Juntavee N, Juntavee A, Phattharasophachai T. Fracture toughness of different monolithic zirconia upon post-sintering processes. J Clin Exp Dent. 2021;13(10):e1006-14.

 

doi:10.4317/jced.58717

https://doi.org/10.4317/jced.58717

___________

 

References

1. Zucuni CP, Guilardi LF, Rippe MP, Pereira GKR, Valandro LF. Fatigue strength of yttria-stabilized zirconia polycrystals: Effects of grinding, polishing, glazing, and heat treatment. J Mech Behav Biomed Mater. 2017;75:512-520.
https://doi.org/10.1016/j.jmbbm.2017.06.016
PMid:28843883

 

2. Li RW, Chow TW, Matinlinna JP. Ceramic dental biomaterials and CAD/CAM technology: state of the art. J Prosthodont Res. 2014;58:208-16.
https://doi.org/10.1016/j.jpor.2014.07.003
PMid:25172234

 

3. Candido LM, Miotto LN, Fais L, Cesar PF, Pinelli L. Mechanical and Surface Properties of Monolithic Zirconia. Oper Dent. 2018;43:119-128.
https://doi.org/10.2341/17-019-L
PMid:29676981

 

4. Juntavee N, Attashu S. Effect of different sintering processes on flexural strength of translucency monolithic zirconia. J Clin Exp Dent. 2018;10:e821-e830.
https://doi.org/10.4317/jced.54749
PMid:30305883 PMCid:PMC6174017

 

5. Pereira GK, Fraga S, Montagner AF, Soares FZ, Kleverlaan CJ, Valandro LF. The effect of grinding on the mechanical behavior of Y-TZP ceramics: A systematic review and meta-analyses. J Mech Behav Biomed Mater. 2016;63:417-442.
https://doi.org/10.1016/j.jmbbm.2016.06.028
PMid:27469603

 

6. Yang SW, Kim JE, Shin Y, Shim JS, Kim JH. Enamel wear and aging of translucent zirconias: In vitro and clinical studies. J Prosthet Dent. 2019;121:417-425.
https://doi.org/10.1016/j.prosdent.2018.04.016
PMid:30391060

 

7. Ghodsi S, Jafarian Z. A Review on Translucent Zirconia. Eur J Prosthodont Restor Dent. 2018;26:62-74.

PMid:29797847

 

8. Zhang Y, Lawn BR. Novel Zirconia Materials in Dentistry. J Dent Res. 2018;97:140-147.
https://doi.org/10.1177/0022034517737483
PMid:29035694 PMCid:PMC5784474

 

9. Zhang F, Inokoshi M, Batuk M, Hadermann J, Naert I, Van Meerbeek B, et al. Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations. Dent Mater. 2016;32:e327-e337.
https://doi.org/10.1016/j.dental.2016.09.025
PMid:27697332

 

10. Denry IL, Holloway JA. Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics. J Biomed Mater Res B Appl Biomater. 2006;76B:440-448.
https://doi.org/10.1002/jbm.b.30382
PMid:16184529

 

11. Inokoshi M, Shimizu H, Nozaki K, Takagaki T, Yoshihara K, Nagaoka N, et al. Crystallographic and morphological analysis of sandblasted highly translucent dental zirconia. Dent Mater. 2018;34:508-518.
https://doi.org/10.1016/j.dental.2017.12.008
PMid:29325861

 

12. Hasegawa H. Rhombohedral phase produced in abraded surfaces of partially stabilized zirconia (PSZ). J Mater Sci Let. 1983;2:91-93.
https://doi.org/10.1007/BF00722220

 

13. Kondoh J. Origin of the hump on the left shoulder of the X-ray diffraction peaks observed in Y2O3-fully and partially stabilized ZrO2. J Allo Comp. 2004;375:270-282.
https://doi.org/10.1016/j.jallcom.2003.11.129

 

14. Yilmaz H, Aydin C, Gul BE. Flexural strength and fracture toughness of dental core ceramics. J Prosthet Dent 2007;98:120-128.
https://doi.org/10.1016/S0022-3913(07)60045-6

PMid:17692593

 

15. Ćorić D, Renjo MM, Ćurković L. Vickers indentation fracture toughness of Y-TZP dental ceramics. Int J Refract Metals Hard Mater. 2016;64:14-19.
https://doi.org/10.1016/j.ijrmhm.2016.12.016

 

