eur J Dent. 2012;6:56-62.
PMid:22229008 PMCid:PMC3252806

11. Li N, Nikaido T, Alireza S, Takagaki T, Chen JH, Tagami J. Phosphoric acid-etching promotes bond strength and formation of acid-base resistant zone on enamel. Oper Dent. 2013;38:82-90.
http://dx.doi.org/10.2341/11-422-L
PMid:22663196

12. Sabatini C. Effect of phosphoric acid etching on the shear bond strength of two self-etch adhesives. J Appl Oral Sci. 2013;21:56-62.
http://dx.doi.org/10.1590/1678-7757201302370
PMid:23559113 PMCid:PMC3881806

13. Devarasa GM, Subba Reddy VV, Chaitra NL, Swarna YM. Self-etching adhesive on intact enamel, with and without pre-etching. Microsc Res Tech. 2012;75:650-4.
http://dx.doi.org/10.1002/jemt.21106
PMid:22065398

14. Van Landuyt KL, Kanumilli P, De Munck J, Peumans M, Lambrechts P, Van Meerbeek B. Bond strength of a mild self-etch adhesive with and without prior acid-etching. J Dent. 2006;34:77-85.
http://dx.doi.org/10.1016/j.jdent.2005.04.001
PMid:15979226

15. Souza-Junior EJ, Araujo CT, Prieto LT, Paulillo LA. Influence of the LED curing source and selective enamel etching on dentin bond strength of self-etch adhesives in class I composite restorations. Lasers Med Sci. 2012;27:1175-82.
http://dx.doi.org/10.1007/s10103-011-1030-y
PMid:22120471

16. Pucci CR, de Oliveira RS, Caneppele TM, Torres CR, Borges AB, Tay FR. Effects of surface treatment, hydration and application method on the bond strength of a silorane adhesive and resin system to dentine. J Dent. 2013;41:278-86.
http://dx.doi.org/10.1016/j.jdent.2012.11.016
PMid:23207519

17. Ustunkol I, Yazici AR, Gorucu J, Dayangac B. Influence of laser etching on enamel and dentin bond strength of Silorane System Adhesive. Lasers Med Sci. 2015;30:695-700.
http://dx.doi.org/10.1007/s10103-013-1409-z
PMid:23912781

18. Giacobbi MF, Vandewalle KS. Microtensile bond strength of a new silorane-based composite resin adhesive. Gen Dent. 2012;60:148-52.

19. Batra C, Nagpal R, Tyagi SP, Singh UP, Manuja N. In vitro bonding effectiveness of three different one-step self-etch adhesives with additional enamel etching. J Investig Clin Dent. 2014;5:226-36.
http://dx.doi.org/10.1111/jicd.12039
PMid:23596010

20. Taschner M, Nato F, Mazzoni A, Frankenberger R, Falconi M, Petschelt A, et al. Influence of preliminary etching on the stability of bonds created by one-step self-etch bonding systems. Eur J Oral Sci. 2012;120:239-48.
http://dx.doi.org/10.1111/j.1600-0722.2012.00960.x
PMid:22607341

21. Koliniotou-Koumpia E, Kouros P, Dionysopoulos D, Zafiriadis L. Bonding strength of silorane-based composite to Er-YAG laser prepared dentin. Lasers Med Sci. 2015;30:509-16.
http://dx.doi.org/10.1007/s10103-013-1353-y
PMid:23709011

22. Sampaio RK, Wang L, Carvalho RV, Garcia EJ, Andrade AM, Klein-Junior CA, et al. Six-month evaluation of a resin/dentin interfa ce created by methacrylate and silorane-based materials. J Appl Oral Sci. 2013;21:80-4.
http://dx.doi.org/10.1590/1678-7757201302329
PMid:23559117 PMCid:PMC3881815

23. Silva e Souza MH Jr, Carneiro KG, Lobato MF, Silva e Souza Pde A, de Goes MF. Adhesive systems: important aspects related to their composition and clinical use. J Appl Oral Sci. 2010;18:207-14.
http://dx.doi.org/10.1590/S1678-77572010000300002

PMid:20856995

24. Manuja N, Nagpal R, Chaudhary S. Bonding efficacy of 1-step self-etch adhesives: effect of additional enamel etching and hydrophobic layer application. J Dent Child (Chic). 2012;79:3-8.

PMid:22449502