Ceci M, Pigozzo M, Scribante A, Beltrami R, Colombo M, Chiesa M, Poggio C. Effect of glycine pretreatment on the shear bond strength of a CAD/CAM resin nano ceramic material to dentin. J Clin Exp Dent. 2016;8(2):e146-52.

 

doi:10.4317/jced.52630

http://dx.doi.org/doi:10.4317/jced.52630

 

References

1. Erdemir U, Sancakli HS, Sancakli E, Eren MM, Ozel S, Yucel T, et al. Shear bond strength of a new self-adhering flowable composite resin for lithium disilicate reinforced CAD/CAM ceramic material. J Adv Prosthodont. 2014;6:434-43.
http://dx.doi.org/10.4047/jap.2014.6.6.434
PMid:25551002 PMCid:PMC4279040

 

2. Peumans M, Hikita K, De Munck J, Van Landuyt K, Poitevin A, Lambrechts P, et al. Effects of ceramic surface treatments on the bond strength of an adhesive luting agent to CAD-CAM ceramic. J Dent. 2007;35:282-8.
http://dx.doi.org/10.1016/j.jdent.2006.09.006
PMid:17092625

 

3. Koller M, Arnetzl GV, Holly L, Arnetzl G. Lava ultimate resin nano ceramic for CAD/ CAM: customization case study. Int J Comput Dent. 2012;15:159-64.
PMid:22891419

 

4. Kara HB, Dilber E, Koc O, Ozturk AN, Bulbul M. Effect of different surface treatments on roughness of IPS Empress 2 ceramic. Lasers Med Sci. 2012;27:267-72.
http://dx.doi.org/10.1007/s10103-010-0860-3
PMid:21110057

 

5. Bahr N, Keul C, Edelhoff D, Eichberger M, Roos M, Gernet W, et al. Effect of different adhesives combined with two resin composite cements on shear bond strength to polymeric CAD/CAM materials. Dent Mater J. 2013;32:492–501.
http://dx.doi.org/10.4012/dmj.2012-329
PMid:23719013

 

6. Kamada K, Yoshida K, Atsuta M. Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent. 1998;79:508-13.
http://dx.doi.org/10.1016/S0022-3913(98)70170-2

PMid:9597602

 

7. Rosentritt M, Behr M, Lang R, Handel G. Influence of cement type on the marginal adaptation of all-ceramic MOD inlays. Dent Mater. 2004;20:463-9.
http://dx.doi.org/10.1016/j.dental.2003.05.004
PMid:15081553

 

8. Graiff L, Piovan C, Vigolo P, Mason PN. Shear bond strength between feldspathic CAD/CAM ceramic and human dentine for two adhesive cements. J Prosthodont. 2008;17:294-9.
http://dx.doi.org/10.1111/j.1532-849X.2007.00294.x
PMid:18266655

 

9. Gutmann MS, Marker VA, Gutmann JL. Restoration surface roughness after air-polishing. Am J Dent. 2003;6:99-102.

PMid:8397993

 

10. Nishimura K, Nikaido T, Foxton RM, Tagami J. Effect of air-polishing on dentin adhesion of a self-etching primer bonding system. Dent Mater J. 2005;24:59-65.
http://dx.doi.org/10.4012/dmj.24.59
PMid:15881209

 

11. Frankenberger R, Lohbauer U, Tay FR, Taschner M, Nikolenko SA. The effect of different air-polishing powders on dentin bonding. J Adhes Dent. 2007;9:381-9.
PMid:17847641

 

12. Al-Dohan HM, Yaman P, Dennison JB, Razzoog ME, Lang B. Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent. 2004;91:349-55.
http://dx.doi.org/10.1016/j.prosdent.2004.02.009
PMid:15116036

 

13. Cacciafesta V, Sfondrini MF, De Angelis M, Scribante A, Klersy C. Effect of water and saliva contamination on shear bond strength of brackets bonded with conventional, hydrophilic, and self-etching primers. Am J Orthod Dentofacial Orthop. 2003;123:633-40.
http://dx.doi.org/10.1016/S0889-5406(03)00198-7

PMid:12806342

 

14. Saygili G, Sahmali S. Effect of ceramic surface treatment on the shear bond strengths of two resin luting agents to all-ceramic materials. J Oral Rehabil. 2003;30:758-64.
http://dx.doi.org/10.1046/j.1365-2842.2003.01027.x
PMid:12791165

