Witek L, Alifarag AM, Tovar N, Lopez CD, Gil LF,
Gorbonosov M, Hannan K, Neiva R, Coelho PG. Osteogenic parameters
surrounding trabecular tantalum metal implants in osteotomies prepared via
osseodensification drilling. Med Oral Patol Oral Cir Bucal. 2019 Nov 1;24 (6):e764-9.
doi:10.4317/medoral.23108
http://dx.doi.org/doi:10.4317/medoral.23108
|
1. Ehrenfest DMD, Coelho PG, Kang B-S,
Sul Y-T, Albrektsson T. Classification of osseointegrated implant surfaces:
materials, chemistry and topography. Trends in biotechnology. 2010;28:198-206. |
|
|
|
|
|
2. Lopez CD, Alifarag AM, Torroni A,
Tovar N, Diaz-Siso JR, Witek L, et al. Osseodensification for enhancement of
spinal surgical hardware fixation. Journal of the mechanical behavior of
biomedical materials. 2017;69:275-81. |
|
|
|
|
|
3. Fehring TK, Odum S, Griffin WL, Mason
JB, Nadaud M. Early failures in total knee arthroplasty. Clinical orthopaedics and
related research. 2001;392:315-8. |
|
|
|
|
|
4. Vanhegan I, Malik A, Jayakumar P,
Islam SU, Haddad F. A financial analysis of revision hip arthroplasty. J Bone
Joint Surg Br. 2012;94:619-23. |
|
|
|
|
|
5. Landgraeber S, Jäger M, Jacobs JJ,
Hallab NJ. The pathology of orthopedic implant failure is mediated by innate
immune system cytokines. Mediators of inflammation. 2014;2014. |
|
|
|
|
|
6. Kurtz S, Ong K, Lau E, Mowat F,
Halpern M. Projections of primary and revision hip and knee arthroplasty in
the United States from 2005 to 2030. J Bone Joint Surg Am. 2007;89:780-5. |
|
|
|
|
|
7. Albrektsson T, Brånemark PI, Hansson
HA, Lindström J. Osseointegrated Titanium Implants: Requirements for Ensuring
a Long-Lasting, Direct Bone-to-Implant Anchorage in Man. Acta Orthopaedica
Scandinavica. 1981;52:155-70. |
|
|
|
|
|
8. Lahens B, Neiva R, Tovar N, Alifarag
AM, Jimbo R, Bonfante EA, et al. Biomechanical and histologic basis of
osseodensification drilling for endosteal implant placement in low density
bone. An experimental study in sheep. Journal of the Mechanical Behavior of
Biomedical Materials. 2016;63:56-65. |
|
|
|
|
|
9. Trisi P, Todisco M, Consolo U,
Travaglini D. High versus low implant insertion torque: a histologic,
histomorphometric, and biomechanical study in the sheep mandible. Int J Oral Maxillofac
Implants. 2011;26:837-49. |
|
|
|
|
|
10. Sandén B, Olerud C, Petren-Mallmin M,
Larsson S. Hydroxyapatite coating improves fixation of pedicle screws A
CLINICAL STUDY. J Bone Joint Surg Br. 2002;84:387-91. |
|
|
|
|
|
11. Coelho PG, Granato R, Marin C, Teixeira HS, Suzuki M, Valverde
GB, et al. The effect of different implant
macrogeometries and surface treatment in early biomechanical fixation: an
experimental study in dogs. Journal of the mechanical behavior of biomedical
materials. 2011;4:1974-81. |
|
|
|
|
|
12. Martin J, Schwartz Z, Hummert T,
Schraub D, Simpson J, Lankford J, et al. Effect of titanium surface roughness
on proliferation, differentiation, and protein synthesis of human
osteoblast-like cells (MG63). Journal of Biomedical Materials Research Part
A. 1995;29:389-401. |
|
|
|
|
|
13. Kieswetter K, Schwartz Z, Dean D,
Boyan B. The role of implant surface characteristics in the healing of bone. Crit Rev Oral Biol Med. 1996;7:329-45. |
|
|
|
|
|
14. McCann PA, Sarangi PP, Baker RP, Blom
AW, Amirfeyz R. Thermal damage during humeral reaming in total shoulder
resurfacing. International journal of shoulder surgery. 2013;7:100. |
|
|
|
|
|
15. Augustin G, Davila S, Mihoci K,
Udiljak T, Vedrina DS, Antabak A. Thermal osteonecrosis and bone drilling
parameters revisited. Arch Orthop Trauma Surg. 2008;128:71-7. |
|
|
|
|
|
16. Natali C, Ingle P, Dowell J.
Orthopaedic bone drills-can they be improved? Temperature changes near the
drilling face. J Bone Joint Surg Br. 1996;78:357-62. |
|
|
|
|
|
17. Anitua E, Carda C, Andia I. A novel
drilling procedure and subsequent bone autograft preparation: a technical
note. International
Journal of Oral and Maxillofacial Implants. 2007;22:138-45. |
|
|
|
|
|
18. Buchter A, Kleinheinz J, Wiesmann HP,
Kersken J, Nienkemper M, Weyhrother H, et al. Biological and biomechanical
evaluation of bone remodelling and implant stability after using an osteotome
technique. Clin Oral Implants Res. 2005;16:1-8. |
|
|
|
|
|
19. Campos FE, Gomes JB, Marin C,
Teixeira HS, Suzuki M, Witek L, et al. Effect of drilling dimension on
implant placement torque and early osseointegration stages: an experimental
study in dogs. J Oral Maxillofac Surg. 2012;70:e43-50. |
|
|
|
|
|
20. Tabassum A, Meijer GJ, Walboomers XF,
Jansen JA. Evaluation of primary and secondary stability of titanium implants
using different surgical techniques. Clin Oral Implants Res. 2014;25:487-92. |
|
|
|
|
|
21. Huwais S, Meyer E.
Osseodensification: A novel approach in implant preparation to increase
primary stability, bone mineral density and bone to implant contact. Int J
Oral Maxillofac Implants. 2017;32:27-36. |
|
|
|
|
|
22. Coelho PG, Marin C, Granato R, Giro G, Suzuki M, Bonfante EA. Biomechanical and histologic evaluation of non-washed resorbable
blasting media and alumina-blasted/acid-etched surfaces. Clinical oral
implants research. 2012;23:132-5. |
|
|
|
|
|
23. Leonard G, Coelho P, Polyzois I,
Stassen L, Claffey N. A study of the bone healing kinetics of plateau versus
screw root design titanium dental implants. Clinical Oral Implants Research. 2009;20:232-9. |
|
|
|
|
|
24. Bauer TW, Muschler GF. Bone graft
materials: an overview of the basic science. Clinical orthopaedics and related
research. 2000;371:10-27. |
|
|
|
|
|
25. Rochefort GY. The osteocyte as a
therapeutic target in the treatment of osteoporosis. Therapeutic advances in
musculoskeletal disease. 2014;6:79-91. |
|
|
|
|
|
26. Jimi E, Hirata S, Shin M, Yamazaki M,
Fukushima H. Molecular mechanisms of BMP-induced bone formation: cross-talk
between BMP and NF-κB signaling pathways in
osteoblastogenesis. Japanese Dental Science Review. 2010;46:33-42. |
|
|
|
|