|
1.
Van Landuyt KL, Snauwaert
J, De Munck J, Peumans
M, Yoshida Y, Poitevin
A, et al. Systematic review
of the chemical composition of contemporary dental adhesives. Biomaterials. 2007;
28:3757-85.
https://doi.org/10.1016/j.biomaterials.2007.04.044
PMid:17543382
|
|
|
|
2.
Nakabayashi N, Kojima K, Masuhara E. The
promotion of adhesion by the infiltration of monomers into tooth
substrates. J
Biomed Mater Res. 1982;16:265-73.
https://doi.org/10.1002/jbm.820160307
PMid:7085687
|
|
|
|
|
3. Leloup G, D'Hoore W, Bouter D, Degrange M, Vreven J. Concise Review Biomaterials &
Bioengineering: Meta-analytical Review of Factors Involved in Dentin
Adherence. J
Dent Res. 2001;80:1605-14.
https://doi.org/10.1177/00220345010800070301
PMid:11597019
|
|
|
|
|
4.
Sadat-Shojai M, Atai
M, Nodehi A, Khanlar
LN. Hydroxyapatite nanorods
as novel fillers for improving the properties of dental adhesives:
Synthesis and application. Dent Mater.
2010;26:471-82.
https://doi.org/10.1016/j.dental.2010.01.005
PMid:20153516
|
|
|
|
|
5.
Nakabayashi N, Ashizawa M, Nakamura M.
Identification of a resin-dentin hybrid layer in vital human dentin
created in vivo: durable bonding to vital dentin. Quintessence Int. 1992;23:135-41.
PMid:1322546
|
|
|
|
|
6.
Van Meerbeek B, Yoshida
Y, Snauwaert J, Hellemans
L, Lambrechts P, Vanherle
G, et al. Hybridization
effectiveness of a two-step versus a three-step smear layer removing
adhesive system examined correlatively by TEM and AFM. J Adhes Dent. 1999;1:7-23.
PMid:11725687
|
|
|
|
|
7. Kim
JS, Cho BH, Lee IB, Um CM, Lim BS, Oh MH, et al. Effect of the
hydrophilic nanofiller loading on the
mechanical properties and the microtensile
bond strength of an ethanol-based one-bottle dentin adhesive. J
Biomed Mater Res B Appl Biomater.2005;72:284-91.
https://doi.org/10.1002/jbm.b.30153
PMid:15484258
|
|
|
|
|
8. Cho
BH, Dickens SH, Bae JH, Chang CG, Son HH,
Um CM. Effect of interfacial bond quality on the direction of
polymerization shrinkage flow in resin composite restorations. Oper Dent. 2002; 27:297-304.
PMid:12022463
|
|
|
|
|
9.
Dickens SH, Cho BH. Interpretation of bond failure through conversion
and residual solvent measurements and Weibull
analyses of flexural and microtensile bond
strengths of bonding agents. Dent Mater.
2005;21:354-64.
https://doi.org/10.1016/j.dental.2004.05.007
PMid:15766582
|
|
|
|
|
10. Solhi L, Atai M, Nodehi A, Imani M. A
novel dentin bonding system containing poly (methacrylic
acid) grafted nanoclay: synthesis,
characterization and properties. Dent Mater.
2012;28:1041-50.
https://doi.org/10.1016/j.dental.2012.06.004
PMid:22795491
|
|
|
|
|
11. Solhi L, Atai M, Nodehi A, Imani M, Ghaemi A, Khosravi K.
Poly (acrylic acid) grafted montmorillonite
as novel fillers for dental adhesives: synthesis, characterization
and properties of the adhesive. Dent Mater.
2012;28:369-77.
https://doi.org/10.1016/j.dental.2011.11.010
PMid:22169675
|
|
|
|
|
12. Atai M, Solhi L, Nodehi A, Mirabedini
SM, Kasraei S, Akbari
K, et al. PMMA-grafted nanoclay as novel
filler for dental adhesives. Dent Mater. 2009;25:339-47.
https://doi.org/10.1016/j.dental.2008.08.005
PMid:18829096
|
|
|
|
|
13. Nunes MF, Swift EJ, Perdigão
J. Effects of adhesive composition on microtensile
bond strength to human dentin. Am J Dent.
