Raj R, Manju V, Kumar-Gopal V, Eswar M. Analysis of factors determining thermal changes at osteotomy site in dental implant placement - An in-vitro study. J Clin Exp Dent. 2021;13(3):e234-9.

doi:10.4317/jced.57346

https://doi.org/10.4317/jced.57346

___________

References

1. Adell R, Lekholm U, Rockler B, Brånemark PI. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Surg. 1981;10:387-416.
https://doi.org/10.1016/S0300-9785(81)80077-4

PMid:6809663

2. Palma-Carrió C, Maestre-Ferrín L, Peñarrocha-Oltra D, Peñarrocha-Diago MA, Peñarrocha-Diago M. Risk factors associated with early failure of dental implants. A literature review. Med Oral Patol Oral Cir Bucal. 2011;16:e514-7.
https://doi.org/10.4317/medoral.16.e514
PMid:21196891

3. Esposito M, Hirsch JM, Lekholm U, Thomsen P. Biological factors contributing to failures of osseointegrated oral implants (I). Success criteria and epidemiology. Eur J Oral Sci. 1998;106:527-551.
https://doi.org/10.1046/j.0909-8836..t01-2-.x
PMid:9527353

4. Davidson SR, James DF. Measurement of thermal conductivity of bovine cortical bone. Med Eng Phys. 2000;22:741-747.
https://doi.org/10.1016/S1350-4533(01)00003-0

PMid:11334760

5. Abouzgia MB, James DF. Temperature rise during drilling through bone. Int J Oral Maxillofac Implants. 1997;12:342-53.

PMid:9197099

6. Eriksson AR, Albrektsson T, Albrektsson B. Heat caused by drilling cortical bone: temperature measured in vivo in patients and animals. Acta Orthop Scand. 1984;55:629-631.
https://doi.org/10.3109/17453678408992410
PMid:6524329

7. Sharawy M, Misch CE, Weller N, Tehemar S. Heat generation during implant drilling: the significance of motor speed. J Oral Maxillofac Surg. 2002;60:1160-1169.
https://doi.org/10.1053/joms.2002.34992
PMid:12378492

8. Haider R, Watzek G, Plenk Jr H. Effects of drill cooling and bone structure on IMZ implant fixation. Int J Oral Maxillofac Implants. 1993;8:83-91.

PMid:8468088

9. Krause WR, Bradbury DW, Kelly JE, Lunceford EM. Temperature elevations in orthopaedic cutting operations. J Biomech. 1982;15:267-275.
https://doi.org/10.1016/0021-9290(82)90173-7

PMid:7096382

10. Abouzgia MB, Symington JM. Effect of drill speed on bone temperature. Int J Oral Maxillofac Surg. 1996;25:394-9.
https://doi.org/10.1016/S0901-5027(06)80040-8

PMid:8961026

11. Reingewirtz Y, Szmukler-Moncler S, Senger B. Influence of different parameters on bone heating and drilling time in implantology. Clin Oral Implants Res. 1997;8:189-97.
https://doi.org/10.1034/j.1600-0501.1997.080305.x
PMid:9586463

12. Jo KH, Yoon KH, Park KS, Bae JH, You KH, Han JH, et al. Thermally induced bone necrosis during implant surgery: 3 case reports. J Korean Assoc Oral Maxillofac Surg. 2011;37:406-14.
https://doi.org/10.5125/jkaoms.2011.37.5.406

13. Gaspar J, Borrecho G, Oliveira P, Salvado F, Martins dos Santos J. Osteotomy at low-speed drilling without irrigation versus high-speed drilling with irrigation: an experimental study. Acta Med Port. 2013;26:231-6.

PMid:23815837

14. Brisman DL. The effect of speed, pressure, and time on bone temperature during the drilling of implant sites. Int J Oral Maxillofac Implants. 1996;11:35-7.

PMid:8820120

15. Matthews LS, Hirsch C. Temperatures measured in human cortical bone when drilling. JBJS. 1972;54:297-308.
https://doi.org/10.2106/00004623-197254020-00008

PMid:4651263

16. Hobkirk JA, Rusiniak K. Investigation of variable factors in drilling bone. J Oral Surg Am Dent Assoc 1965. 1977;35:968-73.

PMid:336854

17. Sutter F, Krekeler G, Schwammberger AE, Sutter FJ. Atraumatic surgical technique and implant bed preparation. Quintessence Int. 1992;23:811-6.

PMid:1305298

18. Yacker MJ, Klein M. The effect of irrigation on osteotomy depth and bur diameter. Int J Oral Maxillofac Implants. 1996;11:634-8.

PMid:8908862