Pereira PL, Pereira R, Silva BG, Lins RBE, Lima DANL, Aguiar FHB. Effect of wetting agent coverage on the surface properties of resin composite submitted to brushing and staining cycles. J Clin Exp Dent. 2021;13(8):e795-801.

 

doi:10.4317/jced.58311

https://doi.org/10.4317/jced.58311

___________

 

References

1. Bayne SC, Ferracane JL, Marshall GW, Marshall SJ, van Noort R. The evolution of dental materials over the past century: silver and gold to tooth color and beyond. J Dent Res. 2019;98:257-265.
https://doi.org/10.1177/0022034518822808
PMid:30784370

 

2. Holden ACL. Cosmetic dentistry: A socioethical evaluation. Bioethics 2018;32:602-610. https://doi.org/10.1111/bioe.12498
PMid:30194688

 

3. Blatz MB, Chiche G, Bahat O, Roblee R, Coachman C, Heymann HO. Evolution of aesthetic dentistry. J Dent Res. 2019;98:1294-1304.
https://doi.org/10.1177/0022034519875450
PMid:31633462

 

4. Palin WM, Leprince JG, Hadis MA. Shining a light on high volume photocurable materials. Dent Mater. 2018;34:695-710.
https://doi.org/10.1016/j.dental.2018.02.009
PMid:29549967

 

5. Tjan AH, Glancy JF. Effects of four lubricants used during incremental insertion of two types of visible light-activated composites. J Prosthet Dent. 1988;60:189-194.
https://doi.org/10.1016/0022-3913(88)90314-9

 

6. Perdigăo J, Gomes G. Effect of instrument lubricant on the cohesive strength of a hybrid resin composite. Quintessence Int. 2006;37:621-625.

PMid:16922021

 

7. Dunn WJ, Strong TC. Effect of alcohol and unfilled resin in the incremental buildup of resin composite. Quintessence Int. 2007;38:e20-e36.

PMid:17508071

 

8. Sedrez-Porto JA, Münchow EA, Brondani LP, Cenci MS, Pereira-Cenci T. Effects of modeling liquid/resin and polishing on the color change of resin composite. Braz Oral Res. 2016;30:S1806-83242016000100275.
https://doi.org/10.1590/1807-3107BOR-2016.vol30.0088
PMid:27556554

 

9. Sedrez-Porto JA, Münchow EA, Cenci MS, Pereira-Cenci T. Translucency and color stability of resin composite and dental adhesives as modeling liquids - A one-year evaluation. Braz Oral Res. 2017;31:e54.
https://doi.org/10.1590/1807-3107bor-2017.vol31.0054
PMid:28678973

 

10. Barcellos DC, Pucci CR, Torres CR, Goto EH, Inocencio AC. Effects of resinous monomers used in restorative dental modeling on the cohesive strength of composite resin. J Adhes Dent. 2008;10:351-354.

PMid:19058680

 

11. De Munck J, Arita A, Shirai K, Van Landuyt KL, Coutinho E, Poitevin A, et al. Microrotary fatigue resistance of a HEMA-free all-in-one adhesive bonded to dentin. J Adhes Dent. 2007;9:373-379.

PMid:17847640

 

12. Tuncer S, Demirci M, Tiryaki M, Unlü N, Uysal Ö. The effect of a modeling resin and thermocycling on the surface hardness, roughness, and color of different resin composites. J Esthet Restor Dent. 2013;25:404-419.
https://doi.org/10.1111/jerd.12063
PMid:24172016

 

13. Kutuk ZB, Erden E, Aksahin DL, Durak ZE, Dulda AC. Influence of modeling agents on the surface properties of an esthetic nano-hybrid composite. Restor Dent Endod. 2020;45:e13.
https://doi.org/10.5395/rde.2020.45.e13
PMid:32483531 PMCid:PMC7239675

 

14. Ferretti MA, Pereira R, Lins RBE, Soares MGC, Pinto LJH, Martins LRM, et al. Characterization of low-cost Brazilian resin composites submitted to tooth brushing. Braz Oral Res. 2021;35:e10.
https://doi.org/10.1590/1807-3107bor-2021.vol35.0010
PMid:33206783

 

15. International Organization for Standardization. ISO:2813. Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees. 2014:23p.