2001;14:340-3.
PMid:11949791
|
|
|
|
|
14.
Franchini E, Galy
J, Gérard JF. Sepiolite-based epoxy nanocomposites:
relation between processing, rheology, and
morphology. J Colloid Interface Sci. 2009;329:38-47.
https://doi.org/10.1016/j.jcis.2008.09.020
PMid:18848336
|
|
|
|
|
15. Tartaglione G, Tabuani
D, Camino G, Moisio M. PP and PBT
composites filled with sepiolite:
morphology and thermal behaviour. Composites science and technology.
2008;68:451-60.
https://doi.org/10.1016/j.compscitech.2007.06.023
|
|
|
|
|
16.
Hashimoto M, Ohno H, Kaga
M, Endo K, Sano H, Oguchi H. In vivo
degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res. 2000;79:1385-91.
https://doi.org/10.1177/00220345000790060601
PMid:10890717
|
|
|
|
|
17. Wahab FK, Shaini FJ, Morgano SM. The effect of thermocycling
on microleakage of several commercially
available composite Class V restorations in vitro. J Prosthet Dent. 2003;90:168-74.
https://doi.org/10.1016/S0022-3913(03)00300-7
PMid:12886210
|
|
|
|
|
18.
Can Say E, Nakajima M, Senawongse P, Soyman M, Ozer F, Ogata
M, et al. Microtensile bond strength of a
filled vs unfilled adhesive to dentin using
self-etch and total-etch technique. J Dent. 2006;34:283-91.
https://doi.org/10.1016/j.jdent.2005.07.003
PMid:16214284
|
|
|
|
|
19. Kasraei S, Atai M, Khamverdi Z, Nejad SK.
The effect of nanofiller addition to an
experimental dentin adhesive on microtensile
bond strength to human dentin. Journal of Dentistry of Tehran University of Medical Sciences. 2009;6:36-41.
|
|
|
|
|
20. Lohbauer U, Wagner A, Belli R, Stoetzel C, Hilpert A,
Kurland HD, et al. Zirconia nanoparticles prepared by laser vaporization as
fillers for dental adhesives. Acta Biomater. 2010;6:4539-46.
https://doi.org/10.1016/j.actbio.2010.07.002
PMid:20624492
|
|
|
|
|
21.
Miyazaki M, Ando S, Hinoura K, Onose H, Moore BK. Influence of filler addition
to bonding agents on shear bond strength to bovine dentin. Dent Mater.
1995;11:234-8.
https://doi.org/10.1016/0109-5641(95)80055-7
|
|
|
|
|
22. Moszner N, Salz U,
Zimmermann J. Chemical aspects of self-etching enamel-dentin
adhesives: a systematic review. Dent Mater.
2005;21:895-910.
https://doi.org/10.1016/j.dental.2005.05.001
PMid:16038969
|
|
|
|
|
23.
Gallo JR, Comeaux R, Haines B, Xu X, Burgess JO. Shear bond strength of four
filled dentin bonding systems. Oper Dent. 2001;26:44-7.
PMid:11203776
|
|
|
|
|
24. Frankenberger R, Perdigão
J, Rosa BT, Lopes M. "No-bottle" vs
"multi-bottle" dentin adhesives--a microtensile
bond strength and morphological study. Dent Mater.
2001;17:373-80.
https://doi.org/10.1016/S0109-5641(00)00084-1
PMid:11445203
|
|
|
|
|
25.
Tam LE, Khoshand S, Pilliar
RM. Fracture resistance of dentin-composite interfaces using
different adhesive resin layers. J Dent. 2001;29:217-25.
https://doi.org/10.1016/S0300-5712(01)00004-5
PMid:11306164
|
|