Kioleoglou I, Pissiotis A, Michalakis K. Accuracy of fit of implant-supported bars fabricated on definitive casts made by different dental stones. J Clin Exp Dent. 2019;11(1):e104-4.

doi:10.4317/jced.532743

______________________________________________________________________________________________________________________________________

References

1. Adell R, Lekholm U, Rockler B, Brånemark P-I. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Surg. 1981;10:387-416.

https://doi.org/10.1016/S0300-9785(81)80077-4

PMid:6809663

2. Brånemark PI. Osseointegration and its experimental background. J Prosthet Dent. 1983;50:399-410.

https://doi.org/10.1016/S0022-3913(83)80101-2

PMid:6352924

3. Albrektsson T. A multicenter report on osseointegrated oral implants. J Prosthet Dent. 1988;60:75-84.

https://doi.org/10.1016/0022-3913(88)90355-1

PMid:3042986

4. Adell R, Ericksson B, Lekholm U, Brånemark PI, Jemt T. Long-term follow-up study of osseointegrated implants in the treatment of totally edentulous jaws. Int J Oral Maxillofac Implants. 1990;5:347-359.

PMid:2094653

5. Zarb GA, Schmitt A. The longitudinal clinical effectiveness of osseointegrated dental implants: the Toronto study. Part I: Surgical results. J Prosthet Dent. 1990;63:451-457.

https://doi.org/10.1016/0022-3913(90)90237-7

PMid:2184231

6. Zarb GA, Schmitt A. The longitudinal clinical effectiveness of osseointegrated dental implants: the Toronto study. Part II: The prosthetic results. J Prosthet Dent. 1990;64:53-61.

https://doi.org/10.1016/0022-3913(90)90153-4

PMid:2200880

7. Zarb GA, Schmitt A. The longitudinal clinical effectiveness of osseointegrated dental implants: the Toronto study. Part III: Problems and complications encountered. J Prosthet Dent. 1990;64:185-194.

https://doi.org/10.1016/0022-3913(90)90177-E

PMid:2202818

8. Priest G. Single-tooth implants and their role in preserving remaining teeth: a 10-year survival study. Int J Oral Maxillofac Implants. 1999;14:181-188.

PMid:10212534

9. Sones AD. Complications with osseointegrated implants. J Prosthet Dent. 1989;62:581-585.

https://doi.org/10.1016/0022-3913(89)90084-X

PMid:2691663

10. Jemt T. Failures and complications in 391 consecutively inserted fixed prostheses supported by Brånemark implants in the edentulous jaw: a study of treatment from the time of prostheses placement to the first annual check-up. Int J Oral Maxilofac Implants. 1991;6:270-276.

PMid:1813395

11. Rangert B, Gunne J, Sullivan DY. Mechanical aspects of a Brånemark implant connected to a natural tooth: an in vitro study. Int J Oral Maxillofac Implants. 1991;6:177-186.

PMid:1809673

12. Gunne J, Jemt T, Linden B. Implant treatment in partially edentulous patients: a report on prostheses after 3 years. Int J Prosthodont. 1994;7:143-148.

https://doi.org/10.1097/00008505-199412000-00014

PMid:8003194

13. Kallus T, Bessing C. Loose gold screws frequently occur in full-arch fixed prostheses supported by osseontegrated implants after 5 years. Int J Oral Maxillofac Implants. 1994;9:169-178.

PMid:8206552

14. Byrne D, Houston F, Cleary R, Claffey N. The fit of cast and premachined implant abutments. J Prosthet Dent. 1998;80:184-192.

https://doi.org/10.1016/S0022-3913(98)70108-8

PMid:9710820

15. Binon PP. Implants and components: entering the new millennium. Int J Oral Maxillofac Implants. 2000;15:76-94.

PMid:10697942

16. Schwarz MS. Mechanical complications of dental implants. Clin Oral Implants Res. 2000;11(Suppl):156-158.

https://doi.org/10.1034/j.1600-0501.2000.011S1156.x

PMid:11168264

17. Nissan J, Gross M, Shifman A, Assif D. Stress levels for well-fitting implant superstructures as a function of tightening force levels, tightening sequence and different operators. J Prosthet Dent. 2001;86:20-23.

https://doi.org/10.1067/mpr.2001.115182

PMid:11458260

18. Sahin S, Cehreli MC. The significance of passive framework fit in implant prosthodontics: current status. Implant Dent. 2001;10:85-92.

https://doi.org/10.1097/00008505-200104000-00003

PMid:11450418

19. Al-Turki LE, Chai J, Lautenschlager EP, Hutten MC. Changes in prosthetic screw stability because of misfit of implant-supported prostheses. Int J Prosthodont. 2002;15:38-42.

