Schmidt A, Billig JW, Schlenz MA, Wöstmann B. A new 3D-method to assess
the inter implant dimensions in patients – A pilot study. J Clin Exp
Dent. 2020;12(2):e187-92.
doi:10.4317/jced.56557
https://doi.org/10.4317/jced.56557
__________________________________________
References
|
1.
Patzelt SB, Bahat O, Reynolds MA, Strub JR. The all-on-four treatment
concept: a systematic review. Clin Implant Dent Relat Res. 2014;16:836-55. |
|
|
|
|
|
2.
Abduo J, Bennani V, Waddell N, Lyons K, Swain M. Assessing the fit of implant
fixed prostheses: a critical review. Int J Oral Maxillofac Implants.
2010;25:506-15. PMid:
20556249 |
|
|
|
|
|
3.
Katsoulis J, Takeichi T, Sol Gaviria A, Peter L, Katsoulis K. Misfit of
implant prostheses and its impact on clinical outcomes. Definition,
assessment and a systematic review of the literature. Eur J Oral Implantol.
2017;10 Suppl 1:121-38. PMid:
28944373 |
|
|
|
|
|
4.
Basaki K, Alkumru H, De Souza G, Finer Y. Accuracy of Digital vs Conventional
Implant Impression Approach: A Three-Dimensional Comparative In Vitro
Analysis. Int J Oral Maxillofac Implants. 2017;32:792-9. |
|
|
|
|
|
5.
Malik J, Rodriguez J, Weisbloom M, Petridis H. Comparison of Accuracy Between
a Conventional and Two Digital Intraoral Impression Techniques. Int J
Prosthodont. 2018;31:107-13. |
|
|
|
|
|
6.
Rech-Ortega C, Fernandez-Estevan L, Sola-Ruiz MF, Agustin-Panadero R,
Labaig-Rueda C. Comparative in vitro study of the accuracy of impression
techniques for dental implants: Direct technique with an elastomeric
impression material versus intraoral scanner. Med Oral Patol Oral Cir Bucal.
2019;24:e89-e95. |
|
|
|
|
|
7.
Andriessen FS, Rijkens DR, van der Meer WJ, Wismeijer DW. Applicability and
accuracy of an intraoral scanner for scanning multiple implants in edentulous
mandibles: a pilot study. J Prosthet Dent. 2014;111:186-94. |
|
|
|
|
|
8.
Alsharbaty MHM, Alikhasi M, Zarrati S, Shamshiri AR. A Clinical Comparative
Study of 3-Dimensional Accuracy between Digital and Conventional Implant
Impression Techniques. J Prosthodont. 2019;28:e902-e8. |
|
|
|
|
|
9.
Balkenhol M, Haunschild S, Erbe C, Wostmann B. Influence of prolonged setting
time on permanent deformation of elastomeric impression materials. J Prosthet
Dent. 2010;103:288-94. PMid:
20416412 |
|
|
|
|
|
10.
Martins F, Branco P, Reis J, Barbero Navarro I, Mauricio P. Dimensional
stability of two impression materials after a 6-month storage period. Acta
Biomater Odontol Scand. 2017;3:84-91. |
|
|
|
|
|
11.
Schmidt A, Billig JW, Schlenz MA, Rehmann P, Wostmann B. Influence of the
Accuracy of Intraoral Scanbodies on Implant Position: Differences in
Manufacturing Tolerances. Int J Prosthodont. 2019;32:430-2. |
|
|
|
|
|
12.
Kim SR, Kim CM, Jeong ID, Kim WC, Kim HY, Kim JH. Evaluation of accuracy and
repeatability using CBCT and a dental scanner by means of 3D software. Int J
Comput Dent. 2017;20:65-73. PMid:
28294206 |
|
|
|
|
|
13.
Gimenez B, Ozcan M, Martinez-Rus F, Pradies G. Accuracy of a digital
impression system based on parallel confocal laser technology for implants
with consideration of operator experience and implant angulation and depth.
Int J Oral Maxillofac Implants. 2014;29:853-62. |
|
|
|
|
|
14.
Ender A, Attin T, Mehl A. In vivo precision of conventional and digital
methods of obtaining complete-arch dental impressions. J Prosthet Dent.
