Zotti F,
Ferrari F, Paganelli C, Pilati F, Lanzaretti G, Arlacchi D, Zerman N.
Increasing the fracture strength of MOD restorations with Ribbond fibers. J
Clin Exp Dent. 2024;16(6):e707-13.
doi:10.4317/jced.61608
https://doi.org/10.4317/jced.61608
______
References
|
1.
Goel VK, Khera SC, Gurusami S, Chen RCS. Effect of Cavity Depth on Stresses
in a Restored Tooth. J Prosthet Dent. 1992;67:174-183. |
|
|
|
|
|
2.
Ciavoi G, Mărgărit R, Todor L, Bodnar D, Dina MN, Tărlungeanu DI, et al. Base
Materials' Influence on Fracture Resistance of Molars with MOD Cavities.
Materials. 2021;14:5242. |
|
|
|
|
|
3.
Forster A, Braunitzer G, Tóth M, Szabó BP, Fráter M. In Vitro Fracture
Resistance of Adhesively Restored Molar Teeth with Different MOD Cavity
Dimensions. Journal of Prosthodontics. 2019;28. |
|
|
|
|
|
4.
Ludovichetti FS, Lucchi P, Zambon G, Pezzato L, Bertolini R, Zerman N, et al.
Depth of Cure, Hardness, Roughness and Filler Dimension of Bulk-Fill
Flowable, Conventional Flowable and High-Strength Universal Injectable
Composites: An In Vitro Study. Nanomaterials (Basel). 2022;12. |
|
|
|
|
|
5.
Reeh ES, Messer HH, Douglas WH. Reduction in Tooth Stiffness as a Result of
Endodontic and Restorative Procedures. J Endod. 1989;15:512-516. |
|
|
|
|
|
6.
Zotti F, Hu J, Zangani A, Albanese M, Paganelli C. Fracture Strenght and
Ribbond Fibers: In Vitro Analysis of Mod Restorations. J Clin Exp Dent. 2023;15:e318-e323. |
|
|
|
|
|
7.
Gale MS, Darvell BW. Thermal Cycling Procedures for Laboratory Testing of
Dental Restorations. J Dent 1999;27:89-99. |
|
|
|
|
|
8.
Del Bel Cury AA, da Costa WF. (Restoration of Endodontically Treated Teeth).
Rev Faculdade Odontol Lins. 1990;3:22-27. |
|
|
|
|
|
9.
Brauner E, DI Cosola M, Ambrosino M, Cazzolla AP, Dioguardi M, Nocini R, et
al. Efficacy of Bioactivated Anticalculus Toothpaste on Oral Health: A
Single-Blind, Parallel-Group Clinical Study. Minerva dental and oral science.
2022;71:31-38. |
|
|
|
|
|
10.
Lombardo G, Pardo A, Signoretto C, Signoriello A, Simeoni E, Rovera A, et al.
Hyperbaric Oxygen Therapy for the Treatment of Moderate to Severe
Periodontitis: A Clinical Pilot Study. Undersea Hyperb Med. 2020;47:571-580. |
|
|
|
|
|
11.
Lombardo G, Signoriello A, Marincola M, Nocini PF. Assessment of Peri-Implant
Soft Tissues Conditions around Short and Ultra-Short Implant-Supported Single
Crowns: A 3-Year Retrospective Study on Periodontally Healthy Patients and
Patients with a History of Periodontal Disease. Int J Environ Res Public
Health. 2020;17. |
|
|
|
|
|
12.
Pardo A, Signoriello A, Signoretto C, Messina E, Carelli M, Tessari M, et al.
Detection of Periodontal Pathogens in Oral Samples and Cardiac Specimens in
Patients Undergoing Aortic Valve Replacement: A Pilot Study. J Clin Med.
2021;10:3874. |
|
|
|
|
|
13.
Morresi AL, D'Amario M, Capogreco M, Gatto R, Marzo G, D'Arcangelo C, Monaco
A, et al. Thermal Cycling for Restorative Materials: Does a Standardized
Protocol Exist in Laboratory Testing? A Literature Review. J Mech Behav
Biomed Mater. 2014;29:295-308. |
|
|
|
|
|
14.
