Nakano LJN, Lopes GRS, Firmino AS, de Matos JDM, Tango RN, Paes-Junior TJA. Analysis of bond strength between a nylon reinforcement structure and dental resins. J Clin Exp Dent. 2021;13(5):e505-10.

doi:10.4317/jced.57654

___________

References

1. Frazer RQ, Byron RT, Osborne PB, West KP. PMMA: an essential material in medicine and dentistry. J Long Term Eff Med Implants. 2005;15:629-39. https://doi.org/10.1615/JLongTermEffMedImplants.v15.i6.60 PMid:16393131

2. Ladha K, Shah D. An in-vitro evaluation of the flexural strength of heat-polymerized poly (methyl methacrylate) denture resin reinforced with fibers. J Indian Prosthodont Soc. 2011;11:215-20. https://doi.org/10.1007/s13191-011-0086-5 PMid:23204730 PMCid:PMC3205174

3. Jagger DC, Jagger RG, Allen SM, Harrison A. An investigation into the transverse and impact strength of "high strength" denture base acrylic resins. J Oral Rehabil. 2002;29:263-7. https://doi.org/10.1046/j.1365-2842.2002.00830.x PMid:11896843

4. Ali IL, Yunus N, Abu-Hassan MI. Hardness, flexural strength, and flexural modulus comparisons of three differently cured denture base systems. J Prosthodont. 2008;17:545-9. https://doi.org/10.1111/j.1532-849X.2008.00357.x PMid:18761582

5. Yadav NS, Elkawash H. Flexural strength of denture base resin reinforced with aluminum oxide and processed by different processing techniques. Journal of Advanced Oral Research. 2011;2:33-36. https://doi.org/10.1177/2229411220110107

6. Johnston EP, Nicholls JI, Smith DE. Flexure fatigue of 10 commonly used denture base resins. J Prosthet Dent. 1981;46:478-83. https://doi.org/10.1016/0022-3913(81)90232-8 PMid:6946217

7. Chitchumnong P, Brooks SC, Stafford GD. Comparison of three- and four-point flexural strength testing of denture-base polymers. Dent Mater. 1989;5:2-5. https://doi.org/10.1016/0109-5641(89)90082-1 PMid:2606263

8. Ruffino AR. Effect of steel strengtheners on fracture resistance of the acrylic resin complete denture base. J Prosthet Dent. 1985;54:75-8. https://doi.org/10.1016/S0022-3913(85)80074-3 PMid:3894643

9. Rodford RA. Further development and evaluation of high impact strength denture base materials. J Dent. 1990;18:151-7. https://doi.org/10.1016/0300-5712(90)90056-K PMid:2401765

10. Jagger DC, Harrison A, Jandt KD. The reinforcement of dentures. J Oral Rehabil. 1999;26:185-94. https://doi.org/10.1046/j.1365-2842.1999.00375.x PMid:10194725

11. Kelly E. Fatigue failure in denture base polymers. J Prosthet Dent. 1969;21:257-66. https://doi.org/10.1016/0022-3913(69)90289-3 PMid:5251347

12. DeBoer J, Vermilyea SG, Brady RE. The effect of carbon fiber orientation on the fatigue resistance and bending properties of two denture resins. J Prosthet Dent. 1984;51:119-21. https://doi.org/10.1016/S0022-3913(84)80117-1 PMid:6583382

13. Solnit GS. The effect of methyl methacrylate reinforcement with silane-treated and untreated glass fibers. J Prosthet Dent. 1991;66:310-4. https://doi.org/10.1016/0022-3913(91)90255-U PMid:1800725

14. Dixon DL, Breeding LC. The transverse strengths of three denture base resins reinforced with polyethylene fibers. J Prosthet Dent. 1992;67:417-9. https://doi.org/10.1016/0022-3913(92)90261-8 PMid:1507114

15. Ramos V Jr, Runyan DA, Christensen LC. The effect of plasma-treated polyethylene fiber on the fracture strength of polymethyl methacrylate. J Prosthet Dent. 1996;76:94-6. https://doi.org/10.1016/S0022-3913(96)90348-0 PMid:8814637

16. Vallittu PK. The effect of glass fiber reinforcement on the fracture resistance of a provisional fixed partial denture. J Prosthet Dent. 1998;79:125-30. https://doi.org/10.1016/S0022-3913(98)70204-5 PMid:9513095

17. Uzun G, Hersek N, Tinçer T. Effect of five woven fiber reinforcements on the impact and transverse strength of a denture base resin. J Prosthet Dent. 1999;81:616-20. https://doi.org/10.1016/S0022-3913(99)70218-0 PMid:10220668

