Castillo-de-Oyagüe R, Sánchez-Turrión A, López-Lozano JF, Albaladejo A, Torres-Lagares D, Montero J, Suárez-García MJ. Vertical misfit of laser-sintered and vacuum-cast implant-supported crown copings luted with definitive and temporary luting agents. Med Oral Patol Oral Cir Bucal. 2012 Jul 1;17 (4):e610-7.

doi:10.4317/medoral.17997

http://dx.doi.org/doi:10.4317/medoral.17997

1. Sahin S, Cehreli MC. The significance of passive framework fit in implant prosthodontics: current status. Implant Dent. 2001;10:85-92.
http://dx.doi.org/10.1097/00008505-200104000-00003
PMid:11450418

2. Abt E. Growing body of evidence on survival rates of implant-supported fixed prostheses. Evid Based Dent. 2008;9:51-2.
http://dx.doi.org/10.1038/sj.ebd.6400584
PMid:18584006

3. Karl M, Winter W, Taylor TD, Heckmann SM. In vitro study on passive fit in implant-supported 5-unit fixed partial dentures. Int J Oral Maxillofac Implants. 2004;19:30-7.

4. Wataha JC. Alloys for prosthodontic restorations. J Prosthet Dent. 2002;87:351-63.
http://dx.doi.org/10.1067/mpr.2002.123817
PMid:12011845

5. Roach M. Base metal alloys used for dental restorations and implants. Dent Clin North Am. 2007;51:603-27.
http://dx.doi.org/10.1016/j.cden.2007.04.001
PMid:17586146

6. Ucar Y, Akova T, Akyil MS, Brantley WA. Internal fit evaluation of crowns prepared using a new dental crown fabrication technique: laser-sintered Co-Cr crowns. J Prosthet Dent. 2009;102:253-9.
http://dx.doi.org/10.1016/S0022-3913(09)60165-7

7. Akova T, Ucar Y, Tukay A, Balkaya MC, Brantley WA. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dent Mater. 2008;24:1400-4.
http://dx.doi.org/10.1016/j.dental.2008.03.001
PMid:18417202

8. Oyagüe RC, Turrión AS, Toledano M, Monticelli F, Osorio R. In vitro vertical misfit evaluation of cast frameworks for cement-retained implant-supported partial prostheses. J Dent. 2009;37:52-8.
http://dx.doi.org/10.1016/j.jdent.2008.09.007
PMid:18951675

9. Jang KS, Youn SJ, Kim YS. Comparison of castability and surface roughness of commercially pure titanium and cobalt-chromium denture frameworks. J Prosthet Dent. 2001;86:93-8.
http://dx.doi.org/10.1067/mpr.2001.116168
PMid:11458267

10. Quante K, Ludwig K, Kern M. Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology. Dent Mater. 2008;24:1311-5.
http://dx.doi.org/10.1016/j.dental.2008.02.011
PMid:18384869

11. Örtorp A, Jönsson D, Mouhsen A, Vult von Steyern P. The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study. Dent Mater. 2011;27:356-63.
http://dx.doi.org/10.1016/j.dental.2010.11.015
PMid:21163516

12. Sorensen JA. A standardized method for determination of crown margin fidelity. J Prosthet Dent. 1990;64:18-24.
http://dx.doi.org/10.1016/0022-3913(90)90147-5

13. Pan YH, Ramp LC, Lin CK, Liu PR. Retention and leakage of implant-supported restorations luted with provisional cement: a pilot study. J Oral Rehabil. 2007;34:206-12.
http://dx.doi.org/10.1111/j.1365-2842.2006.01673.x
PMid:17302949

14. Guichet DL, Caputo AA, Choi H, Sorensen JA. Passivity of fit and marginal opening in screw- or cement-retained implant fixed partial denture designs. Int J Oral Maxillofac Implants. 2000;15:239-46.
PMid:10795456

15. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater. 2004;20:963-71.
http://dx.doi.org/10.1016/j.dental.2004.03.002
PMid:15501325

