Medina-Sotomayor P, Ortega G, Aguilar J, Ordóñez P, Rojas M, Vásquez R. Edental restoration operative time and analysis of the internal gap of conventional resins (Incremental Technique) vs. Bulk Fill (Single-Increment Technique): In vitro study. J Clin Exp Dent. 2023;15(8):e621-8.

doi:10.4317/jced.60717

_________

References

1. Martins LC, Oliveira LRS, Braga SSL, Soares CJ, Versluis A, Borges GA, et al. Effect of Composite Resin and Restorative Technique on Polymerization Shrinkage Stress, Cuspal Strain and Fracture Load of Weakened Premolars. J Adhes Dent. 2021;22:503-514.

2. Ajaj RA, Farsi NJ, Alzain L, Nuwaylati N, Ghurab R, Nassar HM. Dental bulk-fill resin composites polymerization efficiency: A systematic review and meta-analysis. J Compos Sci. 2021;5:149 https://doi.org/10.3390/jcs5060149

3. Duarte JCL, Costa AR, Veríssimo C, Duarte RW, Filho SC, Spohr AM, et al. Interfacial Stress and Bond Strength of Bulk-Fill or Conventional Composite Resins to Dentin in Class II Restorations. Braz Dent J. 2020;31:532-539. https://doi.org/10.1590/0103-6440202003338 PMid:33146338

4. Kruly PC, Giannini M, Pascotto RC, Tokubo LM, Suga USG, Marques ACR, et al. Meta-analysis of the clinical behavior of posterior direct resin restorations: Low polymerization shrinkage resin in comparison to methacrylate composite resin. PLOS ONE. 2018;13:e0191942. https://doi.org/10.1371/journal.pone.0191942 PMid:29466366 PMCid:PMC5842874

5. Aggarwal N, Jain A, Gupta H, Abrol A, Singh C, Rapgay T. The comparative evaluation of depth of cure of bulk-fill composites - An in vitro study. JCD. 2020;5:371-375. PMid:31802822 PMCid:PMC6873606

6. Alqudaihi FS, Cook NB, Diefenderfer KE, Bottino MC, Platt JA. Comparison of Internal Adaptation of Bulk-fill and Increment-fill Resin Composite Materials. Oper Dent. 2019;44:E32-E44. https://doi.org/10.2341/17-269-L PMid:29856698

7. Peskersoy C, Recen D, Kemaloğlu H. The effect of composite placement technique on the internal adaptation, gap formation and microshear bond strength. Eur Oral Res. 2022;56:10-16. PMid:35478705 PMCid:PMC9012222

8. Peutzfeldt A, Mühlebach S, Lussi A, Flury S. Marginal Gap Formation in Approximal "Bulk Fill" Resin Composite Restorations After Artificial Ageing. Oper Dent. 2018;43:180-189. https://doi.org/10.2341/17-068-L PMid:29148914

9. Pinto G, Prieto L, Pierote JJ, Ferraz L, Câmara JV, Aguiar FH. Effect of different adhesive strategies on the microtensile bond strength of dentin to indirect resin-based composite. J Clin Exp Dent. 2020;12:e1066-e1070. https://doi.org/10.4317/jced.57094 PMid:33262873 PMCid:PMC7680574

10. Zotti F, Falavigna E, Capocasale G, De Santis D, Albanese M. Microleakage of Direct Restorations-Comparisonbetween Bulk-Fill and Traditional Composite Resins: Systematic Review and Meta-Analysis. Eur J Dent. 2021;15:755-767. https://doi.org/10.1055/s-0041-1724155 PMid:34450679 PMCid:PMC8630972

11. Radwa A, Ahmed H. Fracture resistance of mod cavities in maxillary premolar teeth restored with different restorative protocols: an in-vitro study. E.D.J. 2022;68:1907:1916. https://doi.org/10.21608/edj.2022.115126.1941

12. Iwasaki T, Kamiya N, Hirayama S, Tanimoto Y. Evaluation of the mechanical behavior of bulk-fill and conventional flowable resin composites using dynamic micro-indentation. Dent Mater J. 2022;41(1):87-94. https://doi.org/10.4012/dmj.2021-116 PMid:34471041

13. Soto-Montero J, Giannini M, Sebold M, de Castro EF, Abreu JLB, Hirata R. Comparison of the operative time and presence of voids of incremental and bulk-filling techniques on Class II composite restorations. Quintessence Int. 2022;53:200-208. PMid:34709774

14. Duarte JCL, Costa AR, Veríssimo C, Duarte RW, Filho SC, Spohr AM, et al. Interfacial Stress and Bond Strength of Bulk-Fill or Conventional Composite Resins to Dentin in Class II Restorations. Braz Dent J. 2020;31:532-539. https://doi.org/10.1590/0103-6440202003338 PMid:33146338