PMid:11887597

20. Goodacre CJ, Bernal G, Rungcharassaeng K, Kan JYK. Clinical complications with implants and implant prostheses. J Prosthet Dent. 2003;90:121-132.

https://doi.org/10.1016/S0022-3913(03)00212-9

PMid:12886205

21. Johansson G, Palmqvist S. Complications, supplementary treatment and maintenance in edentulous arches with implant-supported fixed prostheses. Int J Prosthodont. 1990;3:89-92.

PMid:2196896

22. Carlson B, Carlsson GE. Prosthodontic complications in osseointegrated dental implant treatment. Int J Oral Maxillofac Implants. 1993;9:90-94.

PMid:8150518

23. Millington ND, Leung T. Inaccurate fit of implant superstructures. Part 1: stresses generated on the superstructure relative to the size of fit discrepancy. Int J Prosthodont. 1995;8:511-516.

PMid:8595110

24. Rangert B, Krogh PH, Langer B, Van Roekel N. Bending overload and implant fracture: a retrospective clinical analysis. Int J Oral Maxillofac Implants. 1995;10:326-334.

PMid:7615329

25. Skalak R. Biomechanical considerations in osseointegrated prostheses. J Prosthet Dent. 1983;49:843-848.

https://doi.org/10.1016/0022-3913(83)90361-X

PMid:6576140

26. Worthington P, Bolender CL, Taylor TD. The Swedish system of osseointegrated implants: problems and complications encountered during a 4-year trial period. Int J Oral Maxillofac Implants. 1987;2:77-84.

PMid:3325415

27. Frost HM. Vital biomechanics: proposed general concepts for skeletal adaptations to mechanical usage. Calcif Tissue Int. 1988;42:145-156.

https://doi.org/10.1007/BF02556327

PMid:3130163

28. Tolman DE, Laney WR. Tissue-integrated prosthesis complications. Int J Oral Maxillofac Implants. 1992;7:477-484.

PMid:1299643

29. Tan KB, Rubenstein JE, Nicholls JI, Yuodelis RA. Three-dimensional analysis of the casting accuracy of one-piece, osseointegrated implant-retained prostheses. Int J Prosthodont. 1993;6:346-363.

PMid:8240646

30. Jemt T, Lekholm U. Measurements of bone and framework deformations induced by misfit of implant superstructures. A pilot study in rabbits. Clin Oral Impl Res. 1998;9:272-280.

https://doi.org/10.1034/j.1600-0501.1998.090408.x

31. Duyck J, Ronold HJ, van Oosterwyck H, Naert I, Vander Sloten J, Ellingsen JE. The influence of static and dynamic loading on marginal bone reactions around osseointegrated implants: an animal experimental study. Clin Oral Impl Res. 2001;12:207-218.

https://doi.org/10.1034/j.1600-0501.2001.012003207.x

PMid:11359477

32. Gratton DG, Aquilino SA, Stanford CM. Micromotion and dynamic fatigue properties of the dental implant-abutment interface. J Prosthet Dent. 2001;85:47-52.

https://doi.org/10.1067/mpr.2001.112796

PMid:11174678

33. Hermann JS, Schoolfield JD, Schenk RK, Buser D, Cochran DL. Influence of the size of the microgap on crestal bone changes around titanium implants. A histometric evaluation of unloaded non-submerged implants in the canine mandible. J Periodontol. 2001;72:1372-1383.

https://doi.org/10.1902/jop.2001.72.10.1372

PMid:11699479

34. Melsen B, Lang NP. Biological reactions of alveolar bone to orthodontic loading of oral implants. Clin Oral Impl Res. 2001;12:144-152.

