Pellicer-Chover H, Pe–arrocha-Oltra D, Aloy-Prosper A, Sanchis-Gonzalez JC, Pe–arrocha-Diago MA, Pe–arrocha-Diago M. Comparison of peri-implant bone loss between conventional drilling with irrigation versus low-speed drilling without irrigation. Med Oral Patol Oral Cir Bucal. 2017 Nov 1;22 (6):e730-6.  

 

 

doi:10.4317/medoral.21694

http://dx.doi.org/doi:10.4317/medoral.21694

 

 

1. Augustin G, Davila S, Mihoci K, Udiljak T, Vedrina DS, Antabak A. Thermal osteonecrosis and bone drilling parameters revisited. Archives of Orthopaedic and Trauma Surgery. 2008;128:71-7.
https://doi.org/10.1007/s00402-007-0427-3

 

2. Misir AF, Sumer M, Yenisey M, Ergioglu E. Effect of surgical drill guide on heat generated from implant drilling. J Oral Maxillofac Surg. 2009;67:2663-8.
https://doi.org/10.1016/j.joms.2009.07.056

 

3. Scarano A, Piattelli A, Assenza B, Carinci F, Di Donato L, Romani GL. Infrared thermographic evaluation of temperature modifications induced during implant site preparation with cylindrical versus conical drills. Clin Implant Dent Relat Res. 2011;13:319-23.
https://doi.org/10.1111/j.1708-8208.2009.00209.x

 

4. Stelzle F, Frenkel C, Riemann M, Knipfer C, Stockmann P, Nkenke E. The effect of load on heat production, thermal effects and expenditure of time during implant site preparation – an experimental ex vivo comparison between piezosurgery and conventional drilling. Clin Oral Implants Res 2014;25:40-8.
https://doi.org/10.1111/clr.12077

 

5. Benington IC, Biagioni PA, Briggs J, Sheridan S, Lamey PJ. Thermal changes observed at implant sites during internal and external irrigation. Clin Oral Implants Res. 2002;13:293-7.
https://doi.org/10.1034/j.1600-0501.2002.130309.x

 

6. Marković A, Mišić T, Miličić B, Calvo-Guirado JL, Aleksić Z, Ðinić A. Heat generation during implant placement in low-density bone: effect of surgical technique, insertion torque and implant macro design. Clin Oral Implants Res. 2013;24:798-805.
https://doi.org/10.1111/j.1600-0501.2012.02460.x

 

7. Eriksson AR, Albrektsson T. Temperature threshold levels for heat-induced bone tissue injury: a vital-microscopic study in the rabbit. The Journal of Prosthetic Dentistry. 1983;50:101-7.
https://doi.org/10.1016/0022-3913(83)90174-9

 

8. Delgado-Ruiz RA, Sacks D, Palermo A, Calvo-Guirado JL, Perez-Albacete C, Romanos GE. Temperature and time variations during osteotomies performed with different piezosurgical devices: an in vitro study. Clin Oral Implants Res. 2016;27:1137-43.
https://doi.org/10.1111/clr.12709

 

9. Scarano A, Carinci F, Quaranta A, Di Iorio D, Assenza B, Piattelli A. Effects of bur wear during implant site preparation: an in vitro study. Int J Immunopathol Pharmacol. 2007;20:23-6.
https://doi.org/10.1177/039463200702001s06

 

10. Oliveira N, Alaejos-Algarra F, Mareque-Bueno J, FerrŽs-Padr— E, Hern‡ndez-Alfaro F. Thermal changes and drill wear in bovine bone during implant site preparation. A comparative in vitro study: twisted stainless steel and ceramic drills. Clin Oral Implants Res. 2012;23:963-9.
https://doi.org/10.1111/j.1600-0501.2011.02248.x

 

11. Strbac GD, Unger E, Donner R, Bijak M, Watzek G, Zechner W. Thermal effects of a combined irrigation method during implant site drilling. A standardized in vitro study using a bovine rib model. Clin Oral Implants Res. 2014;25:665-74.
https://doi.org/10.1111/clr.12032

 

12. Strbac GD, Giannis K, Unger E, Mittlbšck M, Vasak C, Watzek G, et al. Drilling- and withdrawing-related thermal changes during implant site osteotomies. Clin Implant Dent Relat Res. 2015;17:32-43.
https://doi.org/10.1111/cid.12091

 

13. Strbac GD, Giannis K, Unger E, Mittlbšck M, Watzek G, Zechner W. A novel standardized bone model for thermal evaluation of bone osteotomies with various irrigation methods. Clin Oral Implants Res. 2014;25:622-31.
https://doi.org/10.1111/clr.12090

