Moharam LM, Salem HN, Elgamily HM. The effect of incorporating different concentrations of chlorhexidine digluconate on the degree of conversion of an experimental adhesive resin. J Clin Exp Dent. 2018;10(4):e371-7.

doi:10.4317/jced.54391

http://dx.doi.org/doi:10.4317/jced.54391

References

1. Bouillaguet S, Gysi P, Wataha J, Ciucchi B, Cattani M, Godin C, et al. Bond strength of composite to dentin using conventional, one˗step, and self˗etching adhesive systems. J Dent. 2001;29:55˗61.

PMid:1137639

2. Miyazaki M, Onose H, Iieda N, Kazama H. Determination of residual double bonds in resin˗dentin interface by Raman spectroscopy. Dent Mater. 2003;19:245˗51.

PMid:12628438

3. Tay FR, Pashly DH. Aggressiveness of contemporary self˗etching systems. I: Depth of penetration beyond dentin smear layer. Dent Mater. 2001;17:296˗308.

PMid:11356206

4. Carrilho MR, Carvalho RM, De Goes MF, Di Hipólito V, Geraldeli S, Tay FR, et al. Chlorhexidine preserves dentin bond in vitro. J Dent Res. 2007;86:90˗4.

PMid:17189470 PMCid:PMC2248723

5. Zhang S, Kern M. The Role of Host-derived Dentinal Matrix Metalloproteinases in Reducing Dentin Bonding of Resin Adhesives. Int J Oral Sci. 2009;1:163˗76.

PMid:20690420 PMCid:PMC3470104

6. Türkün M, Cal E, Toman M, Toksavul S. Effects of dentin disinfectants on the shear bond strength of all˗ceramics to dentin. Oper Dent. 2005;30:453˗60.

PMid:16130865

7. Say EC, Koray F, Tarim B, Soyman M, Gulmez T. In vitro effect of cavity disinfectants on the bond strength of dentin bonding systems. Quintessence Inl. 2004;35:56˗60.

PMid:14765642

8. Stanislawczuk R, Reis A, Loguercio AD. A 2-year in vitro evaluation of a chlorhexidine-containing acid on the durability of resin–dentin interfaces. J Dent. 2011;39:40˗7.

PMid:20937350

9. Zhou J, Tan J, Chen L, Li D, Tan Y. The incorporation of Chlorhexidine in a two-step self-etching adhesive preserves dentin bond in vitro. J Dent. 2009;37:807˗12.

PMid:19615807

10. Conde MC, Zanchi CH, Rodrigues Jr SA, Carren NLV, Ogliari FA, Piva E. Nanofiller loading level: Influence on selected properties of an adhesive resin. J Dent. 2009;37:331˗5.
PMid:19203819

11. Gregoire GL, Akon BA, Millas A. Interfacial micro˗morphological differences in hybrid layer formation between water- and solvent-based dentin bonding systems. J Prosth Dent. 2002;87:633˗41.

12. Atai M, Pahlavan A, Moin N. Nano˗porous thermally sintered nano silica as novel fillers for dental composites. Dent Mater. 2012;28:133˗45.

PMid:22137937

13. Van Landuyt KL, Snauwaert J, De Munck J, Peumans M, Yoshida Y, Poitevin A. Systematic review of the chemical composition of contemporary dental adhesives. Biomater. 2007;28:3757˗85.

PMid:17543382

14. Yoshida K, Greener E. Effects of two amine reducing agents on the degree of conversion and physical properties of an unfilled light-cured resin. Dent Mater. 1993;9:246˗51.

PMid:7988756

15. Arrais C, Pontes F, Dos Santos L, Leite E, Giannini M. Degree of conversion of adhesive systems light˗cured by LED and Halogen light. Braz Dent J. 2007;18:54˗9.

PMid:17639202

16. Matinlinna JP, Lassila LV, Vallittu PK. Evaluation of five dental silanes on bonding a luting cement onto silica-coated titanium. J Dent. 2006;34:721˗6.
PMid:16513239

17. Da Silva EM, Glir DH, Gill AW, Giovanini AF, Furuse AY, Gonzaga CC. Effect of chlorhexidine on dentin bond strength of two adhesive systems after storage in different media. Braz Dent J. 2015;26:642˗7.

PMid:26963210

18. De Munck J, Van Den Steen PE, Mine A, Van Landuyt KL, Poitevin A, Opdenakker G, et al. Inhibition of enzymatic degradation of adhesive–dentin interfaces. J Dent Res. 2009;88:1101˗6.

PMid:19861692

19. Cadenaro M, Pashley DH, Marchesi G, Carrilho MD, Antoniolli F, Mazzoni A, et al. Influence of Chlorhexidine on the degree of conversion and E-modulus of experimental adhesive blends. Dent Mater. 2009;25:1269˗74.

20. Collares FM, Leitune VCB, Portella FF, Ogliari FA, Samuel SMW. Long-term bond strength, degree of conversion and resistance to degradation of a HEMA˗free model adhesive. Braz J Oral Sci. 2014;13:261˗5.

21. De Munck J, Van Meerbeek B, Yoshida Y, Inoue S, Vargas M, Suzuki K, et al. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res. 2003;82:136˗40.

PMid:12562888

22. Barszczewska-Rybarek I, Gibas M, Kurkok M. Evaluation of the network parameter in aliphatic poly-urethane dimethacrylates by dynamic thermal analysis. Polymer. 2000;41:3129˗35.

23. Halvorson RH, Erickson RL, Davidson CL. Energy dependent polymerization of resin˗based composite. Dent Mater. 2002;18:463-9.
https://doi.org/10.1016/S0109-5641(01)00069-0

PMid:12098575

24. Riggs PD, Braden M, Patel M. Chlorhexidine release from room temperature polymerizing methacrylate systems. Biomater. 2000;21:345˗51.

PMid:10656315

25. Gong K, Braden M, Patel MP, Rehman IU, Zhang Z, Darr JA. Controlled release of chlorhexidine diacetate from a porous methacrylate system: Supercritical fluid assisted foaming and impregnation. J Pharm Sci. 2007;96:2048˗56.

PMid:17301965