Pereira ALC, de Souza BBTLC, de Miranda LM, Curinga MRS, de Sousa LC, de Queiroz EEF, Barão VAR, Carreiro AFP. Evaluation of the bond strength, surface roughness and wettability between 3D-printed denture base resin to denture lining material to different surface treatments. J Clin Exp Dent. 2025;17(3):e249-58.

doi:10.4317/jced.62350

___

References

1. Lau M, Amarnath GS, Muddugangadhar BC, Swetha UM, Das Kumar KAA. Tensile and shear bond strength of hard and soft denture relining materials to the conventional heat cured acrylic denture base resin: An in-vitro study. J Int Oral Health. 2014;6:55-61. PMid:24876703 PMCid:PMC4037796

2. Naing MS, Hein AT, Ko ML, Swe T. Effectiveness of hard liner in poorly fitting lower complete denture. Myanmar Dental J. 2021;27:36-44.

3. D, Kamnoedboon P, Husain NA-H, Ozcan M, Srinivasan M. CAD-CAM complete denture resins: effect of relining on the shear bond strength. J Dent. 2023;131:104438. https://doi.org/10.1016/j.jdent.2023.104438 PMid:36717051

4. Pisani MX, Malheiros-Segundo AL, Balbino KL, de Souza RF, Paranhos HFO, da Silva CHL. Oral health related quality of life of edentulous patients after denture reling with a silicone-based soft liner. Gerodontology. 2012;29:e474-80. https://doi.org/10.1111/j.1741-2358.2011.00503.x PMid:21696442

5. Sônego MV, Neto CLMM, dos Santos DM, Moreno ALM, Bertoz APM, Goiato MC. Quality of life, satisfaction, occlusal force, and halitosis after direct and indirect relining of inferior complete dentures. Eur J Dent. 2022;215-222. https://doi.org/10.1055/s-0041-1731838 PMid:34428849 PMCid:PMC8890934

6. Kawano F, Dootz ER, Koran A, Craig RG. Comparison of bond strength of six soft denture liners to denture base resin. J Prosthet Dent. 1992;68:368-71. https://doi.org/10.1016/0022-3913(92)90347-D PMid:1501192

7. Kulak-Ozkan Y, SertgozA, Gedik H. Effect of thermocycling on tensile bond strength of six silicone-based resilient denture liners. J Prosthet Dent. 2003;89:303-10. https://doi.org/10.1067/mpr.2003.41 PMid:12644808

8. Minami H, Suzuki S, Ohashi H, Kurashige H, Tanaka T. Effect of surface treatment on the bonding of an autopolymerizing soft denture liner to a denture base resin. Int J Prosthodont. 2004;17:297-301. PMid:15237875

9. Mutluay MM, Ruyter IE. Evaluation of bond strength of soft relining materials to denture base polymers. Dent Mater. 2007;23:1373-81. https://doi.org/10.1016/j.dental.2006.11.014 PMid:17222898

10. Botega DM, Sanchez JLL, Mesquita MF, Henriques EP, Consani RLX. Effect of thermocycling on the tensile bond strength of three permanent soft denture liners. J Prosthodont. 2008;17:550-4. https://doi.org/10.1111/j.1532-849X.2008.00342.x PMid:18761576

11. Al-Athel MS, Jagger RG. Effect of test method on the bond strength of a silicone resilient denture lining material. J Prosthet Dent. 1996;76:535-40. https://doi.org/10.1016/S0022-3913(96)90014-1 PMid:8933446

12. Cucci AL, Rached RN, Giampaolo ET, Vergani CE. Tensile bond strengths of hard chairside reline resins as influenced by water storage. J Oral Rehabil. 1999;26:631-4. https://doi.org/10.1046/j.1365-2842.1999.00428.x PMid:10447815

13. Choi JE, Ng TE, Leong CKY, Kim H, Li P, Waddell JN. Adhesive evaluation of three types of resilient denture liners bonded to heat-polymerized, autopolymerized, or CAD-CAM acrylic resin denture bases. J Prosthet Dent. 2018;120:699-705. https://doi.org/10.1016/j.prosdent.2018.01.032 PMid:29961623

14. Ozdemir H, Ozdogan A. Bond strength of resilient lining materials to denture base resin: A systematic reviw and meta-analysis. J Prosthodont. 2018;27: 828-41. https://doi.org/10.1111/jopr.12958 PMid:30039888

15. Fatemi FS, Vojdani M, Khaledi A. The effect of food-stimulating agents on the bond strength of hard chairside reline materials to denture base resin. J Prosthodont. 2019;28:e357- 63. https://doi.org/10.1111/jopr.12905 PMid:29883009

