|
1. Buonocore
MG. A simple method of increasing the adhesion of acrylic filling materials
to the enamel surfaces. J Dent Res. 1955;34:849-53.
https://doi.org/10.1177/00220345550340060801
PMid:13271655
|
|
|
|
2. Sonis
AL. Air abrasion of failed bonded metal brackets: a study of shear bond
strength and surface characteristics as determined by scanning electron
microscopy. Am J Orthod Dentofacial
Orthop. 1996;110:96-8.
https://doi.org/10.1016/S0889-5406(96)70094-X
PMid:8686686
|
|
|
|
|
3. Cacciafesta
V, Sfondrini MF, Melsen
B, Scribante A. A 12 month clinical study of bond
failures of recycled versus new stainless steel orthodontic brackets. Eur J Orthod. 2004;26:449-54.
https://doi.org/10.1093/ejo/26.4.449
PMid:15366391
|
|
|
|
|
4. Quick AN, Harris AM,
Joseph VP. Office reconditioning of stainless steel orthodontic
attachments. Eur J Orthod.
2005;27:231-36.
https://doi.org/10.1093/ejo/cjh100
PMid:15947221
|
|
|
|
|
5. Bishara
SE, Ostby AW, Laffoon
JF, Warren J. Shear bond strength comparison of two adhesive systems
following thermocycling. A new self-etch primer
and a resin-modified glass ionomer. Angle Orthod. 2007;77:337-41.
https://doi.org/10.2319/0003-3219(2007)077[0337:SBSCOT]2.0.CO;2
PMid:17319771
|
|
|
|
|
6. Tavares SW, Consani S, Nouer DF, Magnani MB, Nouer PR, Martins
LM. Shear Bond Strength of New and Recycled Brackets to Enamel. Braz Dent J. 2006;17:44-8.
https://doi.org/10.1590/S0103-64402006000100010
PMid:16721464
|
|
|
|
|
7. Heravi
F, Naseh RA Comparative Study between Bond
Strength of Rebonded and Recycled Orthodontic
Brackets. Dental Research Journal. 2006;2:1-5.
|
|
|
|
|
8. Dawjee
S, Gheevarghese O. Recycling debonded
brackets with an acid bath. J ClinOrthod. 2004;38:605-6.
PMid:15665432
|
|
|
|
|
9. Basudan
AM, Al-EmranSE.The effects of in-office
reconditioning on the morphology of slots and bases of Stainless Steel
brackets and on the shear/peel bond strength. J Orthod.
2001;28:231-36.
https://doi.org/10.1093/ortho/28.3.231
PMid:11504901
|
|
|
|
|
10. Reynolds I R. A
review of direct orthodontic bonding. British Journal of Orthodontics. 1975;2:171-78.
https://doi.org/10.1080/0301228X.1975.11743666
|
|
|
|
|
11. Ostertag
AJ, Dhuru VB, Ferguson DJ, Meyer RA Jr. Shear, torsional and tensile bond strengths of ceramic
brackets using three adhesive filler concentrations. Am J Orthod Dentofacial
Orthop.1991;100:251-58.
https://doi.org/10.1016/0889-5406(91)70062-2
PMid:1877551
|
|
|
|
|
12. Greenlaw
R, Way DC, Galil KA. An in vitro evaluation of a
visible light-cured resin as an alternative to conventional resin bonding
systems. Am J Orthod Dentofacial
Orthop. 1989;96:214-20.
https://doi.org/10.1016/0889-5406(89)90458-7
PMid:2672781
|
|
|
|
|
13. Bishara
SE, Laffoon JF, Vonwald
L, Warren JJ. The effect of repeated bonding on the shear bond strength of
a composite resin orthodontic adhesive. Am J Orthod
Dentofacial Orthop.
2002;121:521-25.
https://doi.org/10.1067/mod.2002.123042
PMid:12045771
|
|
|
|
|
14. Mascia
VE, Chen SR. Shearing strengths of recycled direct-bonding brackets. Am J Orthod. 1982;82:211-16.
https://doi.org/10.1016/0002-9416(82)90141-5
PMid:6760720
|
|
|
|
|
15. Grabouski
JK, Staley RN, Jakobsen JR. The effect of microetching on the bond strength of metalbrackets when bonded to previously bonded teeth:
An in vitro study.Am J Orthod
Dentofacial Orthop.
1998;114:452-60.
https://doi.org/10.1016/S0889-5406(98)70192-1
PMid:9790331
|
|