Signore A, Solimei L, Arakelyan MG, Arzukanyan AV, De Angelis N, Amaroli A. Marginal quality of a full-body bulk-fill composite placed with an universal adhesive system in etch-and-rinse and self-etch mode: An in vitro study. J Clin Exp Dent. 2021;13(8):e835-44.

 

doi:10.4317/jced.58081

https://doi.org/10.4317/jced.58081

___________

 

References

1. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent. 2003;28:215-35.

PMid:12760693

 

2. Ferracane JL. Resin composite--state of the art. Dent Mater. 2011;27:29-38.
https://doi.org/10.1016/j.dental.2010.10.020
PMid:21093034

 

3. Lutz F, Krejci I, Barbakow F. Quality and durability of marginal adaptation in bonded composite restorations. Dent Mater. 1991;7:107-13
https://doi.org/10.1016/0109-5641(91)90055-4

PMid:1936638

 

4. Ferracane JL. Developing a more complete understanding of stresses produced in dental composites during polymerization. Dent Mater. 2005;21:36-42.
https://doi.org/10.1016/j.dental.2004.10.004
PMid:15681000

 

5. Alster D, Venhoven BA, Feilzer AJ, Davidson CL. Influence of compliance of the substrate materials on polymerization contraction stress in thin resin composite layers. Biomaterials. 1997;18:337-41.
https://doi.org/10.1016/S0142-9612(96)00140-8

PMid:9068896

 

6. Davidson CL, Feilzer AJ. Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives. J Dent. 1997;25:435-40.
https://doi.org/10.1016/S0300-5712(96)00063-2

PMid:9604575

 

7. Choi KK, Ryu GJ, Choi SM, Lee MJ, Park SJ, Ferracane JL. Effects of cavity configuration on composite restoration. Oper Dent. 2005;29:462-9.

PMid:15279488

 

8. Oliveira LCA, Duarte S, Araujo CA, Abrahão A. Effect of low elastic modulus liner and base as stress-absorbing layer in composite resin restorations. Dent Mater. 2010;26:e159-69.
https://doi.org/10.1016/j.dental.2009.11.076
PMid:20031198

 

9. Haak R, Wicht MJ, Noack MJ. Marginal and internal adaptation of extended class I restorations lined with flowable composites. J Dent. 2003;31:231-9.
https://doi.org/10.1016/S0300-5712(03)00030-7

PMid:12735916

 

10. Mehl A, Hickel R, Kunzelmann KH. Physical properties and gap formation of light-cured composites with and without 'softstart-polymerization'. J Dent. 1997;5:321-30.
https://doi.org/10.1016/S0300-5712(96)00044-9

PMid:9175364

 

11. van Dijken JW, Pallesen U. A randomized controlled three year evaluation of "bulk-filled" posterior resin restorations based on stress decreasing resin technology. Dent Mater. 2014;30:e245-e51.
https://doi.org/10.1016/j.dental.2014.05.028
PMid:24958689

 

12. van Dijken JW, Lindberg A. A 15-year randomized controlled study of a reduced shrinkage stress resin composite. Dent Mater. 2015;31:1150-8.
https://doi.org/10.1016/j.dental.2015.06.012
PMid:26205382

 

13. El-Damanhoury HM, Platt JA. Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites. Oper Dent. 2014;39:374-82.
https://doi.org/10.2341/13-017-L
PMid:23865582

 

14. Heintze SD, Monreal D, Peschke A. Marginal Quality of Class II Composite Restorations Placed in Bulk Compared to an Incremental Technique: Evaluation with SEM and Stereomicroscope. J Adhes Dent. 2015;17:147-54.

PMid:25893223

 

15. Ilie N, Keßler A, Durner J. Influence of various irradiation processes on the mechanical properties and polymerisation kinetics of bulk-fill resin based composites. J Dent. 2013;41:695-702.
https://doi.org/10.1016/j.jdent.2013.05.008
PMid:23707645

 

16. Thomaidis S, Kakaboura A, Mueller WD, Zinelis S. Mechanical properties of contemporary composite resins and their interrelations. Dent Mater. 2013;29:e132-41.
https://doi.org/10.1016/j.dental.2013.04.025
PMid:23790281

 

17. Eick JD, Kotha SP, Chappelow CC, Kilway KV, Giese GJ, Glaros AG, et al. Properties of silorane-based dental resins and composites containing a stress-reducing monomer. Dent Mater. 2007;23:1011-7.
https://doi.org/10.1016/j.dental.2006.09.002
PMid:17097138