https://doi.org/10.1034/j.1600-0501.2001.012002144.x

PMid:11251664

35. King GN, Hermann JS, Schoolfield JD, Buser D, Cochran DL. Influence of the size of the microgap on crestal bone levels in non-submerged dental implants: A radiographic study in the canine mandible. J Periodontol. 2002;73:1111-1117.

https://doi.org/10.1902/jop.2002.73.10.1111

PMid:12416767

36. Spazzin AO, Dos Santos MB, Sobrinho LC, Consani RLX, Mesquita MF. Effects of horizontal misfit and bar framework material on the stress distribution of an overdenture-retaining bar system: a 3D finite element analysis. J Prosthodont. 2011;20:517-522.

https://doi.org/10.1111/j.1532-849X.2011.00759.x

PMid:21973281

37. Yanase RT, Binon PP, Jemt T, Gulbransen HJ, Parel S. How do you test a cast framework fit for a full-arch fixed implant supported prosthesis? Int J Oral Maxillofac Implants. 1994;9:469-474.

38. Kan JY, Rungcharassaeng K, Bohsali K, Goodacre CJ, Lang BR. Clinical methods for evaluating implant framework fit. J Prosthet Dent. 1999;81:7-13.

https://doi.org/10.1016/S0022-3913(99)70229-5

PMid:9878969

39. Romero GG, Engelmeier R, Powers JM, Canterbury AA. Accuracy of three corrective techniques for implant bar fabrication. J Prosthet Dent. 2000;84:602-607.

https://doi.org/10.1067/mpr.2000.111494

PMid:11125345

40. Abduo JA, Lyons KL. Effect of vertical misfit on strain within screw-retained implant titanium and zirconia frameworks. J Prosthodont Res. 2012;56:102-109.

https://doi.org/10.1016/j.jpor.2011.09.001

PMid:22093362

41. Klineberg IJ, Murray GM. Design of superdstructures for osseointegrated fixtures. Swed Dent J. 1985;Suppl 28:63-69.

PMid:3904064

42. Assif D, Fenton A, Zarb GA, Schmitt A. Accuracy of implant impression techniques: effect of splinting material. Int J Periodontics Restorative Dent. 1992;12:113-121.

43. Inturregui JA, Aquilino SA, Ryther JS, Lund PS. Evaluation of three impression techniques for osseointegrated oral implants. J Prosthet Dent. 1993;69:503-509.

https://doi.org/10.1016/0022-3913(93)90160-P

PMid:8483130

44. Jemt T. Three-dimensional distortion of gold-alloy castings and welded titanium frameworks: Measurement of precision of fit between completed implant prostheses and the master cast in routine edentulous situations. J Oral Rehabil. 1995;22:557-564.

https://doi.org/10.1111/j.1365-2842.1995.tb01049.x

PMid:7472725

45. Assif D, Marshak B, Schmitt A. Accuracy of implant impression techniques. Int J Oral Maxillofac Implants. 1996;11:216-222.

https://doi.org/10.1097/00008505-199600540-00028

46. Karl M, Winter W, Taylor TD, Heckmann SM. In vitro study on passive fit in implant-supported 5-unit fixed partial dentures. Int J Oral Maxillofac Implants. 2004;19:30-37.

PMid:14982352

47. Wenz HJ, Reuter HU, Hertrampf K. Accuracy of impressions and casts using different implant impression techniques in a multi-implant system with an internal hex connection. Int J Oral Maxillofac Implants. 2008;23:39-47.

PMid:18416411

48. Taylor TD, Agar JR, Vogiatzi T. Implant prosthodontics: current perspective and future directions. Int J Oral Maxillofac Implants. 2000;15:66-75.

PMid:10697941

49. Farman AG, Farman TT. RVG-ui: a sensor to rival direct-exposure intra-oral x-ray film. Int J of Comput Dent. 1999;2:183-196.

PMid:11351483

50. Hsu CC, Millstein PL, Stein RS. A comparative analysis of the accuracy of implant transfer techniques. J Prosthet Dent. 1993;69:588-593.

https://doi.org/10.1016/0022-3913(93)90287-X

PMid:8320644

51. Vigolo P, Millstein PL. Evaluation of master cast techniques for multiple abutment implant prostheses. Int J Oral Maxillofac Implants. 1993;8:439-446.

