Shafiei F, Kamran S, Memarpour M, Aghaei T. Bond strength and adhesive interfacial micromorphology of self-adhesive resin cements: Effect of reduced times of pre-etching. J Clin Exp Dent. 2019;11(11):e984-90.

 

doi:10.4317/jced.56120

http://dx.doi.org/10.4317/jced.56120

__________________________________________________________________________________________________________________________

 

References

1. Radovic I, Monticelli F, Goracci C, Vulicevic ZR, Ferrari M. Self-adhesive resin cements: a literature review. J Adhes Dent. 2008;10:251-258.

PMid:18792695

 

2. Aguiar TR, André CB, Correr-Sobrinho L, Arrais CA, Ambrosano GM, Giannini M. Effect of storage times and mechanical load cycling on dentin bond strength of conventional and self-adhesive resin luting cements. J Prosthet Dent. 2014;111:404-10.
https://doi.org/10.1016/j.prosdent.2013.07.016
PMid:24355507

 

3. Hikita K, Van Meerbeek B, De Munck J, Ikeda T, Van Landuyt K, Maida T, et al. Bonding effectiveness of adhesive luting agents to enamel and dentin. Dent Mater. 2007;23:71-80.
https://doi.org/10.1016/j.dental.2005.12.002
PMid:16426673

 

4. Viotti RG, Kasaz A, Pena CE, Alexandre RS, Arrais CA, Reis AF. Microtensile bond strength of new self-adhesive luting agents and conventional multistep systems. J Prosthet Dent. 2009;102:306-12.
https://doi.org/10.1016/S0022-3913(09)60180-3

PMid:19853172

 

5. Burke FT, Crisp RJ, Richter B. A practice-based evaluation of the handling of a new self-adhesive universal resin luting material. Inter Dent J. 2006; 56:142-6.
https://doi.org/10.1111/j.1875-595X.2006.tb00086.x

PMid:16826880

 

6. Rodrigues RF, Ramos CM, Francisconi PA, Borges AFS. The shear bond strength of self-adhesive resin cements to dentin and enamel: an in vitro study. J Prosthet Dent. 2015;113:220-7.
https://doi.org/10.1016/j.prosdent.2014.08.008
PMid:25444282

 

7. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater. 2004;20:963-71.
https://doi.org/10.1016/j.dental.2004.03.002
PMid:15501325

 

8. Monticelli F, Osorio R, Mazzitelli C, Ferrari M, Toledano M. Limited decalcification/diffusion of self-adhesive cements into dentin. J Dent Res. 2008;87:974-9.
https://doi.org/10.1177/154405910808701012
PMid:18809754

 

9. Lührs A-K, Guhr S, Günay H, Geurtsen W. Shear bond strength of self-adhesive resins compared to resin cements with etch and rinse adhesives to enamel and dentin in vitro. Clin Oral investing. 2010;14:193-9.
https://doi.org/10.1007/s00784-009-0279-z
PMid:19430821

 

10. Shafiei F, Memarpour M, Jowkar Z. Marginal sealing of a porcelain laminate veneer luted with three different resin cements on fluorosed teeth. Int J Esthet Dent. 2016:79:60-71.

PMid:28117855

 

11. Barkmeier W, Erickson R. Shear bond strength of composite to enamel and dentin using Scotchbond multi-purpose. Am J Dent. 1994;7:175-179.

PMid:7993609

 

12. Lin J, Shinya A, Gomi H, Shinya A. Bonding of self-adhesive resin cements to enamel using different surface treatments: bond strength and etching pattern evaluations. Dent Mater J. 2010;29:425-32.
https://doi.org/10.4012/dmj.2009-140
PMid:20668359

 

13. Duarte S, Botta AC, Meire M, Sadan A. Microtensile bond strengths and scanning electron microscopic evaluation of self-adhesive and self-etch resin cements to intact and etched enamel. J Prosthet Dent. 2008;100:203-10.
https://doi.org/10.1016/S0022-3913(08)60179-1

PMid:18762032

 

14. Pisani-Proença J, Erhardt MCG, Amaral R, Valandro LF, Bottino MA, Del Castillo-Salmerón R. Influence of different surface conditioning protocols on microtensile bond strength of self-adhesive resin cements to dentin. J Prosthet Dent. 2011; 105:227-35.
https://doi.org/10.1016/S0022-3913(11)60037-1