 

18. Benetti AR, Havndrup-Pedersen C, Honoré D, Pedersen MK, Pallesen U. Bulk-fill resin composites: polymerization contraction, depth of cure, and gap formation. Oper Dent. 2015;40:190-200.
https://doi.org/10.2341/13-324-L
PMid:25216940

 

19. Roggendorf MJ, Krämer N, Appelt A, Naumann M, Frankenberger R. Marginal quality of flowable 4-mm base vs. conventionally layered resin composite. J Dent. 2011;39:643-7.
https://doi.org/10.1016/j.jdent.2011.07.004
PMid:21801799

 

20. Perdigão J, Loguercio AD. Universal or multi-mode adhesives: why and how? J Adhes Dent. 2014;16:193-4.

PMid:24757706

 

21. Rosa WL, Piva E, Silva AF. Bond strength of universal adhesives: A systematic review and meta-analysis. J Dent. 2015; 43:765-76.
https://doi.org/10.1016/j.jdent.2015.04.003
PMid:25882585

 

22. Hanabusa M, Mine A, Kuboki T, Momoi Y, Van Ende A, Van Meerbeek B, et al. Bonding effectiveness of a new 'multi-mode' adhesive to enamel and dentine. J Dent. 2012;40:475-4.
https://doi.org/10.1016/j.jdent.2012.02.012
PMid:22381614

 

23. Tay FR, Pashley DH. Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent Mater. 2001;17:296-308.
https://doi.org/10.1016/S0109-5641(00)00087-7

PMid:11356206

 

24. Kaczor K, Gerula-Szymanska A, Smektala T, Safranow K, Lewusz K, Nowicka A. Effects of different etching modes on the nanoleakage of universal adhesives: A systematic review and meta-analysis. J Esthet Restor Dent. 2018;30:287-98.
https://doi.org/10.1111/jerd.12375
PMid:29573132

 

25. Van Landuyt KL, Yoshida Y, Hirata I, Snauwaert J, De Munck J, Okazaki M, et al. Influence of the chemical structure of functional monomers on their adhesive performance. J Dent Res. 2008;87:757-61.
https://doi.org/10.1177/154405910808700804
PMid:18650548

 

26. Loguercio AD, de Paula EA, Hass V, Luque-Martinez I, Reis A, Perdigão J. A new universal simplified adhesive: 36-Month randomized double-blind clinical trial. J Dent. 2015;43:1083-92.
https://doi.org/10.1016/j.jdent.2015.07.005
PMid:26159382

 

27. Scotti N, Cavalli G, Gagliani M, Breschi L. New adhesives and bonding techniques. Why and when International? J Esthet Dent. 2017;12:524-35.

PMid:28983535

 

28. van Dijken JW, Pallesen U. Three-year randomized clinical study of a one-step universal adhesive and a two-step self-etch adhesive in class II composite restorations. J Adhes Dent. 2017;19:287-94.

PMid:28849796

 

29. Nagarkar S, Theis-Mahon N, Perdigão J. Universal dental adhesives: Current status, laboratory testing, and clinical performance. J Biomed Mater Res B Appl Biomater. 2019;107:2121-31.
https://doi.org/10.1002/jbm.b.34305
PMid:30637932

 

30. Orlowski M, Tarczydlo B, Chalas R. Evaluation of marginal integrity of four bulk-fill dental composite materials: in vitro study. The Scientific World Journal. 2015;2015:701262.
https://doi.org/10.1155/2015/701262
PMid:25874254 PMCid:PMC4385685

 

31. Haak R, Näke T, Park KJ, Ziebolz D, Krause F, Schneider H. Internal and marginal adaptation of high-viscosity bulk-fill composites in class II cavities placed with different adhesive strategies. Odontology. 2019;107:374-82.
https://doi.org/10.1007/s10266-018-0402-1

PMid:30569286

 

32. McLean DE, Meyers EJ, Guillory VL, Vandewalle KS. Enamel bond strength of new universal adhesive bonding agents. Oper Dent. 2015;40:410-7.
https://doi.org/10.2341/13-287-L
PMid:25575201

 

33. Diniz AC, Bandeca MC, Pinheiro LM, Dos JS, Torres CR, Borges AH, et al. Influence of different etching modes on bond strength to enamel using universal adhesive systems. J Contemp Dent Pract. 2016;17:820-5.
https://doi.org/10.5005/jp-journals-10024-1937
PMid:27794152