18. John J, Gangadhar SA, Shah I. Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers. J Prosthet Dent. 2001;86:424-427. https://doi.org/10.1067/mpr.2001.118564 PMid:11677538

19. Bae JM, Kim KN, Hattori M, Hasegawa K, Yoshinari M, Kawada E, et al. Fatigue strengths of particulate filler composites reinforced with fibers. Dent Mater J. 2004;23:166-74. https://doi.org/10.4012/dmj.23.166 PMid:15287563

20. Segerström S, Ruyter IE. Mechanical and physical properties of carbon-graphite fiber-reinforced polymers intended for implant suprastructures. Dent Mater. 2007;23:1150-6. https://doi.org/10.1016/j.dental.2006.06.050 PMid:17118439

21. Almeida CS, Amaral M, de Cássia Papaiz Gonçalves F, de Arruda Paes-Junior TJ. Effect of an experimental silica-nylon reinforcement on the fracture load and flexural strength of bisacrylic interim partial fixed dental prostheses. J Prosthet Dent. 2016;115:301-5. https://doi.org/10.1016/j.prosdent.2015.08.009 PMid:26548883

22. Nagakura M, Tanimoto Y, Nishiyama N. Effect of fiber content on flexural properties of glass fiber-reinforced polyamide-6 prepared by injection molding. Dent Mater J. 2017;36:415-421. https://doi.org/10.4012/dmj.2016-252 PMid:28190814

23. Gonçalves FCP, Amaral M, Borges ALS, Gonçalves LFM, Paes-Junior TJA. Fracture load of complete-arch implant-supported prostheses reinforced with nylon-silica mesh: An in vitro study. J Prosthet Dent. 2018;119:606-610. https://doi.org/10.1016/j.prosdent.2017.05.018 PMid:28709676

24. Vallittu PK. Comparison of two different silane compounds used for improving adhesion between fibres and acrylic denture base material. J Oral Rehabil. 1993;20:533-9. https://doi.org/10.1111/j.1365-2842.1993.tb01640.x PMid:10412475

25. Vallittu PK. Glass fiber reinforcement in repaired acrylic resin removable dentures: preliminary results of a clinical study. Quintessence Int. 1997;28:39-44. PMid:10332353

26. Fong H. Electrospun nylon 6 nanofiber reinforced BIS-GMA/TEGDMA dental restorative composite resins. Polymer. 2004;45:2427-32. https://doi.org/10.1016/j.polymer.2004.01.067

27. Tian M, Gao Y, Liu Y, Liao Y, Xu R, Hedin NE, et al. Bis-GMA/TEGDMA Dental Composites Reinforced with Electrospun Nylon 6 Nanocomposite Nanofibers Containing Highly Aligned Fibrillar Silicate Single Crystals. Polymer (Guildf). 2007;48:2720-28. https://doi.org/10.1016/j.polymer.2007.03.032 PMid:17940586 PMCid:PMC2031841

28. Borges ALS, Münchow EA, de Oliveira Souza AC, Yoshida T, Vallittu PK, Bottino MC. Effect of random/aligned nylon-6/MWCNT fibers on dental resin composite reinforcement. J Mech Behav Biomed Mater. 2015;48:134-144. https://doi.org/10.1016/j.jmbbm.2015.03.019 PMid:25933169

29. Hamanaka I, Shimizu H, Takahashi Y. Bond strength of a chairside autopolymerizing reline resin to injection-molded thermoplastic denture base resins. J Prosthodont Res. 2017;61:67-72. https://doi.org/10.1016/j.jpor.2016.04.006 PMid:27238884

30. Paes-Junior TJDA, De Castro HL, Borges ALS, Della Bona A, Gonçalves FDCP. A novel silica-nylon mesh reinforcement for dental prostheses. Advances in Materials Science and Engineering. 2017;(3709171):1-7. https://doi.org/10.1155/2017/3709171

31. Diniz V, Monteiro JB, Rodrigues JVM, Prado PHCO, Melo RMD. Impact of Acid Concentration and Firing on the Long-term Bond Strength of a Zirconia-Lithium Silicate Ceramic Following Adhesive Cementation. The journal of adhesive dentistry. 2019;21:355-363. PMid:31432050

32. Şanlı S, Çömlekoğlu MD, Çömlekoğlu E, Sonugelen M, Pamir T, Darvell BW. Influence of surface treatment on the resin-bonding of zirconia. Dent Mater. 2015;31:657-68. https://doi.org/10.1016/j.dental.2015.03.004 PMid:25862408