16. Pow EH, Chow TW, Clark RK. Linear dimensional change of heat-cured acrylic resin complete dentures after reline and rebase. J Prosthet Dent. 1998;80:238-245. https://doi.org/10.1016/S0022-3913(98)70117-9 PMid:9710829

17. Ahmad F, Dent M, Yunus N. Shear bond strength of two chemically different denture base polymers to reline materials. J Prosthodont. 2009;18:596-602. https://doi.org/10.1111/j.1532-849X.2009.00481.x PMid:19515166

18. Goodacre CJ, Garbacea A, Naylor WP, Daher T, Marchack CB, Lowry J. CAD-CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data. J Prosthet Dent. 2012;107:34-46. https://doi.org/10.1016/S0022-3913(12)60015-8 PMid:22230914

19. Infante L, Yilmaz B, McGlumphy E, Finger I. Fabricating complete dentures with CAD- CAM technology. J Prosthet Dent. 2014;111:351-5. https://doi.org/10.1016/j.prosdent.2013.10.014 PMid:24461946

20. Steinmassl PA, Klaunzer F, Steinmassl O, Dumfahrt H, Grunert I. Evaluation of currently available CAD-CAM denture systems. Int J Prosthodont. 2017;30:116-22. https://doi.org/10.11607/ijp.5031 PMid:28267817

21. Steinmassl PA, Wiedemair V, Huck C, Klaunzer F, Steinmassl O, Grunert I, et al. Do CAD/CAM dentures really release less monomer than conventional dentures? Clin Oral Investig. 2017;21:1697-705. https://doi.org/10.1007/s00784-016-1961-6 PMid:27704295 PMCid:PMC5442236

22. Awad AN, Cho SH, Kesterke MJ, Chen JH. Comparison of tensile bond strength of denture reline materials on denture bases fabricated with CAD-CAM technology. J Prosthet Dent 2021;S0022-3913:00365-6. PMid:34373111

23. Wemken G, Burkhardt F, Spies BC, Kleinvogel L, Adali U, Sterzenbach G, Beuer F, Wesemann C. Bond strength of conventional, subtractive, and additive manufactured denture bases to soft and hard relining materials. Dent Mater. 2021;37:928-938. https://doi.org/10.1016/j.dental.2021.02.018 PMid:33722400

24. Park SJ, Lee JS. Effect of surface treatment on shear bond strength of relining material and 3D-printed denture base. J Adv Prosthodont. 2022;14:262-272. https://doi.org/10.4047/jap.2022.14.4.262 PMid:36105879 PMCid:PMC9444486

25. Consani RLX, Folli BL, Nogueira MCF, Correr AB, Mesquita MF. Effect of Polymerization Cycles on Gloss, Roughness, Hardness and Impact Strength of Acrylic Resins. Braz Dent J. 2016;27:176-80. https://doi.org/10.1590/0103-6440201600733 PMid:27058380

26. Haghi HR, Shiehzadeh M, Gharechahi J, Nodehi D, Karazhian A. Comparison of tensile bond strength of soft liners to an acrylic resin denture base with various curing methods and surface treatments. Int J Prosthodont. 2020;33:56-62. https://doi.org/10.11607/ijp.6272 PMid:31860914

27. Kulkarni RS, Parkhedkar R. The effect of denture base surface pretreatments on bond strengths of two long term resilient liners. J Adv Prosthodont. 2011;3:16-9. https://doi.org/10.4047/jap.2011.3.1.16 PMid:21503188 PMCid:PMC3076568

28. Lepri CP, Palma-Dibb RG. Surface roughness and color change of a composite: influence of beverages and brushing. Dent Mater J. 2012;31:689-96. https://doi.org/10.4012/dmj.2012-063 PMid:22864226

29. Sousa-Lima RX, Santos KS, Silva LJA, Chaves LVF, Alonso RCB, Borges BCD. Can sterilization methods influence surface properties of resin composites? A purpose for previewing bias in laboratory. Microsc Res Tech. 2022;85:1101-1107. https://doi.org/10.1002/jemt.23979 PMid:34761484

30. Takahashi Y, Chai J. Assessment of shear bond strength between three denture reline materials and a denture base acrylic resin. Int J Prosthodont. 2001;14:531-535. PMid:12066699

31. Emmer TJ, Emmer TJ, Vaidynathan J, Vaidynathan TK. Bond strength of permanent soft denture liners bonded to the denture base. J Prosthet Dent. 1995;74:595-601. https://doi.org/10.1016/S0022-3913(05)80311-7 PMid:8778383

32. Wright P. S. Characterization of the rupture properties of denture soft lining materials. Journal of Dental Research. 1980;59:614-619. https://doi.org/10.1177/00220345800590031001 PMid:6937494