PMid:8270314

52. McCartney JW, Pearson R. Segmental framework matrix: master cast verification, corrected cast guide, and analog transfer template for implant-supported prostheses. J Prosthet Dent. 1994;71:197-200.

https://doi.org/10.1016/0022-3913(94)90031-0

PMid:8126676

53. Jemt T. In vivo measurements of precision of fit involving implant-supported prostheses in the edentulous jaw. Int J Oral Maxillofac. 1996;11:151-158.

PMid:8666445

54. Wee AG, Cheng AC, Eskridge RN. Accuracy of 3 conceptually different die systems used for implant casts. J Prosthet Dent. 2002;87:23-29.

https://doi.org/10.1067/mpr.2002.121110

PMid:11807480

55. Nomura GT, Reisbick MH, Preston JD. An investigation of epoxy resin dies. J Prosthet Dent. 1980;44:45-50.

https://doi.org/10.1016/0022-3913(80)90045-1

PMid:6929922

56. Schwartz HB, Leupold RJ, Thompson VP. Linear dimensional accuracy of epoxy resin and stone dies. J Prosthet Dent. 1981;45:621-625.

https://doi.org/10.1016/0022-3913(81)90422-4

PMid:7017112

57. Bailey JH, Donovan TE, Preston JD. The dimensional accuracy of improved dental stone, silverplated, and epoxy resin die materials. J Prosthet Dent. 1988;59:307-310.

https://doi.org/10.1016/0022-3913(88)90178-3

PMid:3279186

58. Duke P, Moore BK, Haug SP, Andres CJ. Study of the physical properties of type IV gypsum, resin-containing, and epoxy die materials. J Prosthet Dent. 2000;83:466-473.

https://doi.org/10.1016/S0022-3913(00)70043-6

PMid:10756298

59. Schäffer H, Dumfahrt H, Gausch K. Distance alterations of dies in saggital direction in dependence of the die material. J Prosthet Dent. 1989;61:684-688.

https://doi.org/10.1016/S0022-3913(89)80042-3

PMid:2657025

60. Millstein PL. Determining the accuracy of gypsum casts made from type IV dental stone. J Oral Rehab. 1992;19:239-243.

https://doi.org/10.1111/j.1365-2842.1992.tb01098.x

PMid:1500967

61. Kenyon BJ, Hagge MS, Leknius C, Daniels WC, Weed ST. Dimensional accuracy of 7 die materials. J Prosthod. 2005;14:25-31.

https://doi.org/10.1111/j.1532-849X.2005.00007.x

PMid:15733132

62. Chang WG, Vahidi F, Bae KH, Lim BS. Accuracy of three implant impression techniques with different impression materials ans stones. Int J Prosthodont. 2012;25:44-47.

PMid:22259795

63. Peyton FA, Liebold JP, Ridgley GV. Surface hardness, compressive strength and abrasion resistance of indirect die stones. J Prosthet Dent. 1952;2:381-389.

https://doi.org/10.1016/0022-3913(52)90030-9

64. Serrano JG, Lepe X, Townsend JD, Johnson GH, Thielke S. An accuracy evaluation of four removable die systems. J Prosthet Dent. 1998;80:575-580.

https://doi.org/10.1016/S0022-3913(98)70035-6

PMid:9813809

65. Finger W. Effect of the setting expansion of dental stone upon the die precision. Eur J Oral Sci. 1980;88:159-160.

https://doi.org/10.1111/j.1600-0722.1980.tb01208.x

PMid:6990467

66. Lautenschlager EP, Corbin F. Investigation on the expansion of dental stone. J Dent Res. 1969;48:206-210.

https://doi.org/10.1177/00220345690480020701

PMid:5251909

67. Winkler MM, Monaghan P, Gilbert JL, Lautenschlarger EP. Comparison of four techniques for monitoring the setting kinetics of gypsum. J Prosthet Dent. 1998;79:532-536.