 

14. Gehrke SA, Bettach R, Taschieri S, Boukhris G, Corbella S, Del Fabbro M. Temperature changes in cortical bone after implant site preparation using a single bur versus multiple drilling steps: an in vitro investigation. Clin Implant Dent Relat Res. 2015;17:700-7.
https://doi.org/10.1111/cid.12172

 

15. Oh HJ, Wikesjš UM, Kang HS, Ku Y, Eom TG, Koo KT. Effect of implant drill characteristics on heat generation in osteotomy sites: a pilot study. Clin Oral Implants Res. 2011;22:722-6.
https://doi.org/10.1111/j.1600-0501.2010.02051.x

 

16. Jeong SM, Yoo JH, Fang Y, Choi BH, Son JS, Oh JH. The effect of guided flapless implant procedure on heat generation from implant drilling. J Craniomaxillofac Surg. 2014;42:725-9.
https://doi.org/10.1016/j.jcms.2013.11.002

 

17. A Turkyilmaz I, Tumer C, Ozbek EN, TšzŸm TF. Relations between the bone density values from computerized tomography, and implant stability parameters: a clinical study of 230 regular platform implants. J Clin Periodontol 2007; 34:716-22.
https://doi.org/10.1111/j.1600-051X.2007.01112.x

 

18. Song YD, Jun SH, Kwon JJ. Correlation between bone quality evaluated by cone-beam computerized tomography and implant primary stability. Int J Oral Maxillofac Implants 2009;24:59-64.

 

19. Deeb GR, Soung GY, Best AM, Laskin DM. Antibiotic Prescribing Habits of Oral and Maxillofacial Surgeons in Conjunction With Routine Dental Implant Placement. J Oral Maxillofac Surg. 2015;73:1926-31.
https://doi.org/10.1016/j.joms.2015.05.024

 

20. Buser D, Janner SF, Wittneben JG, Brägger U, Ramseier CA, Salvi GE. 10-year survival and success rates of 511 titanium implants with a sandblasted and acid-etched surface: a retrospective study in 303 partially edentulous patients. Clin Implant Dent Relat Res. 2012;14:839-851.
https://doi.org/10.1111/j.1708-8208.2012.00456.x

 

21. Eriksson RA, Adell R. Temperatures during drilling for the placement of implant using the osseointegration technique. J Oral Maxillofac Surg. 1986;44:4-7.
https://doi.org/10.1016/0278-2391(86)90006-6

 

22. Tehemar S. H. Factors affecting heat generation during implant site preparation: a review of biologic observations and future considerations. Int J Oral Maxillofac Implants. 1999;14:127-36.

 

23. Trisi P, Berardini M, Falco A, Vulpiani MP, Masciotra L. Effect of 50 to 60”C heating on osseointegration of dental implants in dense bone: an in vivo histological study. Implant Dent. 2014;23:516-21.
https://doi.org/10.1097/ID.0000000000000162

 

24. Sarendranath A, Khan R, Tovar N, Marin C, You D, Redisch J, et al. Effect of low speed drilling on osseointegration using simplified drilling procedures. Br J Oral Maxillofac Surg. 2015;53:550-6.
https://doi.org/10.1016/j.bjoms.2015.03.010

 

25. Kim SJ, Yoo J, Kim YS, Shin SW. Temperature change in pig rib bone during implant site preparation by low-speed drilling. J Appl Oral Sci. 2010;18:522-7.
https://doi.org/10.1590/S1678-77572010000500016

 

26. Mšhlhenrich SC, Modabber A, Steiner T, Mitchell DA, Hšlzle F. Heat generation and drill wear during dental implant site preparation: systematic review. Br J Oral Maxillofac Surg. 2015;53:679-89.
https://doi.org/10.1016/j.bjoms.2015.05.004

 

27. Herekar M, Sethi M, Mulani S, Fernandes A, Kulkarni H. Influence of platform switching on periimplant bone loss: a systematic review and meta-analysis. Implant Dent. 2014;23:439-50.
https://doi.org/10.1097/ID.0000000000000080

 

28. Demiralp K…, Akbulut N, Kursun S, Argun D, Bagis N, Orhan K. Survival rate of short, locking taper implants with a plateau design: a 5-year retrospective study. Biomed Res Int. 2015;2015:197451.

 

29. Al-Hashedi AA, Taiyeb-Ali TB, Yunus N. Outcomes of placing short implants in the posterior mandible: a preliminary randomized controlled trial. Aust Dent J. 2016;61:208-18.
https://doi.org/10.1111/adj.12337