33. Sarac YS, Sarac D, Kulunk T, Kulunk S. The effect of chemical surface treatments of different denture base resins on the shear bond strength of denture repair. J Prosthet Dent. 2005;94:259-66. https://doi.org/10.1016/j.prosdent.2005.05.024 PMid:16126078

34. Vallittu PK, Lassila VP, Lappalainen R. Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin. J Prosthet Dent. 1994;72:639-43. https://doi.org/10.1016/0022-3913(94)90297-6 PMid:7853262

35. Li P, Kramer-Fernandez P, Klink A, Xu Y, Spintzyk S. Repairability of a 3D-printed denture base polymer: Effects of surface treatment and artificial aging on the shear bond strength. J Mech Behav Biomed Mater. 2021;114:104227. https://doi.org/10.1016/j.jmbbm.2020.104227 PMid:33279875

36. Lee CG, Lim JH, Liu Y, Afrashtehfar KI, Kim JE. Influence of hydrothermal aging on the shear bond strength of 3D-printed denture-base resin to different relining materials. J Mech Biomed Mater. 2024;149:106221. https://doi.org/10.1016/j.jmbbm.2023.106221 PMid:37976994

37. Memarian M, Shayestehmajd M. The effect of chemical and mechanical treatment of three denture base resin surface on the shear bond strength of denture repairs. Arch Oral Res. 2009;5:11-17. PMid:38296526

38. Vuorinen A-M, Dyer SR, Lassila LVJ, Vallittu PK. Bonding of BisGMA-TEGDMA- resin to bulk poly (paraphenylene) based rigid rod polymer. Compos Interfac. 2011;18:387-398. https://doi.org/10.1163/156855411X595807

39. Li P, Lambart AL, Stawarczyz B, Reymus M, Spintzyk S. Postpolymerization of a 3D- printed denture base polymer: impact of post-curing methods on surface characteristics, flexural strength, and cytotoxicity. J Dent. 2021;115:103856. https://doi.org/10.1016/j.jdent.2021.103856 PMid:34695506

40. Lee WJ, Jo YH, Yilmaz B, Yoon HI. Effect of build angle, resin layer thickness and viscosity on the surface properties and microbial adhesion of denture bases manufactured using digital light processing. J Dent. 2023;137:104608. https://doi.org/10.1016/j.jdent.2023.104608 PMid:37433380

41. Goodacre BJ, Goodacre CJ. Additive manufacturing for complete denture fabrication: a narrative review. J Prosthodont. 2022;31:47-51. https://doi.org/10.1111/jopr.13426 PMid:35313025

42. Al-Qarni FD, Gad MM. Printing accuracy and flexural properties of different 3D-printed denture base resins. Materials. 2022;15:2410. https://doi.org/10.3390/ma15072410 PMid:35407742 PMCid:PMC8999488

43. Lee WJ, Jo YH, Yilmaz B, Yoon HI. Effect of layer thickness, build angle, and viscosity on the mechanical properties and manufacturing trueness of denture base resin for digital light processing. J Dent. 2023;135:104598. https://doi.org/10.1016/j.jdent.2023.104598 PMid:37356562

44. Hata K, Ikeda H, Nagamatsu Y, Masaki C, Hosokawa R, Shimizu H. Development of dental poly (methyl methacrylate)-based resin for stereolithography additive manufacturing. Polymers (Basel). 2021;17:4435. https://doi.org/10.3390/polym13244435 PMid:34960985 PMCid:PMC8706392

45. Vyas A, Garg V, Ghosh SB, Bandyopadhyay-Ghosh S. Photopolymerizable resin-based 3D-printed biomedical composites: factors affecting resin viscosity. 2022;62:1435-1439. https://doi.org/10.1016/j.matpr.2022.01.172

46. Oyar P, Ulusoy M, Durkan R. Effects of repeated use of tungsten carbide burs on the surface roughness and contact angles of a CAD-CAM PMMA denture base resin. J Prosthet Dent. 2022;128:1358-1362. https://doi.org/10.1016/j.prosdent.2021.11.032 PMid:35012770

47. El-Hadary A, Drummond JL. Comparative study of water sorption, solubility, and tensile bond strength of two soft lining materials. J Prosthet Dent. 2000;83:356-61. https://doi.org/10.1016/S0022-3913(00)70140-5 PMid:10709046

48. León BLT, Del Bel Cury AA, Garcia RCMR. Water sorption, solubility, and tensile bond strength of resilient denture lining materials polymerized by different methods after thermal cycling. J Prosthet Dent. 2005;93:282-7. https://doi.org/10.1016/j.prosdent.2004.11.014 PMid:15775930

49. Kawano F, Dootz ER, Koran A, Craig RG. Comparison of bond strength of six soft denture liners to denture base resin. J Prosthet Dent. 1992;68:368-71. https://doi.org/10.1016/0022-3913(92)90347-D PMid:1501192