Taghva M, Enteghad S, Jamali A, Mohaghegh M. Comparison of shear bond strength of CAD/CAM and conventional heat-polymerized acrylic resin denture bases to auto-polymerized and heat-polymerized acrylic resins after aging. J Clin Exp Dent. 2022;14(1):e72-8.

doi:10.4317/jced.59097

___________

References

1. Huumonen S, Haikola B, Oikarinen K, Söderholm AL, Remes-Lyly T, Sipilä K. Residual ridge resorption, lower denture stability and subjective complaints among edentulous individuals. J Oral Rehabil. 2012;39:384-90. https://doi.org/10.1111/j.1365-2842.2011.02284.x PMid:22289034

2. Pham NQ, Gonda T, Maeda Y, Ikebe K. Average rate of ridge resorption in denture treatment: A Systematic Review. J Prosthodont Res. 2021;65:429-37. https://doi.org/10.2186/jpr.JPR_D_20_00075 PMid:33281173

3. Gad MM, Rahoma A, Abualsaud R, Al-Thobity AM, Akhtar S, Helal MA, et al. Impact of different surface treatments and repair material reinforcement on the flexural strength of repaired PMMA denture base material. Dent Mater J. 2020;39:471-82. https://doi.org/10.4012/dmj.2018-436 PMid:32092720

4. Arun Kumar P, Iniyan K, Balasubramaniam R, Viswanathan M, Hines PAJ, Monnica V. The Effect of Surface Treatments on the Shear Bond Strength of Acrylic Resin Denture Base With Different Repair Acrylic Resin: An In Vitro Study. J Pharm Bioallied Sci. 2019;11:S380-s4. https://doi.org/10.4103/JPBS.JPBS_40_19 PMid:31198373 PMCid:PMC6555324

5. Kreve S, Dos Reis AC. Denture Liners: A Systematic Review Relative to Adhesion and Mechanical Properties. ScientificWorldJournal. 2019;2019:6913080. https://doi.org/10.1155/2019/6913080 PMid:30940994 PMCid:PMC6421019

6. Nagai E, Otani K, Satoh Y, Suzuki S. Repair of denture base resin using woven metal and glass fiber: effect of methylene chloride pretreatment. J Prosthet Dent. 2001;85:496-500. https://doi.org/10.1067/mpr.2001.115183 PMid:11357077

7. Kubo CS, Amaral FR, de Campos E. Relining of removable dentures: a literature review. RSBO Revista Sul-Brasileira de Odontologia. 2014;11:192-8.

8. Cucci AL, Vergani CE, Giampaolo ET, Afonso MC. Water sorption, solubility, and bond strength of two autopolymerizing acrylic resins and one heat-polymerizing acrylic resin. J Prosthet Dent. 1998;80:434-8. https://doi.org/10.1016/S0022-3913(98)70008-3

9. Mahajan N, Datta K. Comparison of bond strength of auto polymerizing, heat cure soft denture liners with denture base resin - An In Vitro study. J Indian Prosthodont Soc. 2010;10:31-5. https://doi.org/10.1007/s13191-010-0001-5 PMid:23204718 PMCid:PMC3453173

10. Takahashi Y, Chai J. Shear bond strength of denture reline polymers to denture base polymers. Int J Prosthodont. 2001;14:271-5.

11. Fatemi FS, Vojdani M, Khaledi AAR. The Effect of Food-Simulating Agents on the Bond Strength of Hard Chairside Reline Materials to Denture Base Resin. J Prosthodont. 2019;28:e357-e63. https://doi.org/10.1111/jopr.12905 PMid:29883009

12. Ahmad F, Dent M, Yunus N. Shear bond strength of two chemically different denture base polymers to reline materials. J Prosthodont. 2009;18:596-602. https://doi.org/10.1111/j.1532-849X.2009.00481.x PMid:19515166

13. Ates SM, Caglar I, Ozdogan A, Duymus ZY. The effect of denture cleansers on surface roughness and bond strength of a denture base resin‏. Journal of adhesion science technology. 2017;31:171-81. https://doi.org/10.1080/01694243.2016.1205273

14. Kümbüloğlu Ö, Yildirim B, Al-Haj Husain N, Özcan M. Adhesion potential of relining materials to polyamide and PMMA-based denture base materials: effect of surface conditioning methods. Journal of Adhesion Science Technology. 2019;33:1939-47. https://doi.org/10.1080/01694243.2019.1617935

15. AlZaher ZA, Almaskin DF, Qaw MS, Abu Showmi TH, Abualsaud R, Akhtar S, et al. Chemo-Mechanical Approach to Improve Repair Bond Strength of Denture Teeth. International Journal of Dentistry. 2020;2020. https://doi.org/10.1155/2020/8870361 PMid:33204267 PMCid:PMC7661136

16. Choi JE, Ng TE, Leong CKY, Kim H, Li P, Waddell JN. Adhesive evaluation of three types of resilient denture liners bonded to heat-polymerized, autopolymerized, or CAD-CAM acrylic resin denture bases. J Prosthet Dent. 2018;120:699-705. https://doi.org/10.1016/j.prosdent.2018.01.032 PMid:29961623

17. Bilgin MS, Baytaroğlu EN, Erdem A, Dilber E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. Eur J Dent. 2016;10:286-91. https://doi.org/10.4103/1305-7456.178304 PMid:27095912 PMCid:PMC4813451

18. Janeva NM, Kovacevska G, Elencevski S, Panchevska S, Mijoska A, Lazarevska B. Advantages of CAD/CAM versus Conventional Complete Dentures - A Review. Open Access Maced J Med Sci. 2018;6:1498-502. https://doi.org/10.3889/oamjms.2018.308 PMid:30159084 PMCid:PMC6108805