2016;115:313-20. |
|
|
|
|
|
15.
Renne W, Ludlow M, Fryml J, Schurch Z, Mennito A, Kessler R, et al.
Evaluation of the accuracy of 7 digital scanners: An in vitro analysis based
on 3-dimensional comparisons. J Prosthet Dent. 2017;118:36-42. |
|
|
|
|
|
16.
Menini M, Setti P, Pera F, Pera P, Pesce P. Accuracy of multi-unit implant
impression: traditional techniques versus a digital procedure. Clin Oral
Investig. 2018;22:1253-62. |
|
|
|
|
|
17.
Müller P, Ender A, Joda T, Katsoulis J. Impact of digital intraoral scan
strategies on the impression accuracy using the TRIOS Pod scanner.
Quintessence Int. 2016;47:343-9. PMid:
26824085 |
|
|
|
|
|
18.
Moura RV, Kojima AN, Saraceni CHC, Bassolli L, Balducci I, Ozcan M, et al.
Evaluation of the Accuracy of Conventional and Digital Impression Techniques
for Implant Restorations. J Prosthodont. 2019;28:e530-e5. |
|
|
|
|
|
19.
Mutwalli H, Braian M, Mahmood D, Larsson C. Trueness and Precision of
Three-Dimensional Digitizing Intraoral Devices. Int J Dent.
2018;2018:5189761. |
|
|
|
|
|
20.
Hamalian TA, Nasr E, Chidiac JJ. Impression materials in fixed
prosthodontics: influence of choice on clinical procedure. J Prosthodont.
2011;20:153-60. |
|
|
|
|
|
21.
Alikhasi M, Siadat H, Nasirpour A, Hasanzade M. Three-Dimensional Accuracy of
Digital Impression versus Conventional Method: Effect of Implant Angulation
and Connection Type. Int J Dent. 2018;2018:3761750. |
|
|
|
|
|
22.
Ribeiro P, Herrero-Climent M, Diaz-Castro C, Rios-Santos JV, Padros R, Mur
JG, et al. Accuracy of Implant Casts Generated with Conventional and Digital
Impressions-An In Vitro Study. Int J Environ Res Public Health. 2018;15.pii:
E1599 |
|
|
|
|
|
23.
Kim KR, Seo KY, Kim S. Conventional open-tray impression versus intraoral
digital scan for implant-level complete-arch impression. J Prosthet Dent. 2019;122:543-549. |
|
|
|
|
|
24.
Ozan O, Hamis O. Accuracy of different definitive impression techniques with
the all-on-4 protocol. J Prosthet Dent. 2019;121:941-948. |
|
|
|
|
|
25.
Schmidt A, Haussling T, Rehmann P, Schaaf H, Wostmann B. Accuracy of various
impression materials and methods for two implant systems: An effect size
study. J Prosthodont Res. 2018;62:245-51. |
|
|
|
|
|
26.
Fukazawa S, Odaira C, Kondo H. Investigation of accuracy and reproducibility
of abutment position by intraoral scanners. J Prosthodont Res. 2017;61:450-9. |
|
|
|
|
|
27.
Kuhr F, Schmidt A, Rehmann P, Wostmann B. A new method for assessing the
accuracy of full arch impressions in patients. J Dent. 2016;55:68-74. |
|
|
|
|
|
28.
Sorrentino R, Gherlone EF, Calesini G, Zarone F. Effect of implant
angulation, connection length, and impression material on the dimensional
accuracy of implant impressions: an in vitro comparative study. Clin Implant
Dent Relat Res. 2010;12 Suppl 1:e63-76. |
|
|
|
|
|
29.
Arcuri L, Pozzi A, Lio F, Rompen E, Zechner W, Nardi A. Influence of implant
scanbody material, position and operator on the accuracy of digital
impression for complete-arch: A randomized in vitro trial. J Prosthodont Res.
2019.pii: S1883-1958(19)30049-0. |
|
|
|
|
|
30.
Vojdani M, Torabi K, Ansarifard E. Accuracy of different impression materials
in parallel and nonparallel implants. Dent Res J (Isfahan). 2015;12:315-22. |
|