 

15. Kamada K, Yoshida K, Atsuta M. Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent. 1998;79:508-13.
http://dx.doi.org/10.1016/S0022-3913(98)70170-2

PMid:9597602

 

16. Cura C, Saraçoglu A, Cötert HS. Effect of different bonding agents on shear bond strengths of composite-bonded porcelain to enamel. J Prosthet Dent. 2003;89:394-9.
http://dx.doi.org/10.1067/mpr.2003.58
PMid:12690353

 

17. Özcan M, Vallittu PK. Effects of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater. 2003;19:725-31.
http://dx.doi.org/10.1016/S0109-5641(03)00019-8

PMid:9597602

 

18. Schilke R, Baub O, Lisson JA, Schuckar M, Geutsen W. Bovine dentin as a substitute for human dentin in shear bond strength measurements. Am J Dent. 1999;12:92-6.
PMid:10477990

 

19. Edmunds DH, Whittaker DK, Green RM. Suitability of human, bovine, equine, and ovine tooth enamel for studies of artificial bacterial carious lesions. Caries Res. 1988;22:327-36.
http://dx.doi.org/10.1159/000261132
PMid:3214846

 

20. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, et al. Adhesion to enamel and dentin: current status and future challenges. Oper Dent. 2003;28:215-35.
PMid:12760693

 

21. Van Landuyt KL, Snauwaert J, De Munck J, Peumans M, Yoshida Y, Poitevin A, et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials. 2007;28:3757-85.
http://dx.doi.org/10.1016/j.biomaterials.2007.04.044
PMid:17543382

 

22. Carvalho RM, Chersoni S, Frankenenberger R, Pashley DH, Prati C, Tay FR. A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives. Biomaterials. 2005;26:1035-42.
http://dx.doi.org/10.1016/j.biomaterials.2004.04.003
PMid:15369692

 

23. Tay FR, King NM, Suh BI, Pashley DH. Effect of delayed activation of light cured resin composites on bonding of allin-one adhesives. J Adhes Dent. 2001;3:207-25.
PMid:11803709

 

24. Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrate. J Biomed Mater Res. 1982;16:265-73.
http://dx.doi.org/10.1002/jbm.820160307
PMid:7085687

 

25. Olmez A, Oztas N, Basak F, Sabuncuoglu B. A hystopathologic study of direct pulp-capping with adhesive resins. Oral Surg Oral Med Oral Pathol. 1998;86:98-103.
http://dx.doi.org/10.1016/S1079-2104(98)90157-3

PMid:9690253

 

26. Radovic I, Monticelli F, Goracci C, Vulicevic ZR, Ferrari M. Self-adhesive resin cements: a literature review. J Adhes Dent. 2008;10:251-8.
PMid:18792695

 

27. Behr M, Rosentritt M, Regnet T, Lang R, Handel G. Marginal adaptation in dentin of a self-adhesive universal resin cement compared with well-tried systems. Dent Mater. 2004;20:191-7.
http://dx.doi.org/10.1016/S0109-5641(03)00091-5

PMid:14706803

 

28. Stawarczyk B, Basler T, Ender A, Roos M, Özcan M, Hämmerle C. Effect of surface conditioning with airborne particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements. J Prosthet Dent. 2012;107:94-101.
http://dx.doi.org/10.1016/S0022-3913(12)60031-6

PMid:22304743

 

29. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater. 2004;20:963-71.
http://dx.doi.org/10.1016/j.dental.2004.03.002
PMid:15501325

 

30. Soares CJ, Soares PV, Pereira JC, Fonseca RB. Surface treatment protocols in the cementation process of ceramic and laboratory-processed composite restorations: a literature review. J Esthet Restor Dent. 2005;17:224-35.
http://dx.doi.org/10.1111/j.1708-8240.2005.tb00119.x
PMid:16231493

 

31. Flury S, Lussi A, Peutzfeldt A, Zimmerli B. Push-out bond strength of CAD/CAM-ceramic luted to dentin with self-adhesive cements. Dent Mater. 2010;26:855-63.
http://dx.doi.org/10.1016/j.dental.2010.05.001
PMid:20627368

 

32. Frankenberger R, Hartmann VE, Krech M, Kramer N, Reich S, Braun A, Roggendorf M. Adhesive luting of new CAD/CAM materials. Int J Comput Dent. 2015;18:9-20.
PMid:25911826