 

34. Tsujimoto A, Barkmeier WW, Takamizawa T, Watanabe H, Johnson WW, Latta MA, et al. Influence of duration of phosphoric acid pre-etching on bond durability of universal adhesives and surface free-energy characteristics of enamel. Eur J Oral Sci. 2016;124:377-86.
https://doi.org/10.1111/eos.12284
PMid:27315775

 

35. Suzuki T, Takamizawa T, Barkmeier WW, Tsujimoto A, Endo H, Erickson RL, et al. Influence of etching mode on enamel bond durability of universal adhesive systems. Oper Dent. 2016;41:520-30.
https://doi.org/10.2341/15-347-L
PMid:27351078

 

36. Atoui JA, Chinelatti MA, Palma-Dibb RG, Corona SA. Mircoleakage in conservative cavities varying the preparation method and surface treatment. J Appl Oral Sci. 2010;18:421-5.
https://doi.org/10.1590/S1678-77572010000400017
PMid:20835580 PMCid:PMC5349067

 

37. Van Meerbeek B, Yoshihara K, Yoshida Y, Mine A, De Munck J, Van Landuyt KL. State of the art of self-etch adhesives. Dent Mater. 2011;27:17-28.
https://doi.org/10.1016/j.dental.2010.10.023
PMid:21109301

 

38. Wagner A, Wendler M, Petschelt A, Belli R, Lohbauer U. Bonding performance of universal adhesives in different etching modes. J Dent. 2014;42:800-7.
https://doi.org/10.1016/j.jdent.2014.04.012
PMid:24814138

 

39. Fujiwara S, Takamizawa T, Barkmeier WW, Tsujimoto A, Imai A, Watanabe H, et al. Effect of double-layer application on bond quality of adhesive systems. J Mech Behav Biomed Mater. 2018;77:501-9.
https://doi.org/10.1016/j.jmbbm.2017.10.008
PMid:29040961

 

40. Loguercio AD, Muñoz MA, Luque Martinez I, Hass V, Reis A, Perdigão J. Does active application of universal adhesives to enamel in self-etch mode improve their performance? J Dent. 2015;43:1060-70.
https://doi.org/10.1016/j.jdent.2015.04.005
PMid:25908573

 

41. Cardenas AM, Siqueira F, Rocha J, Szesz AL, Anwar M, El- Askary F, et al. Influence of conditioning time of universal adhesives on adhesive properties and enamel-etching pattern. Oper Dent. 2016;41:481-90.
https://doi.org/10.2341/15-213-L
PMid:26794190

 

42. Muñoz MA, Sezinando A, Luque-Martinez I, et al. Influence of a hydrophobic resin coating on the bonding efficacy of three universal adhesives. J Dent. 2014;42:595-602.
https://doi.org/10.1016/j.jdent.2014.01.013
PMid:24508503

 

43. Perdigão J, Muñoz M, Sezinando A, Luque-Martinez I, Staichak R, Reis A, Loguercio AD. Immediate adhesive properties to dentin and enamel of a universal adhesive associated with a hydrophobic resin coat. Oper Dent. 2014; 39:489-99.
https://doi.org/10.2341/13-203-LR
PMid:24299446

 

44. Scotti N, Comba A, Gambino A, Paolino DS, Alovisi M, Pasqualini D, et al. Microleakage at enamel and dentin margins with a bulk fills flowable resin. Eur J Dent. 2014;8:1-8.
https://doi.org/10.4103/1305-7456.126230
PMid:24966739 PMCid:PMC4054019

 

45. Francis AV, Braxton AD, Ahmad W, Tantbirojn D, Simon JF, Versluis A. Cuspal flexure and extent of cure of a bulk-fill flowable base composite. Oper Dent. 2015;40:515-23.
https://doi.org/10.2341/14-235-L
PMid:25741908

 

46. Gerula-Szymańska A, Kaczor K, Lewusz-Butkiewicz K, Nowicka A. Marginal integrity of flowable and packable bulk fill materials used for class II restorations - A systematic review and meta-analysis of in vitro studies. Dent Mater J. 2020;11:1-10.
https://doi.org/10.4012/dmj.2018-180
PMid:31932546

 

47. Juloski J, Carrabba M, Aragoneses JM, Forner L, Vichi A, Ferrari M. Microleakeage of Class II restorations and microtensile bond strenght to dentin of low shrinkage composites. Am J Dent. 2013;26:271-7.