19. Steinmassl PA, Klaunzer F, Steinmassl O, Dumfahrt H, Grunert I. Evaluation of Currently Available CAD/CAM Denture Systems. Int J Prosthodont. 2017;30:116-22. https://doi.org/10.11607/ijp.5031 PMid:28267817

20. Kattadiyil MT, Jekki R, Goodacre CJ, Baba NZ. Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral setting. J Prosthet Dent. 2015;114:818-25. https://doi.org/10.1016/j.prosdent.2015.08.001 PMid:26412000

21. Prpić V, Schauperl Z, Ćatić A, Dulčić N, Čimić S. Comparison of Mechanical Properties of 3D-Printed, CAD/CAM, and Conventional Denture Base Materials. J Prosthodont. 2020;29:524-8. https://doi.org/10.1111/jopr.13175 PMid:32270904

22. Wemken G, Burkhardt F, Spies BC, Kleinvogel L, Adali U, Sterzenbach G, et al. Bond strength of conventional, subtractive, and additive manufactured denture bases to soft and hard relining materials. Dent Mater. 2021;37:928-38. https://doi.org/10.1016/j.dental.2021.02.018 PMid:33722400

23. Faot F, da Silva WJ, da Rosa RS, Del Bel Cury AA, Garcia RC. Strength of denture base resins repaired with auto- and visible light-polymerized materials. J Prosthodont. 2009;18:496-502. https://doi.org/10.1111/j.1532-849X.2009.00470.x PMid:19432755

24. Akin H, Tugut F, Guney U, Akar T. Shear bond strength of denture teeth to two chemically different denture base resins after various surface treatments. J Prosthodont. 2014;23:152-6. https://doi.org/10.1111/jopr.12081 PMid:23889780

25. Hout D, Wonglamsam A, Kanchanavasita W. Flexural strength of relined denture base using different thickness of self-cured relining material. M Dent J. 2017;37:223-32.

26. AlQahtani M, Haralur SB. Influence of Different Repair Acrylic Resin and Thermocycling on the Flexural Strength of Denture Base Resin. Medicina (Kaunas). 2020;56. https://doi.org/10.3390/medicina56020050 PMid:31973219 PMCid:PMC7074266

27. Choi JJE, Uy CE, Plaksina P, Ramani RS, Ganjigatti R, Waddell JN. Bond Strength of Denture Teeth to Heat-Cured, CAD/CAM and 3D Printed Denture Acrylics. J Prosthodont. 2020;29:415-21. https://doi.org/10.1111/jopr.13125 PMid:31697004

28. Azevedo A, Machado AL, Giampaolo ET, Pavarina AC, Vergani CE. The effect of water immersion on the shear bond strength between chairside reline and denture base acrylic resins. J Prosthodont. 2007;16:255-62. https://doi.org/10.1111/j.1532-849X.2007.00188.x PMid:17451479

29. Silva Cde S, Machado AL, Chaves Cde A, Pavarina AC, Vergani CE. Effect of thermal cycling on denture base and autopolymerizing reline resins. J Appl Oral Sci. 2013;21:219-24. https://doi.org/10.1590/1679-775720130061 PMid:23857648 PMCid:PMC3881901

30. Doğan A, Bek B, Cevik NN, Usanmaz A. The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption. J Dent. 1995;23:313-8. https://doi.org/10.1016/0300-5712(94)00002-W

31. Leong A, Grant AA. The transverse strength of repairs in polymethyl methacrylate. Aust Dent J. 1971;16:232-4. https://doi.org/10.1111/j.1834-7819.1971.tb03412.x PMid:4940671

32. Agarwal M, Nayak A, Hallikerimath R. A study to evaluate the transverse strength of repaired acrylic denture resins with conventional heat-cured, autopolymerizing and microwave-cured resins: an in vitro study. The Journal of Indian Prosthodontic Society. 2008;8:36. https://doi.org/10.4103/0972-4052.43252

33. Rached RN, Powers JM, Del Bel Cury AA. Repair strength of autopolymerizing, microwave, and conventional heat-polymerized acrylic resins. J Prosthet Dent. 2004;92:79-82. https://doi.org/10.1016/j.prosdent.2004.04.005 PMid:15232565

34. Dayan C, Guven MC, Gencel B, Bural C. A Comparison of the Color Stability of Conventional and CAD/CAM Polymethyl Methacrylate Denture Base Materials. Acta Stomatol Croat. 2019;53:158-67. https://doi.org/10.15644/asc53/2/8 PMid:31341324 PMCid:PMC6604561

35. Iwaki M, Kanazawa M, Arakida T, Minakuchi S. Mechanical properties of a polymethyl methacrylate block for CAD/CAM dentures. J Oral Sci. 2020;62:420-2. https://doi.org/10.2334/josnusd.19-0448 PMid:32908079

36. Marra J, de Souza RF, Barbosa DB, Pero AC, Compagnoni MA. Evaluation of the bond strength of denture base resins to acrylic resin teeth: effect of thermocycling. J Prosthodont. 2009;18:438-43. https://doi.org/10.1111/j.1532-849X.2009.00478.x PMid:19515169

37. Choi JJE, Ramani RS, Ganjigatti R, Uy CE, Plaksina P, Waddell JN. Adhesion of Denture Characterizing Composites to Heat-Cured, CAD/CAM and 3D Printed Denture Base Resins. J Prosthodont. 2021;30:83-90. https://doi.org/10.1111/jopr.13291 PMid:33215778