Khoroushi M, Shirban F, Sahraneshin-Samani M. Marginal
integrity of low-shrinkage and methacrylate-based
composite resins: Effect of three different hemostatic
agents. J Clin Exp Dent.
2016;8(2):e178-83.
doi:10.4317/jced.52782
References
1. Evancusky
JW, Meiers JC. Microleakage
of Compoglass-F and Dyract-AP
compomers in Class V preparations after salivary
contamination. Pediatr Dent. 2000;22:39-42. |
|
|
|
2. Kumar P1, Shenoy A, Joshi S. The effect of various surface
contaminants on the microleakage of two different
generation bonding agents: A stereomicroscopic study. J Conserv
Dent. 2012;15:265-9. |
|
|
|
3. Khosravi
K, Mousavinasab SM, Samani
MS. Comparison of microleakage in Class II cavities
restored with silorane-based and methacrylate-based composite resins using different
restorative techniques over time. Dent Res J (Isfahan). 2015;12:150-6. PMid:25878680 |
|
|
|
4. Poureslami
HR, Sajadi F, Sharifi M, Farzin Ebrahimi S. Marginal microleakage of low-shrinkage composite silorane in primary teeth: an in vitro study. J Dent Res
Dent Clin Dent Prospects. 2012;6:94-7. |
|
|
|
5.
Cenci MS, Pereira-Cenci
T, Donassollo TA, Sommer
L, Strapasson A, Demarco FF. Influence of thermal stress on marginal integrity of
restorative materials. J Appl Oral Sci. 2008;16:106-10. |
|
|
|
6. Kimmes
NS, Olson TL, Shaddy RS, Latta
MA. Effect of ViscoStat and ViscoStat
Plus on composite shear bond strength in the presence and absence of blood. J Adhes Dent. 2006;8:363-6. |
|
|
|
7. Fathpour
K, Khoroushi M. Effect of trichloroacetic
acid hydrogel on self-etch adhesive bond strength
to dental tissues. J Contemp Dent Pract. 2013;14:375-80. |
|
|
|
8. Harnirattisai
C, Kuphasuk W, Senawongse
P, Tagami J. Bond strengths of resin cements to
astringent-contaminated dentin. Oper Dent. 2009;34:415-22. |
|
|
|
9. Mohammadi
N, Kimyai S, Bahari M, Pournaghi-Azar F, Mozafari A.
Effect of aluminum chloride hemostatic agent on microleakage of class V composite resin restorations
bonded with all-in-one adhesive. Med Oral Patol
Oral Cir Bucal. 2012;17:e841-4. |
|
|
|
10. Ebrahimi
SF, Shadman N, Abrishami
A. Effect of ferric sulfate contamination on the bonding effectiveness of
etch-and-rinse and self-etch adhesives to superficial dentin. J Conserv Dent. 2013;16:126-30. |
|
|
|
11.
Bernades Kde O, Hilgert LA, Ribeiro AP, Garcia
FC, Pereira PN. The influence of hemostatic agents on dentin and enamel surfaces and dental
bonding: A systematic review. J Am Dent Assoc. 2014;145:1120-8. |
|
|
|
12. Ajami
AA, Kahnamoii MA, Kimyai
S, Oskoee SS, Pournaghi-Azar
F, Bahari M,et
al. Effect of three different contamination removal methods on bond strength
of a self-etching adhesive to dentin contaminated with an aluminum chloride hemostatic agent. J Contemp
Dent Pract. 2013;14:26-33. |
|
|
|
13. Kuphasuk
W, Harnirattisai C, Senawongse
P, Tagami J. Bond strengths of two adhesive systems
to dentin contaminated with a hemostatic agent. Oper Dent. 2007;32:399-405. |
|
|
|
14. O'Keefe KL, Pinzon LM,
Rivera B, Powers JM. Bond strength of composite to astringent-contaminated
dentin using self-etching adhesives. Am J Dent.
2005;18:168-72. |
|
|
|
15. Chaiyabutr
Y, Kois JC. The effect of tooth-preparation
cleansing protocol on the bond strength of self-adhesive resin cement to
dentin contaminated with a hemostatic agent. Oper Dent. 2011;36:18-26. |
|
|
|
16. Khoroushi
M, Karvandi TM, Kamali B,
Mazaheri H. Marginal microleakage
of resin-modified glass-ionomer and composite resin
restorations: Effect of using etch-and-rinse and self-etch adhesives. Indian J Dent Res. 2012;23:378-83. |
|
|
|
17. M R, Sajjan GS, B N K, Mittal N.
Effect of different placement techniques on marginal microleakage
of deep class-II cavities restored with two composite resin formulations. J Conserv Dent. 2010;13:9-15. |
|
|
|
18. Arslan
S, Ertaş H, Zorba
YO. Effect of a plant-based hemostatic agent on microleakage of self-etching adhesives. Med Oral Patol Oral Cir Bucal. 2013;18:e124-9. |
|
|
|
19.
Hashimoto M, Ito S, Tay
FR, Svizero NR, Sano H, Kaga
M, et al. Fluid movement across the resin-dentin interface
during and after bonding. J Dent Res. 2004;83:843-8. |
|
|
|
20.
Navarra CO, Cadenaro M, Armstrong SR, Jessop J, Antoniolli F, Sergo V, et al. Degree
of conversion of Filtek Silorane
Adhesive System and Clearfil SE Bond within the
hybrid and adhesive layer: an in situ Raman analysis. Dent Mater. 2009;25:1178-85. |
|
|
|
21. Khoroushi
M, Tavasoli M. The effect of trichloracetic
acid as a hemostatic and etching agent on the
morphological characteristics and shear bond strength of resin composite to
enamel. Oper Dent. 2010;35:187-93. |
|
|
|
22.
Tachibana A, Castanho GM,
Vieira SN, Matos AB. Influence of
blood contamination on bond strength of a self-etching adhesive to dental
tissues. J
Adhes Dent. 2011;13:349-58. |
|
|
|
23. Ayo-Yusuf OA, Driessen CH, Botha AJ. SEM–EDX study of prepared human
dentine surfaces exposed to gingival retraction fluids. J Dent. 2005;33:731-9. |
|
|
|
24. Tarighi
P, Khoroushi M. A review on common chemical hemostatic agents in restorative dentistry. Dent Res J (Isfahan). 2014;11:423-8. PMid:25225553 |