 

16. International Organization for Standardization. ISO/TS:14569-2. Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact. 2001.

 

17. International Organization for Standardization. ISO:11609. Dentistry - Dentifrices - Requirements, test methods and marking. 2010:20p.

 

18. Goldstein GR, Lerner T. The effect of toothbrushing on a hybrid composite resin. J Prosthet Dent. 1991;66:498-500.
https://doi.org/10.1016/0022-3913(91)90511-T

PMid:1791560

 

19. Takahashi R, Jin J, Nikaido T, Tagami J, Hickel R, Kunzelmann KH. Surface characterization of current composites after toothbrush abrasion. Dent Mater J. 2013;32:75-82.
https://doi.org/10.4012/dmj.2012-160
PMid:23370873

 

20. Ruivo MA, Pacheco RR, Sebold M, Giannini M. Surface roughness and filler particles characterization of resin-based composites. Microsc Res Tech. 2019;82:1756-1767.
https://doi.org/10.1002/jemt.23342
PMid:31313442

 

21. Tantanuch S, Kukiattrakoon B, Peerasukprasert T, Chanmanee N, Chaisomboonphun P, Rodklai A. Surface roughness and erosion of nanohybrid and nanofilled resin composites after immersion in red and white wine. J Conserv Dent. 2016;19:51-55.
https://doi.org/10.4103/0972-0707.173199
PMid:26957794 PMCid:PMC4760014

 

22. Borges MG, Soares CJ, Maia TS, Bicalho AA, Barbosa TP, Costa HL, et al. Effect of acidic drinks on shade matching, surface topography, and mechanical properties of conventional and bulk-fill composite resins. J Prosthet Dent. 2019;121:868.e1-868.e8.
https://doi.org/10.1016/j.prosdent.2019.02.006
PMid:31010591

 

23. Badra VV, Faraoni JJ, Ramos RP, Palma-Dibb RG. Influence of different beverages on the microhardness and surface roughness of resin composites. Oper Dent. 2005;30:213-219.

PMid:15853107

 

24. Poggio C, Ceci M, Beltrami R, Mirando M, Wassim J, Colombo M. Color stability of esthetic restorative materials: a spectrophotometric analysis. Acta Biomater Odontol Scand. 2016;10;2:95-101.
https://doi.org/10.1080/23337931.2016.1217416
PMid:28642918 PMCid:PMC5433231

 

25. Poggio C, Vialba L, Berardengo A, Federico R, Colombo M, Beltrami R, et al. Color stability of new esthetic restorative materials: a spectrophotometric analysis. J Funct Biomater. 2017;8:26.
https://doi.org/10.3390/jfb8030026
PMid:28684672 PMCid:PMC5618277

 

26. Vance M, Lawson NC, Rupal M, Beck P, Burgess JO. Color and gloss of nano-filled resin-modified glass ionomers and resin composites. J Esthet Restor Dent. 2015;27:293-299.
https://doi.org/10.1111/jerd.12118
PMid:25439032

 

27. Lemos CA, Mauro SJ, Dos Santos PH, Briso AL, Fagundes TC. Influence of mechanical and chemical degradation in the surface roughness, gloss, and color of microhybrid composites. J Contemp Dent Pract. 2017;18:283-288.
https://doi.org/10.5005/jp-journals-10024-2032
PMid:28349905

 

28. Emami N, Sjödahl M, Söderholm KJ. How filler properties, filler fraction, sample thickness and light source affect light attenuation in particulate filled resin composites. Dent Mater. 2005;21:721-730. https://doi.org/10.1016/j.dental.2005.01.002
PMid:15885764

 

29. Peutzfeldt A, Asmussen E. Determinants of in vitro gap formation of resin composites. J Dent. 2004;32:109-115.
https://doi.org/10.1016/j.jdent.2003.08.008
PMid:14749082

 

30. Patel J, Granger C, Parker S, Patel M. The effect of instrument lubricant on the diametral tensile strength and water uptake of posterior composite restorative material. J Dent. 2017;56:33-38.
https://doi.org/10.1016/j.jdent.2016.10.006
PMid:27746333