Adams KR, Savett DA, Lien W, Raimondi C. Evaluation of a Novel “Quad” Wavelength Light Curing Unit. J Clin Exp Dent. 2022;14(10):e815-21.

 

doi:10.4317/jced.59825

https://doi.org/10.4317/jced.59825

___________

 

References

1. Santini A, Turner S. General dental practitioners' knowledge of polymerisation of resin-based composite restorations and light curing unit technology. Br Dent J. 2011;211:E13.
https://doi.org/10.1038/sj.bdj.2011.768
PMid:21941302

 

2. Halvorson RH, Erickson RL, Davidson CL. Energy dependent polymerization of resin-based composite. Dent Mater. 2002;18:463-469.
https://doi.org/10.1016/S0109-5641(01)00069-0

PMid:12098575

 

3. Price RB, Ferracane JL, Shortall AC. Light-curing units: a review of what we need to know. J Dent Res. 2015;94:1179-1186.
https://doi.org/10.1177/0022034515594786
PMid:26156516

 

4. Rueggeberg FA. State-of-the-art: dental photocuring-a review. Dent Mater. 2011;27:39-52.
https://doi.org/10.1016/j.dental.2010.10.021
PMid:21122903

 

5. Peutzfeldt A, Asmussen E. Resin composite properties and energy density of light cure. J Dent Res. 2005;84:659-662.
https://doi.org/10.1177/154405910508400715
PMid:15972597

 

6. Price RB, Shortall AC, Palin WM. Contemporary issues in light curing. Oper Dent. 2014;39:4-14.
https://doi.org/10.2341/13-067-LIT
PMid:23786585

 

7. Stansbury JW. Curing dental resins and composites by photopolymerization. J Esthet Dent. 2000;12:300-308.
https://doi.org/10.1111/j.1708-8240.2000.tb00239.x
PMid:14743525

 

8. Gomes M, DeVito-Moraes A, Francci C, Moraes R, Pereira T, Froes-Salgado N, et al. Temperature increase at the light guide tip of 15 contemporary LED units and thermal variation at the pulpal floor of cavities: an infrared thermographic analysis. Oper Dent. 2013;38:324-333.
https://doi.org/10.2341/12-060-L
PMid:23092145

 

9. Shimokawa C, Sullivan B, Turbino ML, Soares CJ, Price RB. Influence of emission spectrum and irradiance on light curing of resin-based composites. Oper Dent. 2017;42:537-547.
https://doi.org/10.2341/16-349-L
PMid:28581917

 

10. Santini A, Gallegos IT, Felix CM. Photoinitiators in dentistry: a review. Prim Dent J. 2013;2:30-33.
https://doi.org/10.1308/205016814809859563
PMid:24466621

 

11. Ilie N, Hickel R. Can CQ be completely replaced by alternative initiators in dental adhesives? Dent Mater J. 2008;27:221-228.
https://doi.org/10.4012/dmj.27.221
PMid:18540396

 

12. Pink Wave Pink Differently. https://vistaapex.com/pinkwave. Accessed 18 Aug 2020.

 

13. Valo Grand. https://www.ultradent.com/products/categories/equipment/curing-lights/valo-grand. Accessed 2 June 2022.

 

14. ISO 4049, Dentistry Polymer-based filling, Restorative Materials, International Standards Office, Geneva, Switzerland, 2019.

 

15. Price RB, Ferracane JL, Hickel R, Sullivan B. The light-curing unit: an essential piece of dental equipment. Int Dent J. 2020;70:407-417.
https://doi.org/10.1111/idj.12582
PMid:32696512 PMCid:PMC9379154

 

16. Kowalska A, Sokolowski J, Bociong K. The photoinitiators esed in resin based dental composite - a review and future perspectives. Polymers (Basel). 2021;2;13:470.
https://doi.org/10.3390/polym13030470
PMid:33540697 PMCid:PMC7867280

 

17. Zarpellon DC, Runnacles P, Maucoski C, Gross DJ, Coelho U, Rueggeberg FA, et al. Influence of Class V preparation on in vivo temperature rise in anesthetized human pulp during exposure to a Polywave® LED light curing unit. Dent Mater. 2018;34:901-909.
https://doi.org/10.1016/j.dental.2018.03.003
PMid:29606368

 

18. Runnacles P, Arrais CA, Pochapski MT, Dos Santos FA, Coelho U, Gomes JC, et al. In vivo temperature rise in anesthetized human pulp during exposure to a polywave LED light curing unit. Dent Mater. 2015;31:505-513.
https://doi.org/10.1016/j.dental.2015.02.001
PMid:25711700