16. Scherrer SS, Denry IL, Wiskott HW. Comparison of three fracture toughness testing techniques using a dental glass and a dental ceramic. Dent Mater. 1998;14:246-255.
https://doi.org/10.1016/S0109-5641(98)00032-3

PMid:10379252

 

17. Sinavarat P, Anunmana C, Muanjit T. Simplified method for determining fracture toughness of two dental ceramics. Dent Mater J. 2016;35:76-81.
https://doi.org/10.4012/dmj.2015-147
PMid:26830826

 

18. Moradkhani A, Baharvandi H, Naserifar A. Fracture Toughness of 3Y-TZP Dental Ceramics by Using Vickers Indentation Fracture and SELNB Method. J Korean Ceram Soc. 2019;56:37-48.
https://doi.org/10.4191/kcers.2019.56.1.01

 

19. Cesar PF, Della Bona A, Scherrer SS, Tholey M, van Noort R, Vichi A, et al. ADM guidance-Ceramics: Fracture toughness testing and method selection. Dent Mater. 2017;33:575-584.
https://doi.org/10.1016/j.dental.2017.03.006
PMid:28392020

 

20. Sadighpour L, Geramipanah F, Raeisi B. In vitro mechanical tests for modern dental ceramics. Front Dent. 2006;3:143-152.

 

21. Ozer F, Naden A, Turp V, Mante F, Sen D, Blatz MB. Effect of thickness and surface modifications on flexural strength of monolithic zirconia. J Prosthet Dent. 2018;119:987-993.
https://doi.org/10.1016/j.prosdent.2017.08.007
PMid:29042115

 

22. Zucuni CP, Guilardi LF, Rippe MP, Pereira GKR, Valandro LF. Polishing of ground y-tzp ceramic is mandatory for improving the mechanical behavior. Braz Dent J. 2018;29:483-491.
https://doi.org/10.1590/0103-6440201802044
PMid:30517448

 

23. Ramos GF, Pereira GK, Amaral M, Valandro LF, Bottino MA. Effect of grinding and heat treatment on the mechanical behavior of zirconia ceramic. Braz Oral Res. 2016;30:1-8.
https://doi.org/10.1590/1807-3107BOR-2016.vol30.0012
PMid:26676188

 

24. Huh YH, Park CJ, Cho LR. Evaluation of various polishing systems and the phase transformation of monolithic zirconia. J Prosthet Dent. 2016;116:440-449.
https://doi.org/10.1016/j.prosdent.2016.01.021
PMid:27061631

 

25. Guilardi LF, Pereira GKR, Gündel A, Rippe MP, Valandro LF. Surface micro-morphology, phase transformation, and mechanical reliability of ground and aged monolithic zirconia ceramic. J Mech Behav Biomed Mater. 2017;65:849-856.
https://doi.org/10.1016/j.jmbbm.2016.10.008
PMid:27810731

 

26. Mohammadi-Bassir M, Jamshidian M, Rezvani MB, Babasafari M. Effect of coarse grinding, overglazing, and 2 polishing systems on the flexural strength, surface roughness, and phase transformation of yttrium-stabilized tetragonal zirconia. J Prosthet Dent. 2017;118:658-665.
https://doi.org/10.1016/j.prosdent.2016.12.019
PMid:28385438

 

27. Janyavula S, Lawson N, Cakir D, Beck P, Ramp LC, Burgess JO. The wear of polished and glazed zirconia against enamel. J Prosthet Dent. 2013;109:22-29.
https://doi.org/10.1016/S0022-3913(13)60005-0

PMid:23328193

 

28. Denry I, Kelly JR. Emerging ceramic-based materials for dentistry. J Dent Res. 2014;93:1235-1242.
https://doi.org/10.1177/0022034514553627
PMid:25274751 PMCid:PMC4237640

 

29. Traini T, Gherlone E, Ferrari Parabita S, Caputi S, Piattelli A. Fracture toughness and hardness of a Y-TZP dental ceramic after mechanical surface treatments. Clin Oral Investig. 2013;18:707-714.
https://doi.org/10.1007/s00784-013-1018-z
PMid:23793405

 

30. Borba M, de Araujo MD, de Lima E, Yoshimura HN, Cesar PF, Griggs JA, et al. Flexural strength and failure modes of layered ceramic structures. Dent Mater. 2011;27:1259-1266.
https://doi.org/10.1016/j.dental.2011.09.008
PMid:21982199 PMCid:PMC3205330