Liporoni PCS,
Ponce ACR, de Freitas MR, Zanatta RF, Pereira MCS, Catelan A. Influence of
thickness and translucency of lithium disilicate ceramic on degree of
conversion of resinous materials. J Clin Exp Dent. 2020;12(8):e745-8.
doi:10.4317/jced.56921
https://doi.org/10.4317/jced.56921
________________________
References
|
1.
Cho SH, Lopez A, Berzins DW, Prasad S, Ahn KW. Effect of different
thicknesses of pressable ceramic veneers on polymerization of light-cured and
dual-cured resin cements. J Contemp Dent Pract. 2015;16:347-52. |
|
|
|
|
|
2.
Ural Ç, Duran İ, Tatar N, Öztürk Ö, Kaya İ, Kavut İ. The effect of amine-free
initiator system and the polymerization type on color stability of resin
cements. J Oral Sci. 2016;58:157-61. |
|
|
|
|
|
3.
Calgaro PA, Furuse AY, Correr GM, Ornaghi BP, Gonzaga CC, Influence of the
interposition of ceramic spacers on the degree of conversion and the hardness
of resin cements. Braz Oral Res. 2013;27:403-9. |
|
|
|
|
|
4.
Novais VR, Raposo LH, Miranda RR, Lopes CC, Simamoto Júnior PC, Soares CJ.
Degree of conversion and bond strength of resin-cements to feldspathic
ceramic using different curing modes. J Appl Oral Sci. 2017;25:61-8. |
|
|
|
|
|
5.
Lopes CC, Rodrigues RB, Silva AL, Simamoto Júnior PC, Soares CJ, Novais VR.
Degree of conversion and mechanical properties of resin cements cured through
different all-ceramic systems. Braz Dent J. 2015;26:484-9. |
|
|
|
|
|
6.
Scotti N, Comba A, Cadenaro M, Fontanive L, Breschi L, Monaco C, et al.
Effect of lithium disilicate veneers of different thickness on the degree of
conversion and microhardness of a light-curing and a dual-curing cement. Int
J Prosthodont. 2016;29:384-8. |
|
|
|
|
|
7.
Shafiei F, Kamran S, Memarpour M, Aghaei T. Bond strength and adhesive
interfacial micromorphology of self-adhesive resin cements: Effect of reduced
times of pre-etching. J Clin Exp Dent. 2019;11:e984-90. |
|
|
|
|
|
8.
Tomaselli LO, Oliveira DCRS, Favarão J, Silva AFD, Pires-de-Souza FCP,
Geraldeli S, et al. Influence of pre-heating regular resin composites and
flowable composites on luting ceramic veneers with different thicknesses.
Braz Dent J. 2019;30:459-66. |
|
|
|
|
|
9.
Kilinc E, Antonson SA, Hardigan PC, Kesercioglu A. The effect of ceramic
restoration shade and thickness on the polymerization of light- and dual-cure
resin cements. Oper Dent. 2011;36:661-9. |
|
|
|
|
|
10.
Giráldez I, Ceballos L, Garrido MA, Rodríguez J. Early hardness of
self-adhesive resin cements cured under indirect resin composite
restorations. J Esthet Restor Dent. 2011;23:116-24. |
|
|
|
|
|
11.
Meng X, Yoshida K, Atsuta M. Influence of ceramic thickness on mechanical
properties and polymer structure of dual-cured resin luting agents. Dent
Mater. 2008;24:594-9. |
|
|
|
|
|
12.
De Souza G, Braga RR, Cesar PF, Lopes GC. Correlation between clinical
performance and degree of conversion of resin cements: a literature review. J
Appl Oral Sci. 2015;23:358-68. |
|
|
|
|
|
13.
Archegas LR, de Menezes Caldas DB, Rached RN, Soares P, Souza EM. Effect of
ceramic veneer opacity and exposure time on the polymerization efficiency of
resin cements. Oper Dent. 2012;37:281-9. |
|
|
|
|
|
14.
Leal CL, Queiroz A, Foxton RM, Argolo S, Mathias P, Cavalcanti AN. Water
sorption and solubility of luting agents used under ceramic laminates with
different degrees of translucency. Oper Dent. 2016;41:E141-8. |
|
|
|
|
|
15.
Passos SP, Kimpara ET, Bottino MA, Rizkalla AS, Santos GC Jr. Effect of
ceramic thickness and shade on mechanical properties of a resin luting agent.
J Prosthodont. 2014;23:462-6. |
|
|
|
|
|
16.
Jang Y, Ferracane JL, Pfeifer CS, Park JW, Shin Y, Roh BD. Effect of
insufficient light exposure on polymerization kinetics of conventional and
self-adhesive dual-cure resin cements. Oper Dent. 2017;42: E1-9. |
|
|
|
|
|
17.
Runnacles P, Correr GM, Baratto Filho F, Gonzaga CC, Furuse AY. Degree of
conversion of a resin cement light-cured through ceramic veneers of different
thicknesses and types. Braz Dent J. 2014;25:38-42. |
|
|
|
|
|
18.
Shimokawa CA, Turbino ML, Harlow JE, Price HL, Price RB. Light output from
six battery operated dental curing lights. Mater Sci Eng C Mater Biol Appl.
2016;69:1036-42. |
|
|
|
|
|
19.
Jung H, Friedl KH, Hiller KA, Furch H, Bernhart S, Schmalz G. Polymerization
efficiency of different photocuring units through ceramic discs. Oper Dent.
2006;31:68-77. |
|
|
|
|
|
20.
Lima MO, Catelan A, Marchi GM, Lima DA, Martins LR, Aguiar FH. Influence of
pre-heating and ceramic thickness on physical properties of luting agents. J
Appl Biomater Funct Mater. 2018;16:252-9. |
|
|
|
|
|
21.
Soh MS, Yap AU. Influence of curing modes on crosslink density in polymer
structures. J Dent. 2004;32:321-6. |
|
|
|
|
|
22.
Dewaele M, Asmussen E, Peutzfeldt A, Munksgaard EC, Benetti AR, Finné G, et
al. Influence of curing protocol on selected properties of light-curing
polymers: degree of conversion, volume contraction, elastic modulus, and
glass transition temperature. Dent Mater. 2009;25:1576-84. |
|
|
|
|
|
23.
Daronch M, Rueggeberg FA, De Goes MF, Giudici R. Polymerization kinetics of
pre-heated composite. J Dent Res. 2006;85:38-43. |
|