Carreira M, Antunes PV, Ramalho A, Paula A, Carrilho E. Thermocycling Effect
on Mechanical and Tribological Characterization of Two Indirect Dental
Restorative Materials. Journal of the Brazilian Society of Mechanical
Sciences and Engineering. 2017;39:1-17. |
|
|
|
|
|
15.
Watts DC, el Mowafy OM, Grant AA. Fracture Resistance of Lower Molars with
Class 1 Composite and Amalgam Restorations. Dent Mater. 1987;3:261-264. |
|
|
|
|
|
16.
Sun T, Shao B, Liu Z. Effects of the Lining Material, Thickness and Coverage
on Residual Stress of Class II Molar Restorations by Multilayer Technique.
Comput Methods Programs Biomed. 2021;202:105995. |
|
|
|
|
|
17.
Rajaraman G, Senthil Eagappan AR, Bhavani S, Vijayaraghavan R, Harishma S,
Jeyapreetha P. Comparative Evaluation of Fracture Resistance of
Fiber-Reinforced Composite and Alkasite Restoration in Class I Cavity.
Contemp Clin Dent. 2022;13:56-60. |
|
|
|
|
|
18.
Bonilla ED, Hayashi M, Pameijer CH, Le NV, Morrow BR, Garcia-Godoy F. The
Effect of Two Composite Placement Techniques on Fracture Resistance of MOD
Restorations with Various Resin Composites. J Dent. 2020;101:103348. |
|
|
|
|
|
19.
Chuang SF, Liu JK, Chao CC, Liao FP, Chen YH. Effects of Flowable Composite
Lining and Operator Experience on Microleakage and Internal Voids in Class II
Composite Restorations. J Prosthet Dent. 2001;85:177-183. |
|
|
|
|
|
20.
Xu HH, Smith DT, Jahanmir S, Romberg E, Kelly JR, Thompson VP, et al.
Indentation Damage and Mechanical Properties of Human Enamel and Dentin. J
Dent Res. 1998;77:472-480. |
|
|
|
|
|
21.
Watts DC, el Mowafy OM, Grant AA. Fracture Resistance of Lower Molars with
Class 1 Composite and Amalgam Restorations. Dent Mater. 1987;3:261-264. |
|
|
|
|
|
22.
Mondelli J, Steagall L, Ishikiriama A, de Lima Navarro MF, Soares FB.
Fracture Strength of Human Teeth with Cavity Preparations. J Prosthet Dent.
1980;43:419-422. |
|
|
|
|
|
23.
Bechtle S, Fett T, Rizzi G, Habelitz S, Klocke A, Schneider GA. Crack Arrest
within Teeth at the Dentinoenamel Junction Caused by Elastic Modulus
Mismatch. Biomaterials. 2010;31:4238-4247. |
|
|
|
|
|
24.
Guerra L, Ramos RQ, Linhares LA, Bernardon JK, Favero SS, César PF, et al.
Fracture Load of Molars Restored with Bulk-Fill, Flowable Bulk-Fill, and
Conventional Resin Composite After Simulated Chewing. Oper Dent.
2023;48:294-303. |
|
|
|
|
|
25.
Amaral FLB, Colucci V, Palma-Dibb RG, Corona SAM. Assessment of in Vitro
Methods Used to Promote Adhesive Interface Degradation: A Critical Review. J
Esthet Restor Dent. 2007;19:340-353. |
|
|
|
|
|
26.
Caron GA, Murchison DF, Cohen RB, Broome JC. Resistance to Fracture of Teeth
with Various Preparations for Amalgam. J Dent. 1996;24:407-410. |
|
|
|
|
|
27.
Guerra L, Ramos RQ, Linhares LA, Bernardon JK, Favero SS, César PF, et al.
Fracture Load of Molars Restored with Bulk-Fill, Flowable Bulk-Fill, and
Conventional Resin Composite After Simulated Chewing. Oper Dent.
2023;48:294-303. |
|