Mokhtar MM, Farahat DS, Eldars W, Osman MF. Physico-mechanical properties and bacterial adhesion of resin composite CAD/CAM blocks: An in-vitro study. J Clin Exp Dent. 2022;14(5):e413-9.

doi:10.4317/jced.59548

https://doi.org/10.4317/jced.59548

___________

References

1. Mörmann WH, Brandestini M, Lutz F, Barbakow F. Chairside computer-aided direct ceramic inlays. Quintessence Int. 1989;20:329-39. PMid:2756089

2. Ruse ND, Sadoun MJ. Resin-composite blocks for dental CAD/CAM applications. J Dent Res. 2014;93:1232-4. https://doi.org/10.1177/0022034514553976 PMid:25344335 PMCid:PMC4462808

3. Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: Current status and future perspectives from 20 years of experience. Dent Mater J. 2009;28:44-56. https://doi.org/10.4012/dmj.28.44 PMid:19280967

4. Barizon KTL, Bergeron C, Vargas MA, Qian F, Cobb DS, Gratton DG, et al. Ceramic materials for porcelain veneers: Part II. Effect of material, shade, and thickness on translucency. J Prosthet Dent. 2014;112:864-70. https://doi.org/10.1016/j.prosdent.2014.05.016 PMid:24969410

5. Tsitrou EA, Northeast SE, van Noort R. Brittleness index of machinable dental materials and its relation to the marginal chipping factor. J Dent. 2007;35:897-902. https://doi.org/10.1016/j.jdent.2007.07.002 PMid:17977638

6. Lebon N, Tapie L, Vennat E, Mawussi B. Influence of CAD/CAM tool and material on tool wear and roughness of dental prostheses after milling. J Prosthet Dent. 2015;114:236-47. https://doi.org/10.1016/j.prosdent.2014.12.021 PMid:25957240

7. Nandini S. Indirect resin composites. J Conserv Dent. 2010;13:184. https://doi.org/10.4103/0972-0707.73377 PMid:21217945 PMCid:PMC3010022

8. Drummond JL, Lin L, Al-Turki LA, Hurley RK. Fatigue behaviour of dental composite materials. J Dent. 2009;37:321-30. https://doi.org/10.1016/j.jdent.2008.12.008 PMid:19181429

9. Nguyen JF, Ruse D, Phan AC, Sadoun MJ. High-temperature-pressure polymerized resin-infiltrated ceramic networks. J Dent Res. 2014;93:62-7. https://doi.org/10.1177/0022034513511972 PMid:24186559 PMCid:PMC3872849

10. Lawson NC, Bansal R, Burgess JO. Wear, strength, modulus and hardness of CAD/CAM restorative materials. Dent Mater. 2016;32:e275-83. https://doi.org/10.1016/j.dental.2016.08.222 PMid:27639808

11. Mainjot AK, Dupont NM, Oudkerk JC, Dewael TY, Sadoun MJ. From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites. J Dent Res. 2016;95:487-95. https://doi.org/10.1177/0022034516634286 PMid:26933136

12. Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater. 2014;30:564-9. https://doi.org/10.1016/j.dental.2014.02.019 PMid:24656471 PMCid:PMC4651623

13. Lauvahutanon S, Takahashi H, Shiozawa M, Iwasaki N, Asakawa Y, Oki M, et al. Mechanical properties of composite resin blocks for CAD/CAM. Dent Mater J. 2014;33:705-10. https://doi.org/10.4012/dmj.2014-208 PMid:25273052

14. Chung SM, Yap AUJ, Chandra SP, Lim CT. Flexural strength of dental composite restoratives: Comparison of biaxial and three-point bending test. J Biomed Mater Res - Part B Appl Biomater. 2004;71:278-83. https://doi.org/10.1002/jbm.b.30103 PMid:15386492

15.Wendler M, Belli R, Petschelt A, Mevec D, Harrer W, Lube T, et al. Chairside CAD/CAM materials. Part 2: Flexural strength testing. Dent Mater. 2017;33:99-109. https://doi.org/10.1016/j.dental.2016.10.008 PMid:27884403

16. Kim KH, Ong JL, Okuno O. The effect of filler loading and morphology on the mechanical properties of contemporary composites. J Prosthet Dent. 2002;87. https://doi.org/10.1067/mpr.2002.125179 PMid:12131887

17. Rastelli ANS, Jacomassi DP, Faloni APS, Queiroz TP, Rojas SS, Bernardi MIB, et al. The filler content of the dental composite resins and their influence on different properties. Microsc Res Tech. 2012;75:758-65. https://doi.org/10.1002/jemt.21122 PMid:22213178

18. Randolph LD, Palin WM, Leloup G, Leprince JG. Filler characteristics of modern dental resin composites and their influence on physico-mechanical properties. Dent Mater. 2016;32. https://doi.org/10.1016/j.dental.2016.08.210

