Rizzante F,
Bueno T, Guimarães G, Moura G, Teich S, Furuse A, Mendonça G. Comparative
physical and mechanical properties of a 3D printed temporary crown and bridge
restorative material. J Clin Exp Dent. 2023;15(6):e464-9.
doi:10.4317/jced.60507
https://doi.org/10.4317/jced.60507
__________
References
|
1.
Yao J, Li J, Wang Y, Huang H. Comparison of the flexural strength and
marginal accuracy of traditional and CAD/CAM interim materials before and
after thermal cycling. J Prosthet Dent. 2014;112:649-57. |
|
|
|
|
|
2.
Jain S, Sayed ME, Shetty M, Alqahtani SM, Al Wadei MHD, Gupta SG, et al.
Physical and Mechanical Properties of 3D-Printed Provisional Crowns and Fixed
Dental Prosthesis Resins Compared to CAD/CAM Milled and Conventional
Provisional Resins: A Systematic Review and Meta-Analysis. Polymers (Basel).
2022;14:2691. |
|
|
|
|
|
3.
Mazurek-Popczyk J, Nowicki A, Arkusz K, Pałka Ł, Zimoch-Korzycka A,
Baldy-Chudzik K. Evaluation of biofilm formation on acrylic resins used to
fabricate dental temporary restorations with the use of 3D printing technology.
BMC Oral Health. 2022;22:442. |
|
|
|
|
|
4.
Huettig F, Kustermann A, Kuscu E, Geis-Gerstorfer J, Spintzyk S.
Polishability and wear resistance of splint material for oral appliances
produced with conventional, subtractive, and additive manufacturing. J Mech
Behav Biomed Mater. 2017;75:175-9. |
|
|
|
|
|
5.
Altarazi A, Haider J, Alhotan A, Silikas N, Devlin H. Assessing the physical
and mechanical properties of 3D printed acrylic material for denture base
application. Dent Mater. 2022;38:1841-54. |
|
|
|
|
|
6.
Lin CH, Lin YM, Lai YL, Lee SY. Mechanical properties, accuracy, and
cytotoxicity of UV-polymerized 3D printing resins composed of BisEMA, UDMA,
and TEGDMA. J Prosthet Dent. 2020;123:349-354. |
|
|
|
|
|
7.
Tahayeri A, Morgan M, Fugolin AP, Bompolaki D, Athirasala A, Pfeifer CS, et
al. 3D printed versus conventionally cured provisional crown and bridge
dental materials. Dental materials : official publication of the Academy of
Dental Materials. 2018;34:192-200. |
|
|
|
|
|
8.
Park JM, Ahn JS, Cha HS, Lee JH. Wear Resistance of 3D Printing Resin
Material Opposing Zirconia and Metal Antagonists. Materials (Basel). 2018;11:1043. |
|
|
|
|
|
9.
Revilla-Leon M, Ozcan M. Additive Manufacturing Technologies Used for
Processing Polymers: Current Status and Potential Application in Prosthetic
Dentistry. J Prosthodont. 2019;28:146-58. |
|
|
|
|
|
10.
Shenoy A, Rajaraman V, Maiti S. Comparative analysis of various temporary
computer-aided design/computer-aided manufacturing polymethyl methacrylate
crown materials based on color stability, flexural strength, and surface
roughness: An in vitro study. J Adv Pharm Technol Res. 2022;13:S130-s5. PMid:36643153
PMCid:PMC9836163 |
|
|
|
|
|
11.
Goodacre BJ, Goodacre CJ. Additive Manufacturing for Complete Denture
Fabrication: A Narrative Review. J Prosthodont. 2022;31:47-51. |
|
|
|
|
|
12.
Cattoni F, Tete G, Calloni AM, Manazza F, Gastaldi G, Cappare P. Milled
versus moulded mock-ups based on the superimposition of 3D meshes from
digital oral impressions: a comparative in vitro study in the aesthetic area.
BMC Oral Health. 2019;19:230. |
|
|
|
|
|
13.
Crenn MJ, Rohman G, Fromentin O, Benoit A. Polylactic acid as a biocompatible
polymer for three-dimensional printing of interim prosthesis: Mechanical characterization.
Dent Mater J. 2022;41:110-6. |
|
|
|
|
|
14.
Furuse AY, Santana LOC, Rizzante FAP, Ishikiriama SK, Bombonatti JF, Correr
GM, et al. Delayed Light Activation Improves Color Stability of Dual-Cured
Resin Cements. J Prosthodont. 2018;27:449-55. |
|
|
|
|
|
15.
Rizzante FAP, Locatelli PM, Porto TS, Borges AFS, Mondelli RFL, Ishikiriama
SK. Physico-mechanical properties of resin cement light cured through
different ceramic spacers. J Mech Behav Biomed Mater. 2018;85:170-4. |
|
|
|
|
|
16.
Ishikiriama SK, Ordonez-Aguilera JF, Maenosono RM, Volu FL, Mondelli RF.
Surface roughness and wear of resin cements after toothbrush abrasion. Braz
Oral Res. 2015;29:1-5. PMid:25466330 |
|
|
|
|
|
17.
Reeponmaha T, Angwaravong O, Angwarawong T. Comparison of fracture strength
after thermo-mechanical aging between provisional crowns made with CAD/CAM
and conventional method. J Adv Prosthodont. 2020;12:218-24. |
|
|
|
|
|
18.
Myagmar G, Lee JH, Ahn JS, Yeo IL, Yoon HI, Han JS. Wear of 3D printed and
CAD/CAM milled interim resin materials after chewing simulation. J Adv
Prosthodont. 2021;13:144-51. |
|
|
|
|
|
19.
Heintze SD, Forjanic M. Surface roughness of different dental materials
before and after simulated toothbrushing in vitro. Oper Dent. 2005;30:617-26. PMid:16268397 |
|
|
|
|
|
20.
Atria PJ, Lagos I, Sampaio CS. In vitro evaluation of surface roughness,
color stability, and color masking of provisional restoration materials for
veneers and crowns. Int J Comput Dent. 2020;23:343-50. PMid:33491930 |
|
|
|
|
|
21.
Taşın S, Ismatullaev A, Usumez A. Comparison of surface roughness and color
stainability of 3-dimensionally printed interim prosthodontic material with
conventionally fabricated and CAD-CAM milled materials. J Prosthet Dent.
2022;128:1094-101. |
|
|
|
|
|
22.
Yao Q, Morton D, Eckert GJ, Lin WS. The effect of surface treatments on the
color stability of CAD-CAM interim fixed dental prostheses. J Prosthet Dent.
2021;126:248-53. |
|
|
|
|
|
23.
Murat S, Alp G, Alatalı C, Uzun M. In Vitro Evaluation of Adhesion of Candida
albicans on CAD/CAM PMMA-Based Polymers. J Prosthodont. 2019;28:e873-e9. |
|
|
|
|
|
24.
Song SY, Shin YH, Lee JY, Shin SW. Color stability of provisional restorative
materials with different fabrication methods. J Adv Prosthodont. 2020;12:259-64. |
|
|
|
|
|
25.
Shin JW, Kim JE, Choi YJ, Shin SH, Nam NE, Shim JS, et al. Evaluation of the
Color Stability of 3D-Printed Crown and Bridge Materials against Various
Sources of Discoloration: An In Vitro Study. Materials (Basel). 2020;13:5359. |
|