de Almeida RM, Hass V, Sasaki DY, Berger SB, Fernandes TM, Tonetto MR. The impact of different surface treatments on the shear bond strength of orthodontic metal brackets applied to different cad/cam composites. J Clin Exp Dent. 2021;13(6):e608-13.

doi:10.4317/jced.58137

___________

References

1. Kollmuss M, Kist S, Goeke JE, Hickel R, Huth KC. Comparison of chairside and laboratory CAD/CAM to conventional produced all-ceramic crowns regarding morphology, occlusion, and aesthetics. Clin Oral Investig. 2016;20:791-97. https://doi.org/10.1007/s00784-015-1554-9 PMid:26245275

2. Mainjot AK, Dupont NM, Oudkerk JC, Dewael TY, Sadoun MJ. From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites. J Dent Res. 2016;95:487-95. https://doi.org/10.1177/0022034516634286 PMid:26933136

3. Abdelnaby YL. Effects of cyclic loading on the bond strength of metal orthodontic brackets bonded to a porcelain surface using different conditioning protocols. Angle Orthod. 2011;81:1064-69. https://doi.org/10.2319/030211-151.1 PMid:21671712

4. Abu Alhaija ES, Abu AlReesh IA, AlWahadni AM. Factors affecting the shear bond strength of metal and ceramic brackets bonded to different ceramic surfaces. Eur J Orthod. 2010;32:274-80. https://doi.org/10.1093/ejo/cjp098 PMid:19903729

5. Colombo LDA, Murillo-Gomez F, De Goes MF. Bond Strength of CAD/CAM Restorative Materials Treated with Different Surface Etching Protocols. J Adhes Dent. 2019;21:307-17. PMid:31432045

6. Emsermann I, Eggmann F, Krastl G, Weiger R, Amato J. Influence of Pretreatment Methods on the Adhesion of Composite and Polymer Infiltrated Ceramic CAD-CAM Blocks. J Adhes Dent. 2019;21:433-43. PMid:31517315

7. Peumans M, Valjakova EB, De Munck J, Mishevska CB, Van Meerbeek B. Bonding Effectiveness of Luting Composites to Different CAD/CAM Materials. J Adhes Dent. 2016;18:289-302. PMid:27222889

8. Spitznagel FA, Vuck A, Gierthmühlen PC, Blatz MB, Horvath SD. Adhesive Bonding to Hybrid Materials: An Overview of Materials and Recommendations. Compend Contin Educ Dent. 2016;37:630-7. PMid:27700131

9. Monobond Etch and Prime. 2015. http://www.ivoclarvivadent.com. Accessed May 11, 2020.

10. Buyuk SK, Kucukekenci AS. Effects of different etching methods and bonding procedures on shear bond strength of orthodontic metal brackets applied to different CAD/CAM ceramic materials. Angle Orthod. 2018;88:221-6. https://doi.org/10.2319/070917-455.1 PMid:29140719

11. Elsaka SE. Influence of surface treatments on bond strength of metal and ceramic brackets to a novel CAD/CAM hybrid ceramic material. Odontology. 2016;104:68-76. https://doi.org/10.1007/s10266-014-0188-8 PMid:25585677

12. Artun J, Bergland S. Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment. Am J Orthod. 1984;85:333-40. https://doi.org/10.1016/0002-9416(84)90190-8 PMid:6231863

13. Papadopoulos K, Pahinis K, Saltidou K, Dionysopoulos D, Tsitrou E. Evaluation of the Surface Characteristics of Dental CAD/CAM Materials after Different Surface Treatments. Materials (Basel). 2020;13:981. https://doi.org/10.3390/ma13040981 PMid:32098305 PMCid:PMC7078785

14. Gilbert S, Keul C, Roos M, Edelhoff D, Stawarczyk B. Bonding between CAD/CAM resin and resin composite cements dependent on bonding agents: three different in vitro test methods. Clin Oral Investig. 2016;20:227-36. https://doi.org/10.1007/s00784-015-1494-4 PMid:26001334

15. Brentel AS, Ozcan M, Valandro LF, Alarca LG, Amaral R, Bottino MA. Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions. Dent Mater. 2007;23:1323-31. https://doi.org/10.1016/j.dental.2006.11.011 PMid:17188745

16. Tian T, Tsoi JK, Matinlinna JP, Burrow MF. Aspects of bonding between resin luting cements and glass ceramic materials. Dent Mater. 2014;30:e147-62. https://doi.org/10.1016/j.dental.2014.01.017 PMid:24612840

17. Ramakrishnaiah R, Alkheraif AA, Divakar DD, Matinlinna JP, Vallittu PK. The Effect of Hydrofluoric Acid Etching Duration on the Surface Micromorphology, Roughness, and Wettability of Dental Ceramics. Int J Mol Sci. 2016;17:822. https://doi.org/10.3390/ijms17060822 PMid:27240353 PMCid:PMC4926356

18. Matinlinna JP, Lung CYK, Tsoi JKH. Silane adhesion mechanism in dental applications and surface treatments: A review. Dent Mater. 2018;34:13-28. https://doi.org/10.1016/j.dental.2017.09.002 PMid:28969848

19. Murillo-Gomez F, Palma-Dibb RG, De Goes MF. Effect of acid etching on tridimensional microstructure of etchable CAD/CAM materials. Dent Mater. 2018;34:944-55. https://doi.org/10.1016/j.dental.2018.03.013 PMid:29661579

20. Franz A, Raabe M, Lilaj B, Dauti R, Moritz A, Müßig D, et al. Effect of two different primers on the shear bond strength of metallic brackets to zirconia ceramic. BMC Oral Health. 2019;19:51. https://doi.org/10.1186/s12903-019-0740-6 PMid:30922281 PMCid:PMC6437858

21. Tezvergil A, Lassila LV, Vallittu PK. Composite-composite repair bond strength: effect of different adhesion primers. J Dent. 2003;31:521-5. https://doi.org/10.1016/S0300-5712(03)00093-9 PMid:14554068

22. Saraç Y, Külünk T, Elekdağ-Türk S, Saraç D, Türk T. Effects of surface-conditioning methods on shear bond strength of brackets bonded to different all-ceramic materials. Eur J Orthod. 2011;33:667-72. https://doi.org/10.1093/ejo/cjq132 PMid:21228120

23. Reynolds IR. A Review of Direct Orthodontic Bonding. Br J Orthod. 1975;2:171-8. https://doi.org/10.1080/0301228X.1975.11743666