1. Albrektsson T, Brånemark PI, Hansson HA, Lindström J. Osseointe- grated titanium implants. Requirements for ensuring a long-last- ing, direct bone-to-implant anchorage in man. Acta Orthop Scand. 1981;52:155-70.

https://doi.org/10.3109/17453678108991776

PMid:7246093 

2. Molly L. Bone density and primary stability in implant therapy. Clin Oral Implants Res. 2006;17:124-35.

https://doi.org/10.1111/j.1600-0501.2006.01356.x

PMid:16968388 

3. Chong L, Khocht A, Suzuki JB, Gaughan J. Effect of implant design on initial stability of tapered implants. J Oral Implantol. 2009;35:130-5.

https://doi.org/10.1563/1548-1336-35.3.130

PMid:19579524 

4. Dos Santos MV, Elias CN, Cavalcanti Lima JH. The effects of superficial roughness and design on the primary stability of dental implants. Clin Implant Dent Relat Res. 2011;13:215-23.

https://doi.org/10.1111/j.1708-8208.2009.00202.x

PMid:19744197 

5. Javed F, Romanos GE. The role of primary stability for successful immediate loading of dental implants. A literature review. J Dent. 2010;38:612-20.

https://doi.org/10.1016/j.jdent.2010.05.013

PMid:20546821 

6. Marquezan M, Osório A, Sant'Anna E, Souza MM, Maia L. Does bone mineral density influence the primary stability of dental implants? A systematic review. Clin Oral Implants Res. 2012;23:767-74.

https://doi.org/10.1111/j.1600-0501.2011.02228.x

PMid:21635560 

7. Valente ML, de Castro DT, Shimano AC, Lepri CP, dos Reis AC. Analyzing the influence of a new dental implant design on primary stability. Clin Implant Dent Relat Res. 2016;18:168-73.

https://doi.org/10.1111/cid.12324

PMid:25801693 

8. Möhlhenrich SC, Heussen N, Elvers D, Steiner T, Hölzle F, Modabber A. Compensating for poor primary implant stability in different bone densities by varying implant geometry: A laboratory study. Int J Oral Maxillofac Surg. 2015;44:1514-20.

https://doi.org/10.1016/j.ijom.2015.08.985

PMid:26362488 

9. O'Sullivan D, Sennerby L, Meredith N. Measurements comparing the initial stability of five designs of dental implants: a human cadaver study. Clin Implant Dent Relat Res. 2000;2:85-92.

https://doi.org/10.1111/j.1708-8208.2000.tb00110.x

PMid:11359268 

10. Alghamdi H, Anand PS, Anil S. Undersized implant site preparation to enhance primary implant stability in poor bone density: a prospective clinical study. J Oral Maxillofac Surg. 2011;69:e506-12.

https://doi.org/10.1016/j.joms.2011.08.007

PMid:22117707 

11. Coelho PG, Marin C, Teixeira HS, Campos FE, Gomes JB, Guastaldi F, et al. Biomechanical evaluation of undersized drilling on implant biomechanical stability at early implantation times. J Oral Maxillofac Surg. 2013;71:e69-75.

https://doi.org/10.1016/j.joms.2012.10.008

PMid:23351770 

12. Bashutski JD, D'Silva NJ, Wang HL. Implant compression necrosis: current understanding and case report. J Periodontol. 2009;80:700-4.

https://doi.org/10.1902/jop.2009.080581

PMid:19335092 

13. Toia M, Stocchero M, Cecchinato F, Corrà E, Jimbo R, Cecchinato D. Clinical Considerations of Adapted Drilling Protocol by Bone Quality Perception. Int J Oral Maxillofac Implants. 2017;32:1288-95.

https://doi.org/10.11607/jomi.5881

PMid:29140373 

14. Lemos CAA, Verri FR, de Oliveira Neto OB, Cruz RS, Luna Gomes JM, da Silva Casado BG, et al. Clinical effect of the high insertion torque on dental implants: A systematic review and meta-analysis. J Prosthet Dent. 2021;126:490-6.

https://doi.org/10.1016/j.prosdent.2020.06.012

PMid:32917400 

15. Berardini M, Trisi P, Sinjari B, Rutjes AW, Caputi S. The effects of high insertion torque versus low insertion torque on marginal bone resorption and implant failure rates: A systematic review with meta- analyses. Implant Dent. 2016;25:532-40.

