Camós-Tena R, Escuin-Henar T, Torné-Duran S. Conical connection adjustment in prosthetic abutments obtained by different techniques. J Clin Exp Dent. 2019;11(5):e408-13.

 

doi:10.4317/jced.55592

http://dx.doi.org/10.4317/jced.55592

____________________________________________________________________________________________________________________

 

References

1. Mahmoud M, Binti N. Passive fit in screw retained multi-unit implant prosthesis understanding and achieving: a review of the literature. J Indian Prosthodont Soc. 2014;14:16-23.
https://doi.org/10.1007/s13191-013-0343-x
PMid:24604993 PMCid:PMC3935037

 

2. Presotto AG, Bhering CL, Mesquita MF, Barao VA. Marginal fit and photoelastic stress analysis of CAD-CAM and overcast 3-unit implant-supported frameworks. J Prosthet Dent. 2017;117:373-37.
https://doi.org/10.1016/j.prosdent.2016.06.011
PMid:27666497

 

3. Katsoulis J, Takeichi T, Gaviria AS, Peter L, Katsoulis K. Misfit of implant prostheses and its impact on clinical outcomes. Definition, assessment and systematic review of the literature. Eur J Oral Implantol. 2017;10:121-38.

 

4. Moraes LM, Rossetti PH, Rosseti LM, Pedreira AP, Valle A, Bonachela W. Marginal fit cylinder-abutment interface before and after overcasting procedure. J Appl Oral Sci. 2005;13:366-71.
https://doi.org/10.1590/S1678-77572005000400010
PMid:20865221

 

5. Liu Y, Wang J. Influences of microgap and micro motion of implant-abutment interface on marginal bone loss around implant neck. Arch Oral Biol. 2017;83:153-60.
https://doi.org/10.1016/j.archoralbio.2017.07.022

 

6. Lemos CAA, Verri FR, Bonfante EA, Santiago Júnior JF, Pellizzer EP. Comparision of external and internal implant-abutment connections for implant supported prostheses. A systematic review and meta-analysis. J Dent. 2018;70:14-22.
https://doi.org/10.1016/j.jdent.2017.12.001
PMid:29221955

 

7. Sadowsky SJ, Caputo AA. Effect of anchorage systems and extension base contact on load transfer with mandibular implants-retained overdentures. J Prostate Dent. 2000;84:327-34.
https://doi.org/10.1067/mpr.2000.109378
PMid:11005906

 

8. Karl M, Irastorza-Landa A. In vitro characterization of original and nonoriginal implant abutments. Int J Oral Maxillofac Implants. 2018;33:1229-1239.
https://doi.org/10.11607/jomi.6921
PMid:30427953

 

9. Nogueira M, Cruz D, Sesma N, Ferrari G, Luiz A. Photoelastic stress analysis in mandibular bone surrounding bar-clip overdenture implants. Braz Oral Res. 2014;28. pii: S1806-83242013005000034.

PMID:24878673

 

10. Hobkirk J, Havthoulas T. The influence of mandibular deformation, implant numbers, and loading position on detected forces in abutments supporting fixed implant superstructures. J Prosthet Dent. 1998;80:169-74.
https://doi.org/10.1016/S0022-3913(98)70106-4

 

11. Zipprich H, Weigl P, Ratka C, Lange B, Lauer HC. The micromechanical behavior of implant-abutment connections under a dynamic load protocol. Clin Implant Dent Relat Res. 2018;20:814-23.
https://doi.org/10.1111/cid.12651
PMid:30039915

 

12. Najeeb S, Zafar MS, Khurshid Z, Siddiqui F. Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics. J Prosthodon Res. 2016;60:12-19.
https://doi.org/10.1016/j.jpor.2015.10.001

PMIid:26520679