https://doi.org/10.1016/S0022-3913(98)70174-X

PMid:9597606

68. Heshmati RH, Nagy WW, Wirth CG, Dhuru VB. Delayed linear expansion of improved dental stone. J Prosthet Dent. 2002;88:26-31.

https://doi.org/10.1067/mpr.2002.127653

PMid:12239476

69. Wise M. Fit of implant-supported fixed prostheses fabricated on master casts made from a dental stone and a dental plaster. J Prosthet Dent. 2001;86:532-538.

https://doi.org/10.1067/mpr.2001.119315

PMid:11725282

70. Wee AG, Schneider RL, Aquilino SA, Huff TL, Lindquist TJ, Williamson DL. Evaluation of the accuracy of solid implant casts. J Prosthod. 1998;7:161-169.

https://doi.org/10.1111/j.1532-849X.1998.tb00199.x

PMid:9807099

71. Binon PP. Implants and components: entering the new millennium. Int J Oral Maxillofac Implants. 2000;15:76-94.

PMid:10697942

72. Binon PP. Evaluation of machining accuracy and consistency of selected implants, standard abutments, and laboratory analogs. Int J Prosthodont. 1995;8:162-178.

PMid:7575968

73. Vigolo P, Fonzi F, Majzoub Z, Cordioli G. Evaluation of gold-machined UCLA-type abutments and CAD/CAM titanium abutments with hexagonal external connection and with internal connection. Int J Oral Maxillofac Implants. 2008;23:247-252.

PMid:18548920

74. Cehreli M, Duyck J, Cooman M, Puers R, Naert I. Implant design and interface force transfer. A photoelastic and strain-gaugeanalysis. Clin Oral Impl Res. 2004;15:249-257.

https://doi.org/10.1111/j.1600-0501.2004.00979.x

PMid:15008938

75. Cabral LM, Guedes CG. Comparative analysis of 4 impression techniques for implants. Implant Dent. 2007;16:187-194.

https://doi.org/10.1097/ID.0b013e3180587b3f

PMid:17563509

76. Goll GE. Production of accurately fitting full-arch implant frameworks: Part I – clinical procedures. J Prosthet Dent. 1991;66:377-384.

https://doi.org/10.1016/0022-3913(91)90266-Y

PMid:1800736

77. Burawi G, Houston F, Byrne D, Claffey N. A comparison of the dimensional accuracy of the splinted and unsplinted impression techniques for the Bone-Lock implant system. J Prosthet Dent. 1997;77:68-75.

https://doi.org/10.1016/S0022-3913(97)70209-9

PMid:9029468

78. Inturregui JA, Aquilino SA, Ryther JS, Lund PS. Evaluation of three impression techniques for osseointegrated dental implants. J Prosthet Dent. 1993;69:503-509.

https://doi.org/10.1016/0022-3913(93)90160-P

PMid:8483130

79. Vigolo P, Majzoub Z, Cordioli G. In vitro comparison of master cast accuracy for single tooth implant replacement. J Prosthet Dent. 2000;83:562-566.

https://doi.org/10.1016/S0022-3913(00)70015-1

PMid:10793389

80. Del' Acqua MA, Arioli-Filho JN, Compagnoni MA, Mollo FA Jr. Accuracy of impression and pouring techniques for an implant supported prosthesis. Int J Oral Maxillofac Implants. 2008;23:226-236.

PMid:18548918

81. Del' Acqua MA, Chavez AM, Castanharo SM, Compagnoni MA, Mollo FA Jr. The effect of splint material rigidity in implant impression techniques. Int J Oral Maxillofac Implants. 2010;25:1153-1158.

PMid:21197492

82. Moon PC, Eshleman JR, Douglas HB Jr, Garrett SG. Comparison of accuracy of soldering indices for fixed prostheses. J Prosthet Dent. 1978;40:35-38.

https://doi.org/10.1016/0022-3913(78)90155-5

PMid:28416

83. Mojon P, Oberholzer JP, Meyer JM, Belser UC. Polymerization shrinkage of index and pattern acrylic resins. J Prosthet Dent. 1990;64:684-688.

https://doi.org/10.1016/0022-3913(90)90296-O

PMid:2079675

84. Spector MR, Donovan TE, Nicholls JI. An evaluation of impression techniques for osseointegrated implants. J Prosthet Dent. 1990;63:444-447.