15. Han SH, Park SH. Incremental and Bulk-fill Techniques With Bulk-fill Resin Composite in Different Cavity Configurations. Oper Dent. 2018;43:631-641 https://doi.org/10.2341/17-279-LR PMid:29630486

16. Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent. 1999;27:89-99 https://doi.org/10.1016/S0300-5712(98)00037-2 PMid:10071465

17. Cayo-Rojas CF, Hernández-Caba KK, Aliaga-Mariñas AS, Ladera-Castañeda MI, Cervantes-Ganoza LA, et al. Microleakage in class II restorations of two bulk fill resin composites and a conventional nanohybrid resin composite: an in vitro study at 10,000 thermocycles. BMC oral health. 2021;21:619. https://doi.org/10.1186/s12903-021-01942-0 PMid:34861859 PMCid:PMC8642901

18. Liu J, Zhang H, Sun H, Liu Y, Liu W, Su B, et al. The Development of Filler Morphology in Dental Resin Composites: A Review." Materials (Basel, Switzerland). Materials (Basel). 2021;14:5612 https://doi.org/10.3390/ma14195612 PMid:34640020 PMCid:PMC8509641

19. Rachmia J, Fauziyah S. Dental Composite Resin: A Review. AIP Conf.Proc. 2019;:2193.

20. Gamarra VSS, Borges GA, Júnior LHB, Spohr AM. Marginal adaptation and microleakage of a bulk-fill composite resin photopolymerized with different techniques. Odontology. 2018;106:56-63. https://doi.org/10.1007/s10266-017-0294-5 PMid:28160094

21. Papagiannoulis L, Kakaboura A, Eliades G. In vivo vs in vitro anticariogenic behavior of glass-ionomer and resin composite restorative materials. Dent Mater. 2002;18:561-9. https://doi.org/10.1016/S0109-5641(01)00090-2 PMid:12385896

22. Thomas RZ, Ruben JL, ten Bosch JJ, Fidler V, Huysmans MC. Approximal secondary caries lesion progression, a 20-week in situ study. Caries Res 2007;41:399-405. https://doi.org/10.1159/000104799 PMid:17713341

23. Guéders AM, Charpentier JF, Albert AI, Geerts SO. Microleakage After Thermocycling of 4 Etch and Rinse and 3 Self-etch Adhesives with and Without a Flowable Composite Lining. Oper Dent 2006;31:450-455. https://doi.org/10.2341/05-55 PMid:16924985

24. Hayashi J, Espigares J, Takagaki T, Shimada Y, Tagami J, Numata T, et al. Real-time in-depth imaging of gap formation in bulk-fill resin composites. Dental materials: official publication of the Academy of Dental Materials. 2019;35(4):585-596. https://doi.org/10.1016/j.dental.2019.01.020 PMid:30819550

25. Alsagob E, Bardwell D, Ali A, Dhayat S, Stark P. Comparison of microleakage between bulk-fill flowable and nanofilled resin-based composites. Interventional medicine & applied science. 2018;10:102-109. https://doi.org/10.1556/1646.10.2018.07 PMid:30363354 PMCid:PMC6167621

26. Poggio C, Chiesa M, Scribante A, Mekler J, Colombo M. Microleakage in Class II composite restorations with margins below the CEJ: In vitro evaluation of different restorative techniques. Med Oral Patol Oral Cir Bucal. 2013;1:793-8. https://doi.org/10.4317/medoral.18344 PMid:23722121 PMCid:PMC3790654

27. Benetti AR, Havndrup-Pedersen C, Honoré C, Pedersen MK, Pallesen U. Bulk-fill resin composites: polymerization contraction, depth of cure, and gap formation Oper Dent. 2015;40:190-200. https://doi.org/10.2341/13-324-L PMid:25216940

28. Han SH, Sadr A, Shimada Y, Tagami J, Park SH. Adaptation Internal of composite restorations with or without intermediate an layer effect of polymerization shrinkage parameters of the layer material. JDent. 2019;80:41-8. https://doi.org/10.1016/j.jdent.2018.10.013 PMid:30391684

29. Breschi L, Maravic T, Comba A, Cunha SR, Loguercio AD, Reis A, et al. Chlorhexidine preserves the hybrid layer in vitro after 10-years aging. Dent Mater. 2020;36:672-680. https://doi.org/10.1016/j.dental.2020.03.009 PMid:32284197

30. Tosco V, Vitiello F, Furlani M, Gatto ML, Monterubbianesi R, Giuliani A, et al. Microleakage analysis of Different Bulk-Filling Techniques for Class II Restorations: CT, SEM and EDS Evaluations. Materials. 2021;14:31. https://doi.org/10.3390/ma14010031 PMid:33374708 PMCid:PMC7793523

31. Tran XV, Quang K.Microleakage and characteristics of resin-tooth tissues interface of a self-etch and an etch-and-rinse adhesive systems." Restorative dentistry & endodontics. 2021;46:30. https://doi.org/10.5395/rde.2021.46.e30 PMid:34123766 PMCid:PMC8170381