Castillo-de Oyagüe R, Osorio R, Lynch C, Gilmour
A, Toledano M.. Effect of alloy type and
casting technique on the fracture strength of implant-cemented structures. Med
Oral Patol Oral Cir Bucal.
2011 Jul 1;16 (4):e619-25.
doi:10.4317/medoral.16.e619
http://dx.doi.org/doi:10.4317/medoral.16.e619
1. Cheng WW, Ju
CP, Lin JH. Structure, castability
and mechanical properties of commercially pure and alloyed titanium cast in graphi-te mould. J Oral Rehabil. 2007;34:528-40.
doi:10.1111/j.1365-2842.2003.01151.x
PMid:17559621
2. Oyagüe RC, Turrión AS, Toledano M, Monticelli F, Osorio
R. In vitro vertical misfit evaluation of cast frameworks for
cement-retained implant-supported partial prostheses. J Dent. 2009;37:52-8.
doi:10.1016/j.jdent.2008.09.007
PMid:18951675
3. Karl M, Taylor TD, Wichmann MG, Heckmann SM. In vivo stress
behavior in cemented and screw-retained five-unit implant FPDs. J Prosthodont. 2006;15:20-4.
doi:10.1111/j.1532-849X.2006.00064.x
PMid:16433647
4. Hjalmarsson L. On cobalt-chrome
frameworks in implant dentistry. Swed Dent J
Suppl. 2009;201:3-83.
PMid:20143574
5. Morris HF. Properties of cobalt-chromium metal ceramic alloys after heat
treatment. J Prosthet Dent.
1990;63:426-33.
doi:10.1016/0022-3913(90)90232-2
6. Leal MB, Paulino SM, Pagnano
VO, Bezzon OL. Influence of investment type and sprue number on the casting accuracy of titanium crown
margins. J Prosthet Dent. 2006;95:42-9.
doi:10.1016/j.prosdent.2005.11.004
PMid:16399274
7. Jang KS, Youn SJ, Kim YS.
Comparison of castability and
surface roughness of commercially pure titanium and cobalt-chromium denture
frameworks. J Prosthet Dent.
2001;86:93-8.
doi:10.1067/mpr.2001.116168
PMid:11458267
8. De Oliveira Correa G, Henriques GE, Mesquita MF, Sobrinho LC.
Over-refractory casting technique as an alternative to one-piece multi-unit
fixed partial denture frameworks. J Prosthet
Dent. 2006;95:243-8.
doi:10.1016/j.prosdent.2006.01.001
PMid:16543023
9. Hart CN, Wilson PR. Evaluation of welded titanium joints used with
cantilevered implant-supported prostheses. J Prosthet Dent. 2006;96:25-32.
doi:10.1016/j.prosdent.2006.05.003
PMid:16872927
10. Ulusoy M, Toksavul S.
Fracture resistance of five different metal framework designs for metal-ceramic
restorations. Int J Prosthodont.
2002;15:571-4.
PMid:12475164
11. Yildirim M, Fischer H, Marx R, Edelhoff D. In vivo fracture resistance
of implant-supported all-ceramic restorations. J Prosthet Dent. 2003;90:325-31.
doi:10.1016/S0022-3913(03)00514-6
12. Sabbagh J, Vreven J, Leloup G. Dynamic and static moduli
of elasticity of resin-based materials. Dent Mater. 2002;18:64-71.
doi:10.1016/S0109-5641(01)00021-5
13. Rho JY, Tsui TY, Pharr GM. Elastic properties of
human cortical and trabecular lamellar bone measured
by nanoindentation. Biomaterials.
1997;18:1325-30.
doi:10.1016/S0142-9612(97)00073-2
14. Kokubo Y, Tsumita M,
Sakurai S, Torizuka K, Vult
von Steyern P, Fukushima S. The effect of core
framework designs on the fracture loads of all-ceramic fixed partial dentures
on posterior implants. J Oral Rehabil.
2007;34:503-7.
doi:10.1111/j.1365-2842.2007.01751.x
PMid:17559618
15. Wictorin L, Julin P, Möllersten L. Roentgenological
detection of casting defects in cobalt-chromium alloy frameworks. J Oral Rehabil. 1979;6:137-46.
doi:10.1111/j.1365-2842.1979.tb01273.x
PMid:374696
16. Bessing C, Bergman M. The castability of unalloyed titanium in three different
casting machines. Swed Dent J. 1992;16:109-13.
PMid:1496457
17. Anusavice KJ, Kakar K, Ferree N. Which mechanical and physical testing methods are
relevant for predicting the clinical performance of ceramic-based dental
prostheses? Clin Oral Implants Res. 2007;18 Suppl 3:218-31.
doi:10.1111/j.1600-0501.2007.01460.x
PMid:17594384
18. Zarone F, Sorrentino R,
Traini T, Di lorio D, Caputi S. Fracture resistance of implant-supported screw-
versus cement-retained porcelain fused to metal single crowns: SEM fractographic analysis. Dent Mater. 2007;23:296-301.
doi:10.1016/j.dental.2005.10.013
PMid:16564081
19. Paulino SM, Leal MB, Pagnano
VO, Bezzon OL. The castability
of pure titanium compared with Ni-Cr and Ni-Cr-Be alloys. J Prosthet Dent. 2007;98:445-54.
doi:10.1016/S0022-3913(07)60143-7
20. Jacques LB, Moura MS, Suedam V, Souza EA, Rubo JH.
Effect of cantilever length and framework alloy on the stress
distribution of mandibular-cantilevered
implant-supported prostheses. Clin Oral Implants
Res. 2009;20:737-41.
doi:10.1111/j.1600-0501.2009.01712.x
PMid:19489929