19. Asmussen E, Peutzfeldt A. Influence of UEDMA, BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater. 1998;14:51-6. https://doi.org/10.1016/S0109-5641(98)00009-8 PMid:9972151

20. Drummond JL. Nanoindentation of dental composites. J Biomed Mater Res - Part B Appl Biomater. 2006;78:27-34. https://doi.org/10.1002/jbm.b.30442 PMid:16278844

21. Salerno M, Derchi G, Thorat S, Ceseracciu L, Ruffilli R, Barone AC. Surface morphology and mechanical properties of new-generation flowable resin composites for dental restoration. Dent Mater. 2011;27:1221-8. https://doi.org/10.1016/j.dental.2011.08.596 PMid:22000067

22. Hosseinalipour M, Javadpour J, Rezaie H, Dadras T, Hayati AN. Investigation of mechanical properties of experimental Bis-GMA/TEGDMA dental composite resins containing various mass fractions of silica nanoparticles. J Prosthodont. 2010;19:112-7. https://doi.org/10.1111/j.1532-849X.2009.00530.x PMid:19895426

23. Lee A, He LH, Lyons K, Swain M V. Tooth wear and wear investigations in dentistry. J Oral Rehabil. 2012;39:217-25. https://doi.org/10.1111/j.1365-2842.2011.02257.x PMid:21923888

24. Wendler M, Kaizer MR, Belli R, Lohbauer U, Zhang Y. Sliding contact wear and subsurface damage of CAD/CAM materials against zirconia. Dent Mater. 2020;36:387-401. https://doi.org/10.1016/j.dental.2020.01.015 PMid:32007314 PMCid:PMC7042091

25. Yildiz E, Sirin Karaarslan E, Simsek M, Ozsevik AS, Usumez A. Color stability and surface roughness of polished anterior restorative materials. Dent Mater J. 2015;34:629-39. https://doi.org/10.4012/dmj.2014-344 PMid:25925685

26. Banas JA, Drake DR. Are the mutans streptococci still considered relevant to understanding the microbial etiology of dental caries? BMC Oral Health .2018;18. https://doi.org/10.1186/s12903-018-0595-2 PMid:30064426 PMCid:PMC6069834

27. Song F, Koo H, Ren D. Effects of material properties on bacterial adhesion and biofilm formation. J Dent Res. 2015;94:1027-34. https://doi.org/10.1177/0022034515587690 PMid:26001706

28. Derchi G, Vano M, Barone A, Covani U, Diaspro A, Salerno M. Bacterial adhesion on direct and indirect dental restorative composite resins: An in vitro study on a natural biofilm. J Prosthet Dent. 2017;117:669-76. https://doi.org/10.1016/j.prosdent.2016.08.022 PMid:27881324

29. Cazzaniga G, Ottobelli M, Ionescu A, Garcia-Godoy F, Brambilla E. Surface properties of resin-based composite materials and biofilm formation: A review of the current literature. Am J Dent. 2015;28:311-20. PMid:26846036

30. Ismail HS, Ali AI, El-Ella MAA, Mahmoud SH. Effect of different polishing techniques on surface roughness and bacterial adhesion of three glass ionomer-based restorative materials: In vitro study. J Clin Exp Dent. 2020;12:e620-5. https://doi.org/10.4317/jced.56616 PMid:32905005 PMCid:PMC7462382

31. Ionescu A, Brambilla E, Wastl DS, Giessibl FJ, Cazzaniga G, Schneider-Feyrer S, et al. Influence of matrix and filler fraction on biofilm formation on the surface of experimental resin-based composites. J Mater Sci Mater Med 2015;26. https://doi.org/10.1007/s10856-014-5372-4 PMid:25604698

32. Kawai K, Tsuchitani Y. Effects of resin composite components on glucosyltransferase of cariogenicbacterium. J Biomed Mater Res. 2000;51:123-7. https://doi.org/10.1002/(SICI)1097-4636(200007)51:1<123::AID-JBM16>3.0.CO;2-7 PMid:10813753

33. Hansel C, Leyhausen G, Mai UEH, Geurtsen W. Effects of various resin composite (Co)monomers and extracts on two caries-associated micro-organisms in vitro. J Dent Res. 1998;77:60-7. https://doi.org/10.1177/00220345980770010601 PMid:9437400

34. Ionescu A, Wutscher E, Brambilla E, Schneider-Feyrer S, Giessibl FJ, Hahnel S. Influence of surface properties of resin-based composites on in vitro Streptococcus mutans biofilm development. Eur J Oral Sci. 2012;120:458-65. https://doi.org/10.1111/j.1600-0722.2012.00983.x PMid:22985005

35. Ionescu AC, Hahnel S, König A, Brambilla E. Resin composite blocks for dental CAD/CAM applications reduce biofilm formation in vitro. Dent Mater. 2020;36:603-16. https://doi.org/10.1016/j.dental.2020.03.016 PMid:32238271