Aguilar-Hernández
J, Torres-Méndez F, Méndez-González MV, Davila-Perez CE, Kolosovas-Machuca ES,
Gutierrez-Sánchez M. Investigation of the thermal and physicochemical behavior
of two types of gutta-percha cones for back-filling the root canal. J Clin Exp
Dent. 2023;15(5):e382-9.
doi:10.4317/jced.60095
https://doi.org/10.4317/jced.60095
__________
References
|
1.
Vishwanath V, Rao HM. Gutta-percha in endodontics-A comprehensive review of
material science J Conserv Dent. 2019;22:216-222. |
|
|
|
|
|
2.
Silva-Júnior JBA, Paula RD, Feitosa JPA, Gurgel-Filho ED, Maniglia-Ferreira
C, FJ Filho DS. In vivo aging of gutta-percha dental cone. J Appl Polym Sci.
2006;100:4082-8. |
|
|
|
|
|
3.
Dong M, Zhang J, Liu L, Hou G, Yu Y, Yuan C, et al. New gutta percha
composite with high thermal conductivity and low shear viscosity contributed
by the bridging fillers containing ZnO and CNTs. Compos B Eng.
2019;173:106903. |
|
|
|
|
|
4.
Liao SC, Wang HH, Hsu YH, Huang HM, Gutmann JL, Hsieh SC. The investigation
of thermal behaviour and physical properties of several types of contemporary
gutta-percha points. Int Endod J. 2021;54:2125-32. |
|
|
|
|
|
5.
Maniglia-Ferreira C, Gurgel-Filho ED, Silva Jr JBA, Paula RCMD, Feitosa JPA,
Gomes BPFDA, et al. Brazilian gutta-percha points. Part II: thermal properties.
Braz Oral Res. 2007;21:29-34. |
|
|
|
|
|
6.
Roberts HW, Kirkpatrick TC, Bergeron BE. Thermal analysis and stability of commercially
available endodontic obturation materials. Clin Oral Investig. 2017;21:2589-2602. |
|
|
|
|
|
7.
Cavenago BC, Ordinola-Zapata R, Duarte MAH, del Carpio-Perochena AE,
Villas-Bôas MH, Marciano MA, et al. Efficacy of xylene and passive ultrasonic
irrigation on remaining root filling material during retreatment of
anatomically complex teeth. Int Endod J. 2014;47:1078-83. |
|
|
|
|
|
8.
Hsu YH, Wang HH, Shen YK, Gutmann JL, Hsieh SC. Thermal behavior and
viscoelastic properties of gutta-percha used for back-filling the root canal.
J Dent Sci. 2020;15:28-33. |
|
|
|
|
|
9.
Lipski M, Woźniak K. In vitro infrared thermographic assessment of root surface
temperature rises during thermafil retreatment using system B. J Endod.
2003;29:413-15. |
|
|
|
|
|
10.
Atmeh AR, Hadis M, Camilleri J. Real-time chemical analysis of root filling
materials with heating: guidelines for safe temperature levels. Int Endod J.
2020;53:698-708. |
|
|
|
|
|
11.
Gavish M, Corrigan J, Woodward AE. FTIR investigations of crystallinity and
surface reaction for trans-1, 4-polyisoprene lamellar structures crystallized
from solution. Macromolecules. 1988;21:2079-83. |
|
|
|
|
|
12.
Jaya-Ratri P, Tashiro K. Application of the simultaneous measurement system
of WAXD, SAXS and transmission FTIR spectra to the study of structural
changes in the cold-and melt-crystallization processes of trans-1, 4-polyisoprene.
Polym J. 2013;45:1019-26. |
|
|
|
|
|
13.
Sun Y, Zhang F, Wu D, Zhu H. Roles of polyacrylate dispersant in the synthesis
of well-dispersed BaSO4 nanoparticles by simple precipitation. Particuology.
2014;14:33-37. |
|
|
|
|
|
14.
Ramaswamy V, Vimalathithan RM, Ponnusamy V. Synthesis and characterization of
BaSO4 nano particles using micro emulsion technique. Adv Appl Sci Res. 2010;1:197-204. |
|
|
|
|
|
15.
Buchanan LS. The continuous wave of condensation technique: a convergence of
conceptual and procedural advances in obturation. Dent Today. 1994;13:80-82. PMid:9540580 |
|
|
|
|
|
16.
Marroquín BB, Wolf TG, Schürger D, Willershausen B. Thermoplastic properties
of endodontic gutta-percha: a thermographic in vitro study. J Endod. 2015;41:79-82. |
|