https://doi.org/10.1097/ID.0000000000000422

PMid:27129002 

16. Roca-Millan E, González-Navarro B, Domínguez-Mínger J, Marí-Roig A, Jané-Salas E, López-López J. Implant insertion torque and marginal bone loss: A systematic review and meta-analysis. Int J Oral Implantol (Berl). 2020;13:345-53.

https://doi.org/10.3390/v13020250

PMid:33562820 PMCid:PMC7915238

17. Calvert KL, Trumble KP, Webster TJ, Kirkpatrick LA. Characterization of commercial rigid polyurethane foams used as bone analogs for implant testing. J Mater Sci Mater Med. 2010;21:1453-61.

https://doi.org/10.1007/s10856-010-4024-6

PMid:20162325 

18. Hsu JT, Huang HL, Chang CH, Tsai MT, Hung WC, Fuh LJ. Relationship of three-dimensional bone-to-implant contact to primary implant stability and peri-implant bone strain in immediate loading: microcomputed tomographic and in vitro analyses. Int J Oral Maxillofac Implants. 2013;28:367-74.

https://doi.org/10.11607/jomi.2407

PMid:23527336 

19. Duyck J, Corpas L, Vermeiren S, Ogawa T, Quirynen M, Vandamme K, et al. Histological, histomorphometrical, and radiological evaluation of an experimental implant design with a high insertion torque. Clin Oral Implants Res. 2010;21:877-84.

https://doi.org/10.1111/j.1600-0501.2010.01895.x

PMid:20528892 

20. Cohen O, Ormianer Z, Tal H, Rothamel D, Weinreb M, Moses O. Differences in crestal bone-to-implant contact following an under-drilling compared to an over-drilling protocol. A study in the rabbit tibia. Clin Oral Investig. 2016;20:2475-80.

https://doi.org/10.1007/s00784-016-1765-8

PMid:26931772 

21. Marconcini S, Giammarinaro E, Toti P, Alfonsi F, Covani U, Barone A. Longitudinal analysis on the effect of insertion torque on delayed single implants: A 3-year randomized clinical study. Clin Implant Dent Relat Res. 2018;20:322-32.

https://doi.org/10.1111/cid.12586

PMid:29359880 

22. Brunski JB. Biomechanical considerations in dental implant design. Int J Oral Implantol. 1988;5:31-4.

PMid:3271580

23. Atieh MA, Baqain ZH, Tawse-Smith A, Ma S, Almoselli M, Lin L, et al. The influence of insertion torque values on the failure and complication rates of dental implants: A systematic review and meta-analysis. Clin Implant Dent Relat Res. 2021;23:341-60.

https://doi.org/10.1111/cid.12993

PMid:33764648 

24. Stocchero M, Toia M, Cecchinato D, Becktor JP, Coelho PG, Jimbo R. Biomechanical, biologic and clinical outcomes of undersized implant surgical preparation: A systematic review. Int J Oral Maxillofac Implants. 2016;31:1247-63.

https://doi.org/10.11607/jomi.5340

PMid:27861649 

25. Turkyilmaz I, Tozum TF. Enhancing primary implant stability by undersizing implant site preparation: A human cadaver study. J Stomatol Oral Maxillofac Surg. 2020;121:58-62.

https://doi.org/10.1016/j.jormas.2019.04.016

PMid:31055093 

26. Östman PO, Wennerberg A, Ekestubbe A, Albrektsson T. Immediate occlusal loading of NanoTite™ tapered implants: a prospective 1-year clinical and radiographic study. Clin Implant Dent Relat Res. 2013;15:809-18.

https://doi.org/10.1111/j.1708-8208.2011.00437.x

PMid:22251669 

27. Anitua E, Alkhraisat MH, Piñas L, Orive G. Efficacy of biologically guided implant site preparation to obtain adequate primary implant stability. Ann Anat. 2015;199:9-15.

https://doi.org/10.1016/j.aanat.2014.02.005

PMid:24661634 

28. Farronato D, Manfredini M, Stocchero M, Caccia M, Azzi L, Farronato M. Influence of Bone Quality, Drilling Protocol, Implant Diameter/Length on Primary Stability: An In Vitro Comparative Study on Insertion Torque and Resonance Frequency Analysis. J Oral Implantol. 2020;46:182-9.

https://doi.org/10.1563/aaid-joi-D-19-00145

PMid:32582919