Calvo-Guirado JL, Maté-Sánchez JE, Delgado-Ruiz R,
Ramírez-Fernández MP. Calculation of bone graft volume using 3D
reconstruction system. Med Oral Patol
Oral Cir Bucal. 2011 Mar 1;16
(2):e260-4.
doi:10.4317/medoral.16.e260
1. Lal K, White GS, Morea DN, Wright
RF. Use of stereolithographic templates for surgical
and prosthodontic implant planning and placement.
Part I. The concept. J Prosthodont. 2006;15:51-8.
doi:10.1111/j.1532-849X.2006.00069.x
PMid:16433652
2. Curcio R, Perin GL, Chilvarquer I, Borri ML, Ajzen S. Use of models in surgical predictability of oral
rehabilitations. Acta Cir Bras. 2007;22:387-95.
doi:10.1590/S0102-86502007000500011
PMid:17923960
3. Bouyssié JF, Bouyssié S,
Sharrock P, Duran D. Stereolithographic
models derived from x-ray computed tomography. Reproduction
accuracy. Surg Radiol
Anat. 1997;19:193-9.
4. Barker TM, Earwaker WJ, Frost N, Wakeley G. Integration of 3-D medical imaging and rapid
prototyping to create stereolithographic models. Australas Phys
Eng Sci Med.
1993;16:79-85.
PMid:8357307
5. Arias-Irimia O, Barona-Dorado C,
Martínez-Rodríguez N, Ortega-Aranegui R,
Martínez-González JM. Pre-operative evaluation of the volume of bone graft in sinus lifts by
means of CompuDent. Med
Oral Patol Oral Cir Bucal. 2010;15:e512-6.
doi:10.4317/medoral.15.e512
6. D’Urso PS, Barker TM, Earwaker WJ, Bruce LJ, Atkinson
RL, Lanigan MW, et al. Stereolithographic biomodelling
in cranio-maxillofacial surgery: a prospective trial.
J Craniomaxillofac Surg. 1999;27:30-7.
doi:10.1016/S1010-5182(99)80007-9
7. Lohfeld S, Barron V, McHugh PE. Biomodels of bone: a review. Ann Biomed Eng. 2005;33:1295-311.
doi:10.1007/s10439-005-5873-x
PMid:16240079
8. Izatt MT, Thorpe PL, Thompson RG, D’Urso PS, Adam CJ, Earwaker JW,
et al. The use of physical biomodelling
in complex spinal surgery. Eur Spine J. 2007;16:1507-18.
doi:10.1007/s00586-006-0289-3
PMid:17846803 PMCid:2200746
9. Spencer KR, Sizeland A, Taylor
GI, Wiesenfeld D. The use of titanium mandibular reconstruction plates in patients with oral
cancer. Int J Oral Maxillofac
Surg. 1999;28:288-90.
doi:10.1016/S0901-5027(99)80160-X
10. Gateno J, Xia J, Teichgraeber
JF, Rosen A, Hultgren B, Vadnais T. The precision of computer-generated surgical splints. J Oral
Maxillofac Surg. 2003;61:814-7.
doi:10.1016/S0278-2391(03)00240-4
11. Cunningham LL Jr, Madsen MJ, Peterson G. Stereolithographic modeling technology applied to tumor
resection. J Oral Maxillofac Surg. 2005;63:873-8.
doi:10.1016/j.joms.2005.02.027
PMid:15944992
12. Kernan
BT, Wimsatt JA 3rd. Use of a stereolithography
model for accurate, preoperative adaptation of a reconstruction plate. J
Oral Maxillofac Surg. 2000;58:349-51.
doi:10.1016/S0278-2391(00)90071-5
13. Erickson DM, Chance D, Schmitt S, Mathis J. An opinion
survey of reported benefits from the use of stereolithographic
models. J Oral Maxillofac Surg. 1999;57:1040-3.
doi:10.1016/S0278-2391(99)90322-1
14. Cohen A, Laviv A, Berman P, Nashef
R, Abu-Tair J. Mandibular
reconstruction using stereolithographic 3-dimensional
printing modeling technology. Oral Surg
Oral Med Oral Pathol Oral Radiol
Endod. 2009;108:661-6.
doi:10.1016/j.tripleo.2009.05.023
PMid:19716728
15. Singare S, Dichen L, Bingheng L, Yanpu L, Zhenyu G, Yaxiong L. Design and
fabrication of custom mandible titanium tray based on rapid prototyping. Med
Eng Phys. 2004;26:671-6.
doi:10.1016/j.medengphy.2004.06.001
16. Yi Z, Jian-Guo Z, Guang-Yan Y, Ling L,
Fu-Yun Z, Guo-Cheng Z.
Reconstruction plates to bridge mandibular defects: a
clinical and experimental investigation in biomechanical aspects. Int J Oral Maxillofac Surg. 1999;28:445-50.
doi:10.1016/S0901-5027(99)80058-7
17. Sannomiya EK, Silva JV, Brito
AA, Saez DM, Angelieri F, Dalben Gda S. Surgical planning
for resection of an ameloblastoma and reconstruction
of the mandible using a selective laser sintering 3D biomodel.
Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2008;106:e36-40.
doi:10.1016/j.tripleo.2008.01.014
PMid:18585610