PMid:21458647

 

15. Tsujimoto A, Barkmeier W, Takamizawa T, Latta M, Miyazaki M. The effect of phosphoric acid pre-etching times on bonding performance and surface free energy with single-step self-etch adhesives. Oper Dent. 2016;41:441-9.
https://doi.org/10.2341/15-221-L
PMid:27054410

 

16. Takamizawa T, Barkmeier WW, Tsujimoto A, Suzuki T, Scheidel DD, Erickson RL, et al. Influence of different pre-etching times on fatigue strength of self-etch adhesives to dentin. Eur J Oral Sci. 2016;124:210-8.
https://doi.org/10.1111/eos.12253
PMid:26918658

 

17. Shafiei F, Memarpour M. Effect of repeated use on dentin bond strength of tow adhesive systems: All-in-one and one-bottle. Indian J Dent Res. 2009;20:180-4.
https://doi.org/10.4103/0970-9290.52897
PMid:19553719

 

18. Tsujimoto A, Iwasa M, Shimamura Y, Murayama R, Takamizawa T, Miyazaki M. Enamel bonding of single-step self-etch adhesives: influence of surface energy characteristics. J Dent. 2010;38:123-130.
https://doi.org/10.1016/j.jdent.2009.09.011
PMid:19822183

 

19. Ferracane JL, Stansbury J, Burke FJT. Self-adhesive resin cements-chemistry, properties and clinical considerations. J Oral Rehabil. 2011;38:295-314.
https://doi.org/10.1111/j.1365-2842.2010.02148.x
PMid:21133983

 

20. Gerth HU, Dammaschke T, Züchner H, Schäfer E. Chemical analysis and bonding reaction of RelyX Unicem and Bifix composites-a comparative study. Dent Mater. 2006;22:934-941.
https://doi.org/10.1016/j.dental.2005.10.004
PMid:16364427

 

21. Barkmeier WW, Erickson RL, Kimmes NS, Latta MA, Wilwerding TM. Effect of enamel etching time on roughness and bond strength. Oper Dent. 2009;34:217-22.
https://doi.org/10.2341/08-72
PMid:19363978

 

22. Tsujimoto A, Barkmeier WW, Takamizawa T, Watanabe H, Johnson WW, Latta MA, et al. Influence of duration of phosphoric acid pre-etching on bond durability of universal adhesives and surface free-energy characteristics of enamel. Eur J Oral Sci. 2016;124:377-86.
https://doi.org/10.1111/eos.12284
PMid:27315775

 

23. Zhang Z, Wang X, Zhang L, Liang B, Tang T, Fu B, et al. The contribution of chemical bonding to the short-and long-term enamel bond strengths. Dent Mater. 2013;29:e103-e12.
https://doi.org/10.1016/j.dental.2013.04.009
PMid:23726360

 

24. Yoshida Y, Nagakane K, Fukuda R, Nakayama Y, Okazaki M, Shintani H, et al. Comparative study on adhesive performance of functional monomers. J Dent Res. 2004;83:454-8.
https://doi.org/10.1177/154405910408300604
PMid:15153451

 

25. Mazzitelli C, Monticelli F, Toledano M, Ferrari M, Osorio R. Dentin treatment effects on the bonding performance of self-adhesive resin cements. Eur J Oral Sci. 2010;118:80-6.
https://doi.org/10.1111/j.1600-0722.2009.00703.x
PMid:20156269

 

26. Vaz RR, Hipólito VD, D'alpino PHP, Goes MFd. Bond strength and interfacial micromorphology of etch-and-rinse and self-adhesive resin cements to dentin. J Prosthodont. 2012;21:101-11.
https://doi.org/10.1111/j.1532-849X.2011.00794.x
PMid:22044733

 

27. Goracci C, Cury AH, Cantoro A, Papacchini F, Tay FR, Ferrari M. Microtensile bond strength and interfacial properties of self-etching and self-adhesive resin cements used to lute composite onlays under different seating forces. J Adhes Dent. 2006;8:327-35.

PMid:17080881

 

28. Mak YF, Lai SC, Cheung GS, Chan AW, Tay FR, Pashley DH. Micro-tensile bond testing of resin cements to dentin and an indirect resin composite. Dent Mater. 2002;18:609-21.
https://doi.org/10.1016/S0109-5641(02)00005-2

PMid:12385903