https://doi.org/10.1016/0022-3913(90)90235-5

PMid:2184229

85. Dumbrigue HB, Gurun DC, Javid NS. Prefabricated acrylic resin bars for splinting implant transfer copings. J Prosthet Dent. 2000;84:108-110.

https://doi.org/10.1067/mpr.2000.107914

PMid:10898848

86. Peregrina A, Land MF, Wandling C, Johnston WM. The effect of different adhesives on vinyl polysiloxane bond strength to two tray materials. J Prosthet Dent. 2005;94:209-213.

https://doi.org/10.1016/j.prosdent.2005.06.011

PMid:16126072

87. Davis GB, Moser JB, Brindsden GI. The bonding properties of elastomer tray adhesives. J Prosthet Dent. 1976;36:278-285.

https://doi.org/10.1016/0022-3913(76)90183-9

PMid:784960

88. Samman JM, Fletcher AM. A study of impression tray adhesives. Quintessence Int. 1985;16:305-309.

PMid:3892569

89. Cho GC, Donovan TE, Chee WWL, White SN. Tensile bond strength of polyvinylsiloxane impression bonded to a custom tray as a function of drying time: Part I. J Prosthet Dent. 1995;73:419-423.

https://doi.org/10.1016/S0022-3913(05)80068-X

90. Payne JA, Pereira BP. Bond strength of two nonaqueous elastomeric impression materials bonded to two thermoplastic resin tray materials. J Prosthet Dent. 1995;74:563-568.

https://doi.org/10.1016/S0022-3913(05)80306-3

PMid:8778378

91. Petropoulos VC, Weintraub A, Weintraub GS. Predoctoral fixed prosthodontics curriculum survey. J Prosthodont. 1998;7:183-191.

https://doi.org/10.1111/j.1532-849X.1998.tb00202.x

PMid:9807102

92. Chee WW, Donovan TE. Polyvinyl siloxane impression materials: a review of properties and techniques. J Prosthet Dent. 1992;68:728-732.

https://doi.org/10.1016/0022-3913(92)90192-D

PMid:1432791

93. Lorenzoni M, Pertl C, Penker K, Polansky S, Sedaj B, Wegschneider WA. Comparison of the transfer precision of three different impression materials in combination with transfer caps for Frialit-2 system. J Oral Rehab. 2000;27:629-638.

https://doi.org/10.1046/j.1365-2842.2000.00594.x

PMid:10931257

94. Eames WB, Wallace SW, Suway NB, Rogers LB. Accuracy and dimensional stability of elastomeric impression materials. J Prosthet Dent. 1979;42:159-162.

https://doi.org/10.1016/0022-3913(79)90166-5

PMid:379317

95. Boulton JL, Gage JP, Vincent PF, Basford KE. A laboratory study of dimensional changes for three elastomeric impression materials using custom and stock trays. Austr Dent J. 1996;41:398-404.

https://doi.org/10.1111/j.1834-7819.1996.tb06026.x

PMid:9008997

96. Wee AG. Comparison of impression materials for direct multi-implant impressions. J Prosthet Dent. 2000;83:323-331.

https://doi.org/10.1016/S0022-3913(00)70136-3

PMid:10709042

97. McDonnel T, Houston F, Byrne D, Gorman C, Claffey N. The effect of time lapse on the accuracy of two acrylic resins used to assemble an implant framework for soldering. J Prosthet Den. 2004;91:538-540.

https://doi.org/10.1016/S0022-3913(02)52728-1

PMid:15211295

98. Garine WN, Funkenbusch PD, Ercoli C, Wodenscheck J, Murphy WC. Measurement of the rotational misfit and implant-abutment gap of all-ceramic abutments. In J Oral maxillofac Implants. 2007;22:928-938.

PMid:18271374

99. Oyagüe RC, Turrion AS, Toledano M, Monticelli F, Osorio R. In vitro vertical misfit evaluation of cast frameworks for cement-retained implant-supported prostheses. J Dent. 2009;37:52-58.

https://doi.org/10.1016/j.jdent.2008.09.007

PMid:18951675