16. Yoshida K, Tsuo Y, Meng X, Atsuta M. Mechanical properties of dual-cured resin luting agents for ceramic restoration. J Prosthodont. 2007;16:370-6.
http://dx.doi.org/10.1111/j.1532-849X.2007.00221.x
PMid:17672836

17. Bedi A, Michalakis KX, Hirayama H, Stark PC. The effect of different investment techniques on the surface roughness and irregularities of gold-palladium alloy castings. J Prosthet Dent. 2008;99:282-6.
http://dx.doi.org/10.1016/S0022-3913(08)60062-1

18. Rodrigues RC, Faria AC, Orsi IA, Mattos Mda G, Macedo AP, Ribeiro RF. Comparative study of two commercially pure titanium casting methods. J Appl Oral Sci. 2010;18:487-92.
http://dx.doi.org/10.1590/S1678-77572010000500010
PMid:21085805

19. Eliopoulos D, Zinelis S, Papadopoulos T. Porosity of cpTi casting with four different casting machines. J Prosthet Dent. 2004;92:377-81.
http://dx.doi.org/10.1016/j.prosdent.2004.07.006
PMid:15507912

20. Jemt T. Three-dimensional distortion of gold-alloy castings and welded titanium frameworks. Measurements of the precision of fit between completed implant prostheses and the master casts in routine edentulous situations. J Oral Rehabil. 1995;22:557-64.
http://dx.doi.org/10.1111/j.1365-2842.1995.tb01049.x
PMid:7472725

21. Lombardas P, Carbunaru A, McAlarney ME, Toothaker RW. Dimensional accuracy of castings produced with ringless and metal ring investment systems. J Prosthet Dent. 2000;84:27-31.
http://dx.doi.org/10.1067/mpr.2000.107783
PMid:10898838

22. Keith SE, Miller BH, Woody RD, Higginbottom FL. Marginal discrepancy of screw-retained and cemented metal-ceramic crowns on implants abutments. Int J Oral Maxillofac Implants. 1999;14:369-78.
PMid:10379110

23. Gonzalo E, Suárez MJ, Serrano B, Lozano JF. A comparison of the marginal vertical discrepancies of zirconium and metal ceramic posterior fixed dental prostheses before and after cementation. J Prosthet Dent. 2009;102:378-84.
http://dx.doi.org/10.1016/S0022-3913(09)60198-0

24. Holmes JR, Bayne SC, Holland GA, Sulik WD. Considerations in measurement of marginal fit. J Prosthet Dent. 1989;62:405-8.
http://dx.doi.org/10.1016/0022-3913(89)90170-4

25. Schneider R, de Goes MF, Henriques GE, Chan DC. Tensile bond strength of dual curing resin-based cements to commercially pure titanium. Dent Mater. 2007;23:81-7.
http://dx.doi.org/10.1016/j.dental.2005.12.006
PMid:16442156

26. Calderini A, Maiorana C, Garlini G, Abbondanza T. A simplified method to assess precision of fit between framework and supporting implants: a preliminary study. Int J Oral Maxillofac Implants. 2007;22:831-8.
PMid:17974120

27. Bottino MA, Valandro LF, Buso L, Ozcan M. The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns. Quintessence Int. 2007;38:425-32.

28. Xie D, Brantley WA, Culbertson BM, Wang G. Mechanical properties and microstructures of glass-ionomer cements. Dent Mater. 2000;16:129-38.
http://dx.doi.org/10.1016/S0109-5641(99)00093-7

29. White SN, Yu Z, Kipnis V. Effect of seating force on film thickness of new adhesive luting agents. J Prosthet Dent. 1992;68:476-81.
http://dx.doi.org/10.1016/0022-3913(92)90414-6

30. Jemt T. Failures and complications in 391 consecutively inserted fixed prostheses supported by Branemark implants in edentulous jaws: a study of treatment from the time of prosthesis placement to the first annual checkup. Int J Oral Maxillofac Implants. 1991;6:270-6.
PMid:1813395