PMid:24479279

 

48. Rengo C, Goracci C, Ametrano G, Chieffi N, Spagnuolo G, Rengo S, et al. Marginal Leakage of Class V Composite Restorations Assessed Using Microcomputed Tomography and Scanning Electron Microscope. Oper Dent. 2015;40:440-8.
https://doi.org/10.2341/14-022-L
PMid:25602350

 

49. Palin WM, Fleming GJ, Nathwani H, Burke FJ, Randall RC. In vitro cuspal deflection and microleakage of maxillary premolars restored with novel low-shrink dental composites. Dent Mater. 2005;21:324-35.
https://doi.org/10.1016/j.dental.2004.05.005
PMid:15766579

 

50. Furness A, Tadros MY, Looney SW, Rueggeberg FA. Effect of bulk/incremental fill on internal gap formation of bulk-fill composites. J Dent. 2014;42:439-49.
https://doi.org/10.1016/j.jdent.2014.01.005
PMid:24480086

 

51. Campos EA, Ardu S, Lefever D, Jassé FF, Bortolotto T, Krejci I. Marginal adaptation of class II cavities restored with bulkfill composites. J Dent. 2014;42:575-81.
https://doi.org/10.1016/j.jdent.2014.02.007
PMid:24561041

 

52. Fronza BM, Rueggeberg FA, Braga RR, Mogilevych B, Soares LE, Martin AA, Ambrosano G, Giannini M. Monomer conversion, microhardness, internal marginal adaptation, and shrinkage stress of bulk-fill resin composites. Dent Mater. 2015;31:1542-51.
https://doi.org/10.1016/j.dental.2015.10.001
PMid:26608118

 

53. Moorthy A, Hogg CH, Dowling AH, Grufferty BF, Benetti AR, Fleming GJ. Cuspal deflection and microleakage in premolar teeth restored with bulk-fill flowable resin-based composite base materials. J Dent. 2012;40:500-5.
https://doi.org/10.1016/j.jdent.2012.02.015
PMid:22390980

 

54. Abbas G, Fleming GJ, Harrington E, Shortall AC, Burke FJ. Cuspal movement and microleakage in premolar teeth restored with a packable composite cured in bulk or in increments. J Dent. 2003;3:437-44.
https://doi.org/10.1016/S0300-5712(02)00121-5

PMid:12878027

 

55. Peutzfeldt A, Mühlebach S, Lussi A, Flury S. Marginal Gap Formation in Approximal "Bulk Fill" Resin Composite Restorations After Artificial Ageing. Oper Dent. 2018;43:180-9.
https://doi.org/10.2341/17-068-L
PMid:29148914

 

56. Marchesi G, Frassetto A, Mazzoni A, Apolonio F, Diolosà M, Cadenaro M, et al. Adhesive performance of a multi-mode adhesive system: 1-year in vitro study. J Dent. 2014;42:603-12.
https://doi.org/10.1016/j.jdent.2013.12.008
PMid:24373855

 

57. Flury S, Peutzfeldt A, Lussi A. Influence of increment thickness on microhardness and dentin bond strength of bulk fill resin composites. Dent Mater. 2014;30:1104-12.
https://doi.org/10.1016/j.dental.2014.07.001
PMid:25086481

 

58. Dietschi D, Argente A, Krejci I, Mandikos M. In vitro performance of Class I and II composite restorations: a literature review on nondestructive laboratory trials - Part I. Oper Dent. 2013;38:e166-81.
https://doi.org/10.2341/12-020A-LIT
PMid:23738673

 

59. Frankenberger R, Krämer N, Lohbauer U, Nikolaenko SA, Reich SM. Marginal integrity: is the clinical performance of bonded restorations predictable in vitro? J Adhes Dent. 2007;9:107-16.

PMid:18341237

 

60. Roulet JF. Is in vitro research in restorative dentistry useless? J Adhes Dent. 2012;14:103-4.

PMid:22518387

 

61. Frankenberger R, Tay FR. Self-etch vs etch-and-rinse adhesives: effect of thermo-mechanical fatigue loading on marginal quality of bonded resin composite restorations. Dent Mater. 2005;21:397-412.
https://doi.org/10.1016/j.dental.2004.07.005
PMid:15826696

 

62. Heintze S, Forjanic M, Cavalleri A. Microleakage of Class II restorations with different tracers--comparison with SEM quantitative analysis. J Adhes Dent .2008;